Skip to main content

JSON Merge Patch
draft-ietf-appsawg-json-merge-patch-05

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft that was ultimately published as RFC 7386.
Authors Paul E. Hoffman , James M. Snell
Last updated 2014-07-23 (Latest revision 2014-07-21)
Replaces draft-snell-merge-patch
RFC stream Internet Engineering Task Force (IETF)
Formats
Reviews
Additional resources Mailing list discussion
Stream WG state Submitted to IESG for Publication
Document shepherd Murray Kucherawy
Shepherd write-up Show Last changed 2014-07-23
IESG IESG state Became RFC 7386 (Proposed Standard)
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD Barry Leiba
Send notices to appsawg-chairs@tools.ietf.org, draft-ietf-appsawg-json-merge-patch@tools.ietf.org, apps-discuss@ietf.org
draft-ietf-appsawg-json-merge-patch-05
Applications Area Working Group                               P. Hoffman
Internet-Draft                                            VPN Consortium
Intended status: Standards Track                                J. Snell
Expires: January 22, 2015
                                                           July 21, 2014

                            JSON Merge Patch
                 draft-ietf-appsawg-json-merge-patch-05

Abstract

   This specification defines the JSON merge patch format and processing
   rules.  The merge patch format is primarily intended for use with the
   HTTP PATCH method as a means of describing a set of modifications to
   a target resource's content.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on January 22, 2015.

Copyright Notice

   Copyright (c) 2014 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Hoffman & Snell         Expires January 22, 2015                [Page 1]
Internet-Draft           application/merge-patch               July 2014

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Processing Merge Patch Documents  . . . . . . . . . . . . . .   3
   3.  Example . . . . . . . . . . . . . . . . . . . . . . . . . . .   4
   4.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .   5
   5.  Security Considerations . . . . . . . . . . . . . . . . . . .   6
   6.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .   6
   7.  References  . . . . . . . . . . . . . . . . . . . . . . . . .   6
     7.1.  Normative References  . . . . . . . . . . . . . . . . . .   6
     7.2.  Informative References  . . . . . . . . . . . . . . . . .   7
   Appendix A.  Example Test Cases . . . . . . . . . . . . . . . . .   7
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .   9

1.  Introduction

   This specification defines the JSON merge patch document format,
   processing rules, and associated MIME media type identifier.  The
   merge patch format is primarily intended for use with the HTTP PATCH
   method [RFC5789] as a means of describing a set of modifications to a
   target resource's content.

   A JSON merge patch document describes changes to be made to a target
   JSON document using a syntax that closely mimics the document being
   modified.  Recipients of a merge patch document determine the exact
   set of changes being requested by comparing the content of the
   provided patch against the current content of the target document.
   If the provided merge patch contains members that do not appear
   within the target, those members are added.  If the target does
   contain the member, the value is replaced.  Null values in the merge
   patch are given special meaning to indicate the removal of existing
   values in the target.

   For example, given the following original JSON document:

     {
       "a": "b",
       "c": {
         "d": "e",
         "f": "g"
       }
     }

Hoffman & Snell         Expires January 22, 2015                [Page 2]
Internet-Draft           application/merge-patch               July 2014

   Changing the value of "a" and removing "f" can be achieved by
   sending:

     PATCH /target HTTP/1.1
     Host: example.org
     Content-Type: application/merge-patch+json

     {
       "a":"z",
       "c": {
         "f": null
       }
     }

   When applied to the target resource, the value of the "a" member is
   replaced with "z" and "f" is removed, leaving the remaining content
   untouched.

   This design means that merge patch documents are suitable for
   describing modifications to JSON documents that primarily use objects
   for their structure and do not make use of explicit null values.  The
   merge patch format is not appropriate for all JSON syntaxes.

   In this document, the key words "MUST", "MUST NOT", "REQUIRED",
   "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY",
   and "OPTIONAL" are to be interpreted as described in [RFC2119].

2.  Processing Merge Patch Documents

   JSON merge patch documents describe, by example, a set of changes
   that are to be made to a target resource.  Recipients of merge patch
   documents are responsible for comparing the merge patch with the
   current content of the target resource to determine the specific set
   of change operations to be applied to the target.

   To apply the merge patch document to a target resource, the system
   MUST realize the effect of the following function, described in
   pseudocode.  For this description, the function is called MergePatch,
   and it takes two arguments: the target resource document and the
   merge patch document.  The Target argument can be any JSON value, or
   undefined.  The Patch argument can be any JSON value.

Hoffman & Snell         Expires January 22, 2015                [Page 3]
Internet-Draft           application/merge-patch               July 2014

   define MergePatch(Target, Patch):
     if Patch is an Object:
       if Target is not an Object:
         Target = {} # Ignore the contents and set it to an empty Object
       for each Name/Value pair in Patch:
         if Value is null:
           if Key exists in Target:
             remove the Name/Value pair from Target
         else:
           Target[Name] = MergePatch(Target[Name], Value)
       return Target
     else:
       return Patch

   The MergePatch operation is defined to operate at at the level of
   data items, not at the level of textural representation.  There is no
   expectation that the MergePatch operation will preserve textual
   representation-level features such as white space, member ordering,
   number precision beyond what is available in the target's
   implementation, and so forth.  In addition, even if the target
   implementation allows multiple name/value pairs with the same name,
   the result of the patch operation on such objects is not defined.

