%% You should probably cite draft-ietf-spring-stamp-srpm instead of this I-D.
@techreport{gandhi-spring-stamp-srpm-06,
    number =    {draft-gandhi-spring-stamp-srpm-06},
    type =      {Internet-Draft},
    institution =   {Internet Engineering Task Force},
    publisher = {Internet Engineering Task Force},
    note =      {Work in Progress},
    url =       {https://datatracker.ietf.org/doc/draft-gandhi-spring-stamp-srpm/06/},
    author =    {Rakesh Gandhi and Clarence Filsfils and Daniel Voyer and Mach Chen and Bart Janssens and Richard "Footer" Foote},
    title =     {{Performance Measurement Using Simple TWAMP (STAMP) for Segment Routing Networks}},
    pagetotal = 23,
    year =      ,
    month =     ,
    day =       ,
    abstract =  {Segment Routing (SR) leverages the source routing paradigm. SR is applicable to both Multiprotocol Label Switching (SR-MPLS) and IPv6 (SRv6) data planes. This document describes procedures for Performance Measurement in SR networks using the mechanisms defined in RFC 8762 (Simple Two-Way Active Measurement Protocol (STAMP)) and its optional extensions defined in RFC 8972 and further augmented in draft-gandhi-ippm-stamp-srpm. The procedure described is applicable to SR-MPLS and SRv6 data planes and is used for both links and end- to-end SR paths including SR Policies.},
}