Extended Tokens and Stateless Clients in the Constrained Application Protocol (CoAP)
draft-ietf-core-stateless-04
The information below is for an old version of the document.
| Document | Type | Active Internet-Draft (core WG) | |
|---|---|---|---|
| Author | Klaus Hartke | ||
| Last updated | 2020-03-12 (Latest revision 2019-12-06) | ||
| Replaces | draft-hartke-core-stateless | ||
| Stream | Internet Engineering Task Force (IETF) | ||
| Formats | plain text xml htmlized pdfized bibtex | ||
| Reviews |
SECDIR Telechat review
(of
-06)
Has Nits
GENART Last Call review
(of
-05)
Ready with Issues
SECDIR Last Call review
(of
-05)
Has Issues
OPSDIR Last Call Review
Incomplete, due 2020-04-02
|
||
| Stream | WG state | Submitted to IESG for Publication | |
| