Indication of Client Failure in MPLS-TP
draft-he-mpls-tp-csf-03
| Document | Type |
Replaced Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | Han Li , Elisa Bellagamba | ||
| Last updated | 2011-07-26 (Latest revision 2010-11-18) | ||
| Replaced by | draft-ietf-mpls-tp-csf | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Replaced by draft-ietf-mpls-tp-csf | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes a Multi-Protocol Label Switching Transport Profile (MPLS-TP) Operations, Administration and Maintenance (OAM) tool to propagate a client failure indication across an MPLS-TP network in case the propagation of failure status in the client layer is not supported as required in [RFC5860].
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)