Skip to main content

An SNMP MIB extension to RFC3591 to manage optical parameters, alarms and performance monitoring of DWDM applications
draft-galikunze-ccamp-opt-imp-snmp-mib-01

Document Type Expired Internet-Draft (individual)
Author Ruediger Kunze
Last updated 2014-01-30 (Latest revision 2013-07-29)
Stream (None)
Formats
Expired & archived
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

This memo defines a module of the Management Information Base (MIB) used by Simple Network Management Protocol (SNMP) in TCP/IP- based internets. In particular, it defines objects for managing Optical parameters associated with Dense Wavelength Division Multiplexing (DWDM) interfaces or characterized by the Optical Transport Network (OTN). This is an extension of the RFC3591 to support the optical parameters mainly but not only described in recommendations like ITU-T G.698.2. [ITU.G698.2] The MIB module defined in this memo can be used for Optical Parameters monitoring and/or configuration of the endpoints of Black Links.

Authors

Ruediger Kunze

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)