Skip to main content

Definitions of Managed Objects for the DS3/E3 Interface Type

Approval announcement
Draft of message to be sent after approval:


From: The IESG <>
To: IETF-Announce <>
Cc: Internet Architecture Board <>,
    RFC Editor <>, 
    atommib mailing list <>, 
    atommib chair <>
Subject: Protocol Action: 'Definitions of Managed Objects for 
         the DS3/E3 Interface Type' to Proposed Standard 

The IESG has approved the following document:

- 'Definitions of Managed Objects for the DS3/E3 Interface Type '
   <draft-ietf-atommib-rfc2496bis-07.txt> as a Proposed Standard

This document is the product of the AToM MIB Working Group. 

The IESG contact persons are Bert Wijnen and Dan Romascanu.

A URL of this Internet-Draft is:

Ballot Text

Technical Summary
  This memo defines a portion of the Management Information Base (MIB)
  for use with network management protocols in the Internet community.
  In particular, it describes objects used for managing DS3 and E3
  interfaces.  This document is a companion to the documents that
  define Managed Objects for the DS0, DS1/E1/DS2/E2 and Synchronous
  Optical Network/Synchronous Digital Hierarchy (SONET/SDH) Interface

  This document entirely obsoletes RFC 2496.
Working Group Summary
  There is WG consensus for this document to be published as Proposed
  Standard RFC.  This document needs to stay at Proposed Standard for
  now because there are currently not enough implementation reports.
Protocol Quality
  This document has been reviewed for the IESG by Mike Heard and Bert 

RFC Editor Note