SenML Features and Versions
draft-ietf-core-senml-versions-01

Network Working Group                                         C. Bormann
Internet-Draft                                   Universitaet Bremen TZI
Updates: 8428 (if approved)                             15 November 2020
Intended status: Standards Track                                        
Expires: 19 May 2021

                      SenML Features and Versions
                   draft-ietf-core-senml-versions-01

Abstract

   This short document updates RFC 8428, Sensor Measurement Lists
   (SenML), by specifying the use of independently selectable "SenML
   Features" and mapping them to SenML version numbers.

Discussion Venues

   This note is to be removed before publishing as an RFC.

   Discussion of this document takes place on the CORE Working Group
   mailing list (core@ietf.org), which is archived at
   https://mailarchive.ietf.org/arch/browse/core/
   (https://mailarchive.ietf.org/arch/browse/core/).

   Source for this draft and an issue tracker can be found at
   https://github.com/core-wg/senml-versions (https://github.com/core-
   wg/senml-versions).

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on 19 May 2021.

Bormann                    Expires 19 May 2021                  [Page 1]
Internet-Draft         SenML Features and Versions         November 2020

Copyright Notice

   Copyright (c) 2020 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents (https://trustee.ietf.org/
   license-info) in effect on the date of publication of this document.
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.  Code Components
   extracted from this document must include Simplified BSD License text
   as described in Section 4.e of the Trust Legal Provisions and are
   provided without warranty as described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Feature Codes and the Version number  . . . . . . . . . . . .   3
   3.  Features: Reserved0, Reserved1, Reserved2, Reserved3  . . . .   3
   4.  Feature: Secondary Units  . . . . . . . . . . . . . . . . . .   3
   5.  Security Considerations . . . . . . . . . . . . . . . . . . .   4
   6.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .   4
   7.  Normative References  . . . . . . . . . . . . . . . . . . . .   5
   Acknowledgements  . . . . . . . . . . . . . . . . . . . . . . . .   5
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .   5

1.  Introduction

   The Sensor Measurement Lists (SenML) specification [RFC8428] provides
   a version number that is initially set to 10, without further
   specification on the way to make use of different version numbers.

   The traditional idea of using a version number for evolving an
   interchange format presupposes a linear progression of that format.
   A more likely form of evolution of SenML is the addition of
   independently selectable "features" that can be added to the base
   version (version 10) in a fashion that these are mostly independent
   of each other.  A recipient of a SenML pack can check the features it
   implements against those required by the pack, processing the pack
   only if all required features are provided in the implementation.

   This short document specifies the use of SenML Features and maps them
   to SenML version number space, updating [RFC8428].

Bormann                    Expires 19 May 2021                  [Page 2]
Internet-Draft         SenML Features and Versions         November 2020

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   Where bit arithmetic is explained, this document uses the notation
   familiar from the programming language C [C], except that superscript
   notation (example for two to the power of 64: 2^(64)) denotes
   exponentiation; in the plain text version of this draft, superscript
   notation is rendered by C-incompatible surrogate notation as seen in
   this example.

2.  Feature Codes and the Version number

   The present specification defines "SenML Features", each identified
   by a "feature name" (a text string) and a "feature code", an unsigned
   integer less than 53.

   The specific version of a SenML pack is composed of a set of
   features.  The SenML version number ("bver" field) is then a bitmap
   of these features, specifically the sum of, for each feature present,
   two taken to the power of the feature code of that feature.

               \~~   52                   fc
   version  =   >          present(fc) x 2
               /__ fc=0

   where present(fc) is 1 if the feature with the feature code "fc" is
   present, 0 otherwise.

3.  Features: Reserved0, Reserved1, Reserved2, Reserved3

   For SenML Version 10 as described in [RFC8428], the feature codes 0
   to 3 are already in use.  Reserved1 (1) and Reserved3 (3) are always
   present and the features Reserved0 (0) and Reserved2 (2) are always
   absent, yielding a version number of 10 if no other feature is in
   use.  These four reserved feature codes are not to be used with any
   more specific semantics except in a specification that updates the
   present specification.

