Skip to main content

Definitions of Managed Objects for the DS1, E1, DS2, and E2 Interface Types

Approval announcement
Draft of message to be sent after approval:


From: The IESG <>
To: IETF-Announce <>
Cc: Internet Architecture Board <>,
    RFC Editor <>, 
    atommib mailing list <>, 
    atommib chair <>
Subject: Protocol Action: 'Definitions of Managed Objects for 
         the DS1, E1, DS2 and E2 Interface Types' to Proposed Standard 

The IESG has approved the following document:

- 'Definitions of Managed Objects for the DS1, E1, DS2 and E2 Interface 
   Types '
   <draft-ietf-atommib-rfc2495bis-07.txt> as a Proposed Standard

This document is the product of the AToM MIB Working Group. 

The IESG contact persons are Bert Wijnen and Dan Romascanu.

A URL of this Internet-Draft is:

Ballot Text

Technical Summary
  This memo defines a portion of the Management Information Base (MIB)
  for use with network management protocols in the Internet community.
  In particular, it describes objects used for managing DS1, E1, DS2
  and E2 interfaces.  This document is a companion to the documents
  that define Managed Objects for the DS0, DS3/E3 and Synchronous
  Optical Network/Synchronous Digital Hierarchy (SONET/SDH) Interface

  This document obsoletes RFC 2495. 

Working Group Summary
  The Working Group has consensus to publish this document as a Proposed
  Standard RFC.  A few new objects were added to this revised MIB module,
  so it could not advance with this revision.
Protocol Quality
  This document has been reviewed for the IESG by Mike Heard and Bert 

RFC Editor Note