Skip to main content

A YANG model to manage the optical interface parameters for an external transponder in a WDM network

Document Type Expired Internet-Draft (ccamp WG)
Expired & archived
Authors Gabriele Galimberti , Ruediger Kunze , Dharini Hiremagalur , Gert Grammel
Last updated 2023-09-14 (Latest revision 2023-03-13)
Replaces draft-dharini-ccamp-dwdm-if-param-yang
RFC stream Internet Engineering Task Force (IETF)
Additional resources Mailing list discussion
Stream WG state WG Document
Associated WG milestone
Sep 2022
Submit DWDM Interface YANG model to IESG for review
Document shepherd (None)
IESG IESG state Expired
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:


This memo defines a Yang model related to the Optical Transceiver parameters characterising coherent 100G and above interfaces. 100G and above Transceivers support coherent modulation, multiple modulation formats, multiple FEC codes including some not yet specified (or by in phase of specification by) ITU-T G.698.2 or any other ITU-T recommendation. Use cases are described in RFC7698. The Yang model defined in this memo can be used for Optical Parameters monitoring and/or configuration of the endpoints of a multi-vendor IaDI optical link. The use of this model does not guarantee interworking of transceivers over a DWDM. Optical path feasibility and interoperability has to be determined by tools and algorithms outside the scope of this document. The purpose of this model is to program interface parameters to consistently configure the mode of operation of transceivers.


Gabriele Galimberti
Ruediger Kunze
Dharini Hiremagalur
Gert Grammel

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)