Stub Router Flag in ICMPv6 Router Advertisement Messages
draft-hui-stub-router-ra-flag-01
Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Replaced".
Expired & archived
|
|
---|---|---|---|
Author | Jonathan Hui | ||
Last updated | 2023-08-31 (Latest revision 2023-02-27) | ||
RFC stream | (None) | ||
Formats | |||
Stream | Stream state | (No stream defined) | |
Consensus boilerplate | Unknown | ||
RFC Editor Note | (None) | ||
IESG | IESG state | Expired | |
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document defines a new Stub Router flag in the Router Advertisement message to distinguish configuration information sent by stub routers from infrastructure routers. For example, the Stub Router flag allows stub routers to easily identify when an infrastructure router is advertising a usable IPv6 prefix, triggering the stub router to not advertise its own routable prefix.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)