Usage and applicability of BGP MPLS based Ethernet VPN
draft-ietf-bess-evpn-usage-00

The information below is for an old version of the document
Document Type Expired Internet-Draft (bess WG)
Last updated 2015-05-17 (latest revision 2014-11-13)
Replaces draft-rp-l2vpn-evpn-usage
Stream IETF
Intended RFC status Informational
Formats
Expired & archived
plain text pdf html bibtex
Reviews
Stream WG state WG Document
Document shepherd No shepherd assigned
IESG IESG state Expired
Consensus Boilerplate Unknown
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-ietf-bess-evpn-usage-00.txt

Abstract

This document discusses the usage and applicability of BGP MPLS based Ethernet VPN (EVPN) in a simple and fairly common deployment scenario. The different EVPN procedures will be explained on the example scenario, analyzing the benefits and trade-offs of each option. Along with [EVPN], this document is intended to provide a simplified guide for the deployment of EVPN in Service Provider networks.

Authors

Jorge Rabadan (jorge.rabadan@alcatel-lucent.com)
Senad Palislamovic (senad.palislamovic@alcatel-lucent.com)
Wim Henderickx (wim.henderickx@alcatel-lucent.be)
Florin Balus (florin.balus@alcatel-lucent.com)
Keyur Patel (keyupate@cisco.com)
Ali Sajassi (sajassi@cisco.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)