SenML Data Value Content-Format Indication
draft-ietf-core-senml-data-ct-02

Document Type Active Internet-Draft (core WG)
Last updated 2020-09-10 (latest revision 2020-07-13)
Replaces draft-keranen-core-senml-data-ct
Stream IETF
Intended RFC status (None)
Formats plain text html xml pdf htmlized (tools) htmlized bibtex
Additional Resources
- Working Group Repo
- Mailing list discussion
Stream WG state WG Document
Document shepherd Jaime Jimenez
IESG IESG state I-D Exists
Consensus Boilerplate Unknown
Telechat date
Responsible AD (None)
Send notices to Jaime Jimenez <jaime@iki.fi>
Network Working Group                                         A. Keränen
Internet-Draft                                                  Ericsson
Intended status: Standards Track                              C. Bormann
Expires: 14 January 2021                          Universität Bremen TZI
                                                            13 July 2020

               SenML Data Value Content-Format Indication
                    draft-ietf-core-senml-data-ct-02

Abstract

   The Sensor Measurement Lists (SenML) media type supports multiple
   types of values, from numbers to text strings and arbitrary binary
   data values.  In order to simplify processing of the data values this
   document proposes to specify a new SenML field for indicating the
   Content-Format of the data.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on 14 January 2021.

Copyright Notice

   Copyright (c) 2020 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents (https://trustee.ietf.org/
   license-info) in effect on the date of publication of this document.
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.  Code Components
   extracted from this document must include Simplified BSD License text
   as described in Section 4.e of the Trust Legal Provisions and are
   provided without warranty as described in the Simplified BSD License.

Keränen & Bormann        Expires 14 January 2021                [Page 1]
Internet-Draft SenML Data Value Content-Format Indication      July 2020

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   3
   3.  SenML Content-Format ("ct") Field . . . . . . . . . . . . . .   3
   4.  SenML Base Content-Format ("bct") Field . . . . . . . . . . .   4
   5.  Examples  . . . . . . . . . . . . . . . . . . . . . . . . . .   4
   6.  Security Considerations . . . . . . . . . . . . . . . . . . .   4
   7.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .   5
   8.  References  . . . . . . . . . . . . . . . . . . . . . . . . .   5
     8.1.  Normative References  . . . . . . . . . . . . . . . . . .   5
     8.2.  Informative References  . . . . . . . . . . . . . . . . .   6
   Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . .   6
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .   6

1.  Introduction

   The Sensor Measurement Lists (SenML) media type [RFC8428] can be used
   to send various different kinds of data.  In the example given in
   Figure 1, a temperature value, an indication whether a lock is open,
   and a data value (with SenML field "vd") read from an NFC reader is
   sent in a single SenML pack.

   [
     {"bn":"urn:dev:ow:10e2073a01080063:","n":"temp","u":"Cel","v":7.1},
     {"n":"open","vb":false},
     {"n":"nfc-reader","vd":"aGkgCg"}
   ]

             Figure 1: SenML pack with unidentified binary data

   The receiver is expected to know how to interpret the data in the
   "vd" field based on the context, e.g., name of the data source and
   out-of-band knowledge of the application.  However, this context may
   not always be easily available to entities processing the SenML pack.
   To facilitate automatic interpretation it is useful to be able to
   indicate an Internet media type and content-coding right in the SenML
   Record.  The CoAP Content-Format (Section 12.3 in [RFC7252]) provides
   just this information; enclosing a Content-Format number (in this
   case number 60 as defined for content-type application/cbor in
   [RFC7049]) in the Record is illustrated in Figure 2.  All registered
   CoAP Content-Formats are listed in the Content-Formats subregistry of
   the CoRE Parameters registry [IANA.core-parameters].

