Partial Address Resolution in ATM Networks
draft-ietf-atm-address-resolve-00
| Document | Type |
Expired Internet-Draft
(ipatm WG)
Expired & archived
|
|
|---|---|---|---|
| Author | Subbu Subramaniam | ||
| Last updated | 1993-03-03 | ||
| RFC stream | Internet Engineering Task Force (IETF) | ||
| Intended RFC status | (None) | ||
| Formats | |||
| Additional resources | Mailing list discussion | ||
| Stream | WG state | WG Document | |
| Document shepherd | (None) | ||
| IESG | IESG state | Expired | |
| Consensus boilerplate | Unknown | ||
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This memo describes a method (called Partial Resolution Method) for resolving IP addresses to ATM addresses. It does not specify a particular Address Resolution Protocol. In fact, any server-based address resolution protocol can be used in conjunction with the method described in this document. The Partial Resolution Method attempts to reduce the number of round trips needed for ATM address resolution and subsequent connection establishment by taking advantage of the ATM signalling protocol.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)