Skip to main content

Egress Peer Engineering using BGP-LU
draft-gredler-idr-bgplu-epe-13

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
Authors Hannes Gredler , Kaliraj Vairavakkalai , Chandrasekar R , Balaji Rajagopalan , Ebben Aries , Luyuan Fang
Last updated 2021-07-01 (Latest revision 2020-12-28)
RFC stream (None)
Formats
Stream Stream state (No stream defined)
Consensus boilerplate Unknown
RFC Editor Note (None)
IESG IESG state Expired
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:

Abstract

The MPLS source routing paradigm provides path control for both intra- and inter- Autonomous System (AS) traffic. RSVP-TE is utilized for intra-AS path control. This documents outlines how MPLS routers may use the BGP labeled unicast protocol (BGP-LU) for doing traffic-engineering on inter-AS links.

Authors

Hannes Gredler
Kaliraj Vairavakkalai
Chandrasekar R
Balaji Rajagopalan
Ebben Aries
Luyuan Fang

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)