   {"n":"nfc-reader", "vd":"gmNmb28YKg", "ct":"60"}

         Figure 2: SenML Record with binary data identified as CBOR

Keränen & Bormann        Expires 14 January 2021                [Page 2]
Internet-Draft SenML Data Value Content-Format Indication      July 2020

   In this example SenML Record the data value contains a string "foo"
   and a number 42 encoded in a CBOR [RFC7049] array.  Since the example
   above uses the JSON format of SenML, the data value containing the
   binary CBOR value is base64-encoded.  The data value after base64
   decoding is shown with CBOR diagnostic notation in Figure 3.

   82           # array(2)
      63        # text(3)
         666F6F # "foo"
      18 2A     # unsigned(42)

          Figure 3: Example Data Value in CBOR diagnostic notation

2.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   Readers should also be familiar with the terms and concepts discussed
   in [RFC8428].  Awareness of terminology issues discussed in
   [I-D.bormann-core-media-content-type-format] can also be very
   helpful.

3.  SenML Content-Format ("ct") Field

   When a SenML Record contains a Data Value field ("vd"), the Record
   MAY also include a Content-Format indication field.  The Content-
   Format indication uses label "ct" and a string value with either a
   CoAP Content-Format identifier in decimal form with no leading zeros
   except for the value "0" itself (representing an unsigned integer in
   the range of 0-65535, similar to the CoRE Link Format [RFC6690] "ct"
   attribute) or with a string containing a Content-Type and optionally
   a Content-Coding (see below).

   The CoAP Content-Format identifier provides a simple and efficient
   way to indicate the type of the data.  Since some Internet media
   types and their content coding and parameter alternatives do not have
   assigned CoAP Content-Format identifiers, using Content-Type and
   Content-Coding is also allowed.  Both methods use a string value in
   the "ct" field to keep its data type consistent across uses.  When
   the "ct" field contains only digits, it is interpreted as a CoAP
   Content-Format identifier.

Keränen & Bormann        Expires 14 January 2021                [Page 3]
Internet-Draft SenML Data Value Content-Format Indication      July 2020

   To indicate that a Content-Coding is used with a Content-Type, the
   Content-Coding value (e.g., "deflate" [RFC7230]) is appended to the
   Content Type (media type and parameters, if any), separated by a "@"
   sign.  For example: "text/plain; charset=utf-8@deflate".  If Content-
   Coding is not specified with a Content-Type (no "@" sign is present
   outside any media type parameters), the identity (i.e., no)
   transformation is used.

4.  SenML Base Content-Format ("bct") Field

   The Base Content-Format Field, label "bct", provides a default value
   for the Content-Format Field (label "ct") within its range.  The
   range of the base field includes the Record containing it, up to (but
   not including) the next Record containing a "bct" field, if any, or
   up to the end of the pack otherwise.  Resolution (Section 4.6 of
   [RFC8428]) of this base field is performed by adding its value with
   the label "ct" to all Records in this range that carry a "vd" field
   but do not already contain a Content-Format ("ct") field.

5.  Examples

   The following examples are valid values for the "ct" and "bct" fields
   (explanation/comments in parenthesis):

   *  "60" (CoAP Content-Format for "application/cbor")

   *  "0" (CoAP Content-Format for "text/plain" with parameter
      "charset=utf-8")

   *  "application/json" (JSON Content-Type - equivalent to "50" CoAP
      Content-Format identifier)

   *  "application/json@deflate" (JSON Content-Type with "deflate" as
      Content-Coding - equivalent to "11050" CoAP Content-Format
      identifier)

   *  "text/csv" (Comma-Separated Values (CSV) [RFC4180] Content-Type)

   *  "text/csv@gzip" (CSV with "gzip" as Content-Coding)

6.  Security Considerations

   The indication of a media type in the data does not exempt a
   consuming application from properly checking its inputs.  Also, the
   ability for an attacker to supply crafted SenML data that specify
   media types chosen by the attacker may expose vulnerabilities of
   handlers for these media types to the attacker.

Keränen & Bormann        Expires 14 January 2021                [Page 4]
Internet-Draft SenML Data Value Content-Format Indication      July 2020

7.  IANA Considerations

   (Note to RFC Editor: Please replace all occurrences of "RFC-AAAA"
   with the RFC number of this specification and remove this note.)

