Simple DHCP for 6LoWPAN Networks
draft-hui-6lowpan-dhcp-00
Document | Type |
Expired Internet-Draft
(individual)
Expired & archived
|
|
---|---|---|---|
Author | Jonathan Hui | ||
Last updated | 2010-03-22 | ||
RFC stream | (None) | ||
Intended RFC status | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
6LoWPAN nodes may find it useful to utilize DHCPv6 to obtain configuration parameters. In addition to network-layer information that any IPv6 node may require, 6LoWPAN nodes may find DHCP useful for obtaining link-specific parameters such as short link addresses or 6LoWPAN header compression contexts. Both stateful and stateless configuration DHCP modes may be useful in 6LoWPAN networks. This document describes a simplified form of DHCPv6 for use in 6LoWPAN networks.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)