xDSL Multi-Pair Bonding (G.Bond) MIB
draft-ietf-adslmib-gbond-mib-11

Approval announcement
Draft of message to be sent after approval:

Announcement

From: The IESG <iesg-secretary@ietf.org>
To: IETF-Announce <ietf-announce@ietf.org>
Cc: RFC Editor <rfc-editor@rfc-editor.org>,
    adslmib mailing list <adslmib@ietf.org>,
    adslmib chair <adslmib-chairs@tools.ietf.org>
Subject: Protocol Action: 'xDSL multi-pair bonding (G.Bond) MIB' to Proposed Standard (draft-ietf-adslmib-gbond-mib-11.txt)

The IESG has approved the following document:
- 'xDSL multi-pair bonding (G.Bond) MIB'
  (draft-ietf-adslmib-gbond-mib-11.txt) as Proposed Standard

This document is the product of the ADSL MIB Working Group.

The IESG contact persons are Benoit Claise and Ronald Bonica.

A URL of this Internet Draft is:
http://datatracker.ietf.org/doc/draft-ietf-adslmib-gbond-mib/

Ballot Text

Technical Summary

   This document defines Management Information Base (MIB) module for
   use with network management protocols in TCP/IP-based internets.
   This document proposes an extension to the Interfaces Group MIB with
   a set of common objects for managing multi-pair bonded Digital
   Subscriber Line (xDSL) interfaces, defined in ITU-T recommendations
   G.998.1, G.998.2 and G.998.3.  The MIB modules specific to each
   bonding technology are defined in GBOND-ATM-MIB, GBOND-ETH-MIB and
   GBOND-TDIM-MIB respectively.

Working Group Summary

   The WG process was smooth with no real controversies.
   All work took place on the mailing list. 

Document Quality

   No information is available about implementations. 

Personnel

   Menachem Dodge is the Document Shepherd for this document
   Dan Romascanu was the first responsible Area Director.
   Benoit Claise is the current responsible Area Director.

RFC Editor Note