Using RPL Headers Without IP-in-IP
draft-hui-6man-rpl-headers-00
| Document | Type | Expired Internet-Draft (individual) | |
|---|---|---|---|
| Authors | Jonathan Hui , Pascal Thubert , JP Vasseur | ||
| Last updated | 2010-07-28 | ||
| Stream | (None) | ||
| Formats |
Expired & archived
plain text
htmlized
pdfized
bibtex
|
||
| Stream | Stream state | (No stream defined) | |
| Consensus boilerplate | Unknown | ||
| RFC Editor Note | (None) | ||
| IESG | IESG state | Expired | |
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
https://www.ietf.org/archive/id/draft-hui-6man-rpl-headers-00.txt
Abstract
Routing for Low Power and Lossy Networks (RPL) is a routing protocol designed for Low power and Lossy Networks (LLNs). RPL includes routing information in IPv6 data plane datagrams to help maintain the routing topology. When forwarding a datagram into a RPL domain, a RPL router may need to expand the datagram to include routing information in IPv6 Extension headers. A generic solution has been defined that uses IP-in-IP tunneling to include RPL routing information. This document describes an alternative to inserting and removing RPL information in datagrams without the use of IP-in-IP tunneling.
Authors
Jonathan Hui
Pascal Thubert
JP Vasseur
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)