Expanding the IPv6 Lab Use Space
draft-horley-v6ops-lab-02
| Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
|
|
|---|---|---|---|
| Authors | Ed Horley , Tom Coffeen , Scott Hogg , Nick Buraglio , Chris Cummings , Kevin Myers , Russ White | ||
| Last updated | 2022-07-30 (Latest revision 2022-01-26) | ||
| RFC stream | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
To reduce the likelihood of addressing conflicts and confusion between lab deployments and non-lab (i.e., production) deployments, an IPv6 unicast address prefix is reserved for use in lab, proof-of- concept, and validation networks as well as for any similar use case. This document describes the use of the IPv6 address prefix 0200::/7 as a prefix reserved for this purpose (repurposing the deprecated OSI NSAP-mapped prefix).
Authors
Ed Horley
Tom Coffeen
Scott Hogg
Nick Buraglio
Chris Cummings
Kevin Myers
Russ White
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)