Skip to main content

JavaScript Object Notation (JSON) Pointer
draft-ietf-appsawg-json-pointer-09

The information below is for an old version of the document that is already published as an RFC.
Document Type
This is an older version of an Internet-Draft that was ultimately published as RFC 6901.
Authors Paul C. Bryan , Kris Zyp , Mark Nottingham
Last updated 2015-10-14 (Latest revision 2013-01-21)
Replaces draft-pbryan-zyp-json-pointer
RFC stream Internet Engineering Task Force (IETF)
Intended RFC status Proposed Standard
Formats
Reviews
Additional resources Mailing list discussion
Stream WG state Submitted to IESG for Publication
Document shepherd Murray Kucherawy
Shepherd write-up Show Last changed 2012-12-10
IESG IESG state Became RFC 6901 (Proposed Standard)
Action Holders
(None)
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD Barry Leiba
Send notices to (None)
draft-ietf-appsawg-json-pointer-09
Applications Area Working Group                            P. Bryan, Ed.
Internet-Draft                                            Salesforce.com
Intended status: Standards Track                                  K. Zyp
Expires: July 26, 2013                                     SitePen (USA)
                                                      M. Nottingham, Ed.
                                                                  Akamai
                                                        January 22, 2013

               JavaScript Object Notation (JSON) Pointer
                   draft-ietf-appsawg-json-pointer-09

Abstract

   JSON Pointer defines a string syntax for identifying a specific value
   within a JavaScript Object Notation (JSON) document.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on July 26, 2013.

Copyright Notice

   Copyright (c) 2013 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Bryan, et al.             Expires July 26, 2013                 [Page 1]
Internet-Draft                JSON Pointer                  January 2013

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . 3
   2.  Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . 3
   3.  Syntax  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
   4.  Evaluation  . . . . . . . . . . . . . . . . . . . . . . . . . . 3
   5.  JSON String Representation  . . . . . . . . . . . . . . . . . . 5
   6.  URI Fragment Identifier Representation  . . . . . . . . . . . . 6
   7.  Error Handling  . . . . . . . . . . . . . . . . . . . . . . . . 7
   8.  IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 7
   9.  Security Considerations . . . . . . . . . . . . . . . . . . . . 7
   10. Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . 7
   11. References  . . . . . . . . . . . . . . . . . . . . . . . . . . 8
     11.1.  Normative References . . . . . . . . . . . . . . . . . . . 8
     11.2.  Informative References . . . . . . . . . . . . . . . . . . 8
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . . . 8

Bryan, et al.             Expires July 26, 2013                 [Page 2]
Internet-Draft                JSON Pointer                  January 2013

1.  Introduction

   This specification defines JSON Pointer, a string syntax for
   identifying a specific value within a JavaScript Object Notation
   (JSON) [RFC4627] document.  It is intended to be easily expressed in
   JSON string values as well as Uniform Resource Identifier (URI)
   [RFC3986] fragment identifiers.

2.  Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   This specification expresses normative syntax rules using Augmented
   Backus-Naur Form (ABNF) [RFC5234] notation.

3.  Syntax

   A JSON Pointer is a Unicode string (see [RFC4627], Section 3)
   containing a sequence of zero or more reference tokens, each prefixed
   by a '/' (%x2F) character.

   Because the characters '~' (%x7E) and '/' (%x2F) have special
   meanings in JSON Pointer, '~' needs to be encoded as '~0' and '/'
   needs to be encoded as '~1' when these characters appear in a
   reference token.

   The ABNF syntax of a JSON Pointer is:

   json-pointer = *( "/" reference-token )
   reference-token = *( unescaped / escaped )
   unescaped = %x00-2E / %x30-7D / %x7F-10FFFF
     ; %x2F ('/') and %x7E ('~') are excluded from 'unescaped'
   escaped = "~" ( "0" / "1" )
     ; representing '~' and '/', respectively

   It is an error condition if a JSON Pointer value does not conform to
   this syntax (see Section 7).

   Note that JSON Pointers are specified in characters, not as bytes.

4.  Evaluation

   Evaluation of a JSON Pointer begins with a reference to the root

Bryan, et al.             Expires July 26, 2013                 [Page 3]
Internet-Draft                JSON Pointer                  January 2013

   value of a JSON document and completes with a reference to some value
   within the document.  Each reference token in the JSON Pointer is
   sequentially evaluated.

   Evaluation of each reference token begins by decoding any escaped
   character sequence; this is performed by first transforming any
   occurrence of the sequence '~1' to '/', then transforming any
   occurrence of the sequence '~0' to '~'.  By performing the
   substitutions in this order, an implementation avoids the error of
   turning '~01' first into '~1' and then into '/', which would be
   incorrect (the string '~01' correctly becomes '~1' after
   transformation).

   The reference token then modifies which value is referenced according
   to the following scheme:

   o  If the currently referenced value is a JSON object, the new
      referenced value is the object member with the name identified by
      the reference token.  The member name is equal to the token if it
      has the same number of Unicode characters as the token and their
      code points are position-wise equal.  No Unicode character
      normalization is performed.  If a referenced member name is not
      unique in an object, the member that is referenced is undefined,
      and evaluation fails (see below).

   o  If the currently referenced value is a JSON array, the reference
      token MUST contain either:

      *  characters comprised of digits (see ABNF below; note that
         leading zeros are not allowed) that represent an unsigned
         base-10 integer value, making the new referenced value the
         array element with the zero-based index identified by the
         token, or

      *  exactly the single character "-", making the new referenced
         value the (non-existant) member after the last array element.

