Skip to main content

Extension to the Link Management Protocol (LMP/DWDM -rfc4209) for Dense Wavelength Division Multiplexing (DWDM) Optical Line Systems to manage the application code of optical interface parameters in DWDM application
draft-ggalimbe-ccamp-flex-if-lmp-10

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft whose latest revision state is "Active".
Expired & archived
Authors Dharini Hiremagalur , Gert Grammel , Gabriele Galimberti , Ruediger Kunze
Last updated 2020-11-16 (Latest revision 2020-05-09)
RFC stream (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

This experimental memo defines extensions to LMP(rfc4209) for managing Optical parameters associated with Wavelength Division Multiplexing (WDM) adding a set of parameters related to multicarrier DWDM interfaces to be used in Spectrum Switched Optical Networks (sson).

Authors

Dharini Hiremagalur
Gert Grammel
Gabriele Galimberti
Ruediger Kunze

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)