3.  Example

   For example, given the following example JSON document:

     {
       "title": "Goodbye!",
       "author" : {
         "givenName" : "John",
         "familyName" : "Doe"
       },
       "tags":[ "example", "sample" ],
       "content": "This will be unchanged"
     }

   A user-agent wishing to change the value of the "title" member from
   "Goodbye!" to the value "Hello!", add a new "phoneNumber" member,
   remove the "familyName" from the "author" object, and remove the word
   sample from the "tags" Array, would send the following request:

Hoffman & Snell         Expires January 22, 2015                [Page 4]
Internet-Draft           application/merge-patch               July 2014

     PATCH /my/resource HTTP/1.1
     Host: example.org
     Content-Type: application/merge-patch+json

     {
       "title": "Hello!",
       "phoneNumber": "+01-123-456-7890",
       "author": {
         "familyName": null
       },
       "tags": [ "example" ]
     }

   The resulting JSON document would be:

     {
       "title": "Hello!",
       "author" : {
         "givenName" : "John"
       },
       "tags": [ "example" ],
       "content": "This will be unchanged",
       "phoneNumber": "+01-123-456-7890"
     }

4.  IANA Considerations

   This specification registers the following additional MIME Media
   Types:

      Type name: application

      Subtype name: merge-patch+json

      Required parameters: None

      Optional parameters: None

      Encoding considerations: Resources that use the "application/
      merge-patch+json" media type are required to conform to the
      "application/json" Media Type and are therefore subject to the
      same encoding considerations specified in Section 8 of [RFC7159].

      Security considerations: As defined in this specification

      Published specification: This specification.

      Applications that use this media type: None currently known.

Hoffman & Snell         Expires January 22, 2015                [Page 5]
Internet-Draft           application/merge-patch               July 2014

      Additional information:

         Magic number(s): N/A

         File extension(s): N/A

         Macintosh file type code(s): TEXT

      Person & email address to contact for further information: IESG

      Intended usage: COMMON

      Restrictions on usage: None.

      Author: James M Snell <jasnell@gmail.com>

      Change controller: IESG

5.  Security Considerations

   The "application/merge-patch+json" Media Type allows user agents to
   indicate their intention that the server determine the specific set
   of change operations to be applied to a target resource.  As such, it
   is the server's responsibility to determine the appropriateness of
   any given change as well as the user agent's authorization to request
   such changes.  How such determinations are made is considered out of
   the scope of this specification.

   All of the the security considerations discussed in Section 5 of
   [RFC5789] apply to all uses of the HTTP PATCH method with the
   "application/merge-patch+json" Media Type.

6.  Acknowledgements

   Many people contributed significant ideas to this document.  These
   people include, but are not limited to, James Manger, Matt Miller,
   Carsten Bormann, and Bjoern Hoehrmann. [[ NOTE: If you contributed
   and we missed your name, please let us know. ]]

7.  References

7.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC7159]  Bray, T., "The JavaScript Object Notation (JSON) Data
              Interchange Format", RFC 7159, March 2014.

Hoffman & Snell         Expires January 22, 2015                [Page 6]
Internet-Draft           application/merge-patch               July 2014

7.2.  Informative References

   [RFC5789]  Dusseault, L. and J. Snell, "PATCH Method for HTTP", RFC
              5789, March 2010.

Appendix A.  Example Test Cases

Hoffman & Snell         Expires January 22, 2015                [Page 7]
Internet-Draft           application/merge-patch               July 2014

   ORIGINAL        PATCH            RESULT
   ------------------------------------------
   {"a":"b"}       {"a":"c"}       {"a":"c"}

   {"a":"b"}       {"b":"c"}       {"a":"b",
                                    "b":"c"}

   {"a":"b"}       {"a":null}      {}

   {"a":"b",       {"a":null}      {"b":"c"}
    "b":"c"}

   {"a":["b"]}     {"a":"c"}       {"a":"c"}

   {"a":"c"}       {"a":["b"]}     {"a":["b"]}

   {"a": {         {"a": {         {"a": {
     "b": "c"}       "b": "d",       "b": "d"
   }                 "c": null}      }
                   }               }

   {"a": [         {"a": [1]}      {"a": [1]}
     {"b":"c"}
    ]
   }

   ["a","b"]       ["c","d"]       ["c","d"]

   {"a":"b"}       ["c"]           ["c"]

   {"a":"foo"}     null            null

   {"a":"foo"}     "bar"           "bar"

   {"e":null}      {"a":1}         {"e":null,
                                    "a":1}

   [1,2]           {"a":"b",       {"a":"b"}
                    "c":null}

   {}              {"a":            {"a":
                    {"bb":           {"bb":
                     {"ccc":          {}}}
                      null}}}

Hoffman & Snell         Expires January 22, 2015                [Page 8]
Internet-Draft           application/merge-patch               July 2014

Authors' Addresses

   Paul Hoffman
   VPN Consortium

   Email: paul.hoffman@vpnc.org

   James M Snell

   Email: jasnell@gmail.com

Hoffman & Snell         Expires January 22, 2015                [Page 9]