4.  Feature: Secondary Units

   The feature "Secondary Units" (code number 4) indicates that
   secondary unit names [RFC8798] MAY be be used in the "u" field of
   SenML Records, in addition to the primary unit names already allowed
   by [RFC8428].

Bormann                    Expires 19 May 2021                  [Page 3]
Internet-Draft         SenML Features and Versions         November 2020

   Note that the most basic use of this feature simply sets the SenML
   version number to 26 (10 + 2^(4)).

5.  Security Considerations

   The security considerations of [RFC8428] apply.  This specification
   provides structure to the interpretation of the SenML version number,
   which poses no additional security considerations except for some
   potential for surprise that version numbers do not simply increase
   linearly.

6.  IANA Considerations

   IANA is requested to create a new subregistry "SenML features" within
   the SenML registry [IANA.senml], with the registration policy
   "specification required" [RFC8126] and the columns:

   *  Feature code (an unsigned integer less than 53)

   *  Feature name (text)

   *  Specification

   The initial content of this registry is as follows:

            +==============+=================+===============+
            | Feature code | Feature name    | Specification |
            +==============+=================+===============+
            | 0            | Reserved0       | RFCthis       |
            +--------------+-----------------+---------------+
            | 1            | Reserved1       | RFCthis       |
            +--------------+-----------------+---------------+
            | 2            | Reserved2       | RFCthis       |
            +--------------+-----------------+---------------+
            | 3            | Reserved3       | RFCthis       |
            +--------------+-----------------+---------------+
            | 4            | Secondary Units | RFCthis       |
            +--------------+-----------------+---------------+

                Table 1: Features defined for SenML at the
                             time of writing

Bormann                    Expires 19 May 2021                  [Page 4]
Internet-Draft         SenML Features and Versions         November 2020

   As the number of features that can be registered has a hard limit (48
   codes left at the time of writing), the designated expert is
   specifically instructed to maintain a frugal regime of code point
   allocation, keeping code points available for SenML Features that are
   likely to be useful for non-trivial subsets of the SenML ecosystem.
   Quantitatively, the expert could for instance steer the allocation to
   not allocate more than 10 % of the remaining set per year.

7.  Normative References

   [C]        International Organization for Standardization,
              "Information technology — Programming languages — C", ISO/
              IEC 9899:2018, Fourth Edition, June 2018.

   [IANA.senml]
              IANA, "Sensor Measurement Lists (SenML)",
              <http://www.iana.org/assignments/senml>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC8126]  Cotton, M., Leiba, B., and T. Narten, "Guidelines for
              Writing an IANA Considerations Section in RFCs", BCP 26,
              RFC 8126, DOI 10.17487/RFC8126, June 2017,
              <https://www.rfc-editor.org/info/rfc8126>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC8428]  Jennings, C., Shelby, Z., Arkko, J., Keranen, A., and C.
              Bormann, "Sensor Measurement Lists (SenML)", RFC 8428,
              DOI 10.17487/RFC8428, August 2018,
              <https://www.rfc-editor.org/info/rfc8428>.

   [RFC8798]  Bormann, C., "Additional Units for Sensor Measurement
              Lists (SenML)", RFC 8798, DOI 10.17487/RFC8798, June 2020,
              <https://www.rfc-editor.org/info/rfc8798>.

Acknowledgements

   Ari Keranen proposed to use the version number as a bitmap and
   provided further input on this specification.

Author's Address

Bormann                    Expires 19 May 2021                  [Page 5]
Internet-Draft         SenML Features and Versions         November 2020

   Carsten Bormann
   Universitaet Bremen TZI
   Postfach 330440
   D-28359 Bremen
   Germany

   Phone: +49-421-218-63921
   Email: cabo@tzi.org

Bormann                    Expires 19 May 2021                  [Page 6]