Terminology for Benchmarking IPsec Devices
draft-ietf-bmwg-ipsec-term-12
| Document | Type |
Expired Internet-Draft
(bmwg WG)
Expired & archived
|
|
|---|---|---|---|
| Authors | Merike Kaeo , Tim Van Herck , Michele Bustos | ||
| Last updated | 2024-12-18 (Latest revision 2009-07-28) | ||
| RFC stream | Internet Engineering Task Force (IETF) | ||
| Intended RFC status | Informational | ||
| Formats | |||
| Additional resources | Mailing list discussion | ||
| Stream | WG state | WG Document | |
| Document shepherd | (None) | ||
| IESG | IESG state | Expired | |
| Consensus boilerplate | Unknown | ||
| Telechat date | (None) | ||
| Responsible AD | Ron Bonica | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This purpose of this document is to define terminology specific to measuring the performance of IPsec devices. It builds upon the tenets set forth in [RFC1242], [RFC2544], [RFC2285] and other IETF Benchmarking Methodology Working Group (BMWG) documents used for benchmarking routers and switches. This document seeks to extend these efforts specific to the IPsec paradigm. The BMWG produces two major classes of documents: Benchmarking Terminology documents and Benchmarking Methodology documents. The Terminology documents present the benchmarks and other related terms. The Methodology documents define the procedures required to collect the benchmarks cited in the corresponding Terminology documents.
Authors
Merike Kaeo
Tim Van Herck
Michele Bustos
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)