A SNMP MIB to manage the optical parameters caracteristic of a DWDM Black-Link

Document Type Expired Internet-Draft (individual)
Last updated 2011-02-18
Stream (None)
Intended RFC status (None)
Expired & archived
plain text pdf html bibtex
Stream Stream state (No stream defined)
Consensus Boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at


This memo defines a portion of the Management Information Base (MIB) used by Simple Network Management Protocol (SNMP) in TCP/IP- based internets. In particular, it defines objects for managing Optical Interfaces associated with Wavelength Division Multiplexing (WDM) systems or characterized by the Optical Transport Network (OTN) in accordance with the Black-Link approach defined in ITU-T Recommendation G.698. [ITU.G698.2] The MIB module defined in this memo can be used for Optical Parameters monitoring and/or configuration of such optical interface. Copyright Notice Copyright (c) 2011 IETF Trust and the persons identified as the document authors. All rights reserved. Note to RFC Editor re: [TEMPLATE TODO] markers Note to RFC Editor: When a document is developed using this template, the editor of the document should replace or remove all the places marked [TEMPLATE TODO] before submitting the document. If there are still [TEMPLATE TODO] markers, please send the document back to the editor.


Gabriele Galimberti (ggalimbe@cisco.com)
Ruediger Kunze (RKunze@telekom.de)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)