I2RS overlay use case
draft-hu-i2rs-overlay-use-case-05
| Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
|---|---|---|---|
| Authors | fangwei hu , Bhumip Khasnabish , Chunming Wu | ||
| Last updated | 2015-07-30 (Latest revision 2015-01-26) | ||
| RFC stream | (None) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document proposes an overlay network use case for interface to routing system (I2RS). The forwarding routers network is assumed to be an overlay structure. There are two types of forwarding routers: Edge Router(ER) and Core Routers(CR). Edge Router encapsulates format data based on the tunnel type, which are established among Edge Routers. Core Router would be very simple and cheap. CRs focus on the encapsulation data forwarding. In order to reduce the overall ER costs, the use of network virtualization is proposed in this document.
Authors
fangwei hu
Bhumip Khasnabish
Chunming Wu
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)