   The ABNF syntax for array indices is:

   array-index = %x30 / ( %x31-39 *(%x30-39) )
                 ; "0", or digits without a leading "0"

   Implementations will evaluate each reference token against the
   document's contents, and will raise an error condition if it fails to
   resolve a concrete value for any of the JSON pointer's reference
   tokens.  For example, if an array is referenced with a non-numeric
   token, an error condition will be raised.  See Section 7 for details.

Bryan, et al.             Expires July 26, 2013                 [Page 4]
Internet-Draft                JSON Pointer                  January 2013

   Note that the use of the "-" character to index an array will always
   result in such an error condition because by definition it refers to
   a non-existent array element.  Applications of JSON Pointer thus need
   to specify how it is to be handled, if it is to be useful.

   Any error condition that does not have a specific action defined for
   it by the JSON Pointer application results in termination of
   evaluation.

5.  JSON String Representation

   A JSON Pointer can be represented in a JSON string value.  Per
   [RFC4627], Section 2.5, all instances of quotation mark '"' (%x22),
   reverse solidus '\' (%x5C) and control (%x00-1F) characters MUST be
   escaped.

   Note that before processing a JSON string as a JSON Pointer,
   backslash escape sequences must be unescaped.

   For example, given the JSON document

   {
      "foo": ["bar", "baz"],
      "": 0,
      "a/b": 1,
      "c%d": 2,
      "e^f": 3,
      "g|h": 4,
      "i\\j": 5,
      "k\"l": 6,
      " ": 7,
      "m~n": 8
   }

   Then the following JSON strings evaluate to the accompanying values:

Bryan, et al.             Expires July 26, 2013                 [Page 5]
Internet-Draft                JSON Pointer                  January 2013

    ""           // the whole document
    "/foo"       ["bar", "baz"]
    "/foo/0"     "bar"
    "/"          0
    "/a~1b"      1
    "/c%d"       2
    "/e^f"       3
    "/g|h"       4
    "/i\\j"      5
    "/k\"l"      6
    "/ "         7
    "/m~0n"      8

6.  URI Fragment Identifier Representation

   A JSON Pointer can be represented in a URI fragment identifier by
   encoding it into octets using UTF-8 [RFC3629], percent-encoding those
   characters not allowed by the fragment rule in [RFC3986].

   Note that a given media type needs to specify JSON Pointer as its
   fragment identifier syntax explicitly (usually, in its registration
   [RFC4288]); i.e., just because a document is JSON does not imply that
   JSON Pointer can be used as its fragment identifier syntax.  In
   particular, the fragment identifier syntax for application/json is
   not JSON Pointer.

   Given the same example document as above, the following URI fragment
   identifiers evaluate to the accompanying values:

    #            // the whole document
    #/foo        ["bar", "baz"]
    #/foo/0      "bar"
    #/           0
    #/a~1b       1
    #/c%25d      2
    #/e%5Ef      3
    #/g%7Ch      4
    #/i%5Cj      5
    #/k%22l      6
    #/%20        7
    #/m~0n       8

Bryan, et al.             Expires July 26, 2013                 [Page 6]
Internet-Draft                JSON Pointer                  January 2013

7.  Error Handling

   In the event of an error condition, evaluation of the JSON Pointer
   fails to complete.

   This includes, but is not limited to:

   o  Invalid pointer syntax

   o  A pointer that references a non-existent value

   This specification does not define how errors are handled; an
   application of JSON Pointer SHOULD specify the impact and handling of
   each type of error.

   For example, some applications might stop pointer processing upon an
   error; others may attempt to recover from missing values by inserting
   default ones.

8.  IANA Considerations

   This document has no impact upon IANA.

9.  Security Considerations

   A given JSON Pointer is not guaranteed to reference an actual JSON
   value.  Therefore, applications using JSON Pointer should anticipate
   this by defining how a pointer that does not resolve ought to be
   handled.

   Note that JSON pointers can contain the NUL (Unicode U+0000)
   character.  Care is needed not to misinterpret this character in
   programming languages that use NUL to mark the end of a string.

10.  Acknowledgements

   The following individuals contributed ideas, feedback and wording to
   this specification:

      Mike Acar, Carsten Bormann, Tim Bray, Jacob Davies, Martin J.
      Duerst, Bjoern Hoehrmann, James H. Manger, Drew Perttula, Julian
      Reschke.

11.  References

Bryan, et al.             Expires July 26, 2013                 [Page 7]
Internet-Draft                JSON Pointer                  January 2013

11.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, November 2003.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66,
              RFC 3986, January 2005.

   [RFC4627]  Crockford, D., "The application/json Media Type for
              JavaScript Object Notation (JSON)", RFC 4627, July 2006.

   [RFC5234]  Crocker, D. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", STD 68, RFC 5234, January 2008.

11.2.  Informative References

   [RFC4288]  Freed, N. and J. Klensin, "Media Type Specifications and
              Registration Procedures", BCP 13, RFC 4288, December 2005.

Authors' Addresses

   Paul C. Bryan (editor)
   Salesforce.com

   Phone: +1 604 783 1481
   Email: pbryan@anode.ca

   Kris Zyp
   SitePen (USA)

   Phone: +1 650 968 8787
   Email: kris@sitepen.com

   Mark Nottingham (editor)
   Akamai

   Email: mnot@mnot.net

Bryan, et al.             Expires July 26, 2013                 [Page 8]