Skip to main content

Terminology for ATM ABR Benchmarking

The information below is for an old version of the document that is already published as an RFC.
Document Type
This is an older version of an Internet-Draft that was ultimately published as RFC 3134.
Authors Jeffrey H. Dunn , Cynthia E. Martin
Last updated 2013-03-02 (Latest revision 2001-04-25)
RFC stream Internet Engineering Task Force (IETF)
Additional resources Mailing list discussion
Stream WG state (None)
Document shepherd (None)
IESG IESG state RFC 3134 (Informational)
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)
A new Request for Comments is now available in online RFC libraries.

        RFC 3134

        Title:      Terminology for ATM ABR Benchmarking
        Author(s):  J. Dunn, C. Martin
        Status:     Informational
        Date:       June 2001
        Pages:      16
        Characters: 29542
        Updates/Obsoletes/SeeAlso:    None

        I-D Tag:    draft-ietf-bmwg-atm-term-abr-03.txt


This memo discusses and defines terms associated with performance
benchmarking tests and the results of these tests in the context of
Asynchronous Transfer Mode (ATM) based switching devices supporting
ABR (Available Bit Rate).  The terms defined in this memo will be used
in addition to terms defined in RFCs 1242, 2285, and 2544 and 2761.
This memo is a product of the Benchmarking Methodology Working Group
(BMWG) of the Internet Engineering Task Force (IETF).

This document is a product of the Benchmarking Methodology Working
Group of the IETF.

This memo provides information for the Internet community.  It does
not specify an Internet standard of any kind.  Distribution of this
memo is unlimited.

This announcement is sent to the IETF list and the RFC-DIST list.
Requests to be added to or deleted from the IETF distribution list
should be sent to IETF-REQUEST@IETF.ORG.  Requests to be
added to or deleted from the RFC-DIST distribution list should

Details on obtaining RFCs via FTP or EMAIL may be obtained by sending
an EMAIL message to rfc-info@RFC-EDITOR.ORG with the message body 
help: ways_to_get_rfcs.  For example:

        To: rfc-info@RFC-EDITOR.ORG
        Subject: getting rfcs

        help: ways_to_get_rfcs

Requests for special distribution should be addressed to either the
author of the RFC in question, or to RFC-Manager@RFC-EDITOR.ORG.  Unless
specifically noted otherwise on the RFC itself, all RFCs are for
unlimited distribution.echo 
Submissions for Requests for Comments should be sent to
RFC-EDITOR@RFC-EDITOR.ORG.  Please consult RFC 2223, Instructions to RFC
Authors, for further information.