RTP Payload Format for Uncompressed Video
draft-gharai-avt-uncomp-video-00
| Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Dr. Ladan Gharai , Charles E. Perkins | ||
| Last updated | 2009-02-24 (Latest revision 2002-06-24) | ||
| Replaced by | draft-ietf-avt-uncomp-video | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-avt-uncomp-video | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This memo specifies a packetization scheme for encapsulating uncompressed HDTV as defined by SMPTE 274M and SMPTE 296M into a payload format for the Real-Time Transport Protocol (RTP). SMPTE 274M and SMPTE 296M define the analog and digital representation of HDTV with image formats of 1920x1080 and 1280x720, respectively. The payload has been designed such that it may scale to future higher resolutions, suhc as Digital Cinema.
Authors
Dr. Ladan Gharai
Charles E. Perkins
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)