%% You should probably cite draft-ietf-bess-service-chaining-06 instead of this revision. @techreport{ietf-bess-service-chaining-03, number = {draft-ietf-bess-service-chaining-03}, type = {Internet-Draft}, institution = {Internet Engineering Task Force}, publisher = {Internet Engineering Task Force}, note = {Work in Progress}, url = {https://datatracker.ietf.org/doc/draft-ietf-bess-service-chaining/03/}, author = {Rex Fernando and Stuart Mackie and Dhananjaya Rao and Bruno Rijsman and Maria Napierala and Thomas Morin}, title = {{Service Chaining using Virtual Networks with BGP VPNs}}, pagetotal = 41, year = 2017, month = jul, day = 3, abstract = {This document describes how service function chains (SFC) can be applied to traffic flows using routing in a virtual (overlay) network to steer traffic between service nodes. Chains can include services running in routers, on physical appliances or in virtual machines. Service chains have applicability at the subscriber edge, business edge and in multi-tenant datacenters. The routing function into SFCs and between service functions within an SFC can be performed by physical devices (routers), be virtualized inside hypervisors, or run as part of a host OS. A BGP control plane for route distribution is used to create virtual networks implemented using IP MPLS, VXLAN or other suitable encapsulation, where the routes within the virtual networks cause traffic to flow through a sequence of service nodes that apply packet processing functions to the flows. Two techniques are described: in one the service chain is implemented as a sequence of distinct VPNs between sets of service nodes that apply each service function; in the other, the routes within a VPN are modified through the use of special route targets and modified next-hop resolution to achieve the desired result. In both techniques, service chains can be created by manual configuration of routes and route targets in routing systems, or through the use of a controller which contains a topological model of the desired service chains. This document also contains discussion of load balancing between network functions, symmetric forward and reverse paths when stateful services are involved, and use of classifiers to direct traffic into a service chain.}, }