6tisch Zero-Touch Secure Join protocol
draft-ietf-6tisch-dtsecurity-zerotouch-join-03
| Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Expired".
Expired & archived
|
|
|---|---|---|---|
| Author | Michael Richardson | ||
| Last updated | 2019-04-25 (Latest revision 2018-10-22) | ||
| Replaces | draft-ietf-6tisch-dtsecurity-secure-join | ||
| RFC stream | Internet Engineering Task Force (IETF) | ||
| Formats | |||
| Additional resources | Mailing list discussion | ||
| Stream | WG state | WG Document | |
| Document shepherd | Pascal Thubert | ||
| IESG | IESG state | Expired | |
| Consensus boilerplate | Unknown | ||
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | Pascal Thubert <pthubert@cisco.com> |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes a Zero-touch Secure Join (ZSJ) mechanism to enroll a new device (the "pledge") into a IEEE802.15.4 TSCH network using the 6tisch signaling mechanisms. The resulting device will obtain a domain specific credential that can be used with either 802.15.9 per-host pair keying protocols, or to obtain the network- wide key from a coordinator. The mechanism describe here is an augmentation to the one-touch mechanism described in [I-D.ietf-6tisch-minimal-security], and a constrained version of [I-D.ietf-anima-bootstrapping-keyinfra].
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)