   IANA is requested to assign new labels in the "SenML Labels"
   subregistry of the SenML registry [IANA.senml] (as defined in
   [RFC8428]) for the Content-Format indication as per Table 1:

    +=====================+=======+===========+==========+===========+
    |                Name | Label | JSON Type | XML Type | Reference |
    +=====================+=======+===========+==========+===========+
    | Base Content-Format | bct   | String    | string   | RFC-AAAA  |
    +---------------------+-------+-----------+----------+-----------+
    |      Content-Format | ct    | String    | string   | RFC-AAAA  |
    +---------------------+-------+-----------+----------+-----------+

             Table 1: IANA Registration for new SenML Labels

8.  References

8.1.  Normative References

   [IANA.senml]
              IANA, "Sensor Measurement Lists (SenML)",
              <http://www.iana.org/assignments/senml>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC7049]  Bormann, C. and P. Hoffman, "Concise Binary Object
              Representation (CBOR)", RFC 7049, DOI 10.17487/RFC7049,
              October 2013, <https://www.rfc-editor.org/info/rfc7049>.

   [RFC7252]  Shelby, Z., Hartke, K., and C. Bormann, "The Constrained
              Application Protocol (CoAP)", RFC 7252,
              DOI 10.17487/RFC7252, June 2014,
              <https://www.rfc-editor.org/info/rfc7252>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

Keränen & Bormann        Expires 14 January 2021                [Page 5]
Internet-Draft SenML Data Value Content-Format Indication      July 2020

   [RFC8428]  Jennings, C., Shelby, Z., Arkko, J., Keranen, A., and C.
              Bormann, "Sensor Measurement Lists (SenML)", RFC 8428,
              DOI 10.17487/RFC8428, August 2018,
              <https://www.rfc-editor.org/info/rfc8428>.

8.2.  Informative References

   [I-D.bormann-core-media-content-type-format]
              Bormann, C., "On Media-Types, Content-Types, and related
              terminology", Work in Progress, Internet-Draft, draft-
              bormann-core-media-content-type-format-01, 8 July 2019,
              <http://www.ietf.org/internet-drafts/draft-bormann-core-
              media-content-type-format-01.txt>.

   [IANA.core-parameters]
              IANA, "Constrained RESTful Environments (CoRE)
              Parameters",
              <http://www.iana.org/assignments/core-parameters>.

   [RFC4180]  Shafranovich, Y., "Common Format and MIME Type for Comma-
              Separated Values (CSV) Files", RFC 4180,
              DOI 10.17487/RFC4180, October 2005,
              <https://www.rfc-editor.org/info/rfc4180>.

   [RFC6690]  Shelby, Z., "Constrained RESTful Environments (CoRE) Link
              Format", RFC 6690, DOI 10.17487/RFC6690, August 2012,
              <https://www.rfc-editor.org/info/rfc6690>.

   [RFC7230]  Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
              Protocol (HTTP/1.1): Message Syntax and Routing",
              RFC 7230, DOI 10.17487/RFC7230, June 2014,
              <https://www.rfc-editor.org/info/rfc7230>.

Acknowledgements

   The authors would like to thank Sergio Abreu for the discussions
   leading to the design of this extension and Isaac Rivera for reviews
   and feedback.  Klaus Hartke suggested not burdening this draft with a
   separate mandatory-to-implement version of the fields.

Authors' Addresses

   Ari Keränen
   Ericsson
   FI-02420 Jorvas
   Finland

   Email: ari.keranen@ericsson.com

Keränen & Bormann        Expires 14 January 2021                [Page 6]
Internet-Draft SenML Data Value Content-Format Indication      July 2020

   Carsten Bormann
   Universität Bremen TZI
   Postfach 330440
   D-28359 Bremen
   Germany

   Phone: +49-421-218-63921
   Email: cabo@tzi.org

Keränen & Bormann        Expires 14 January 2021                [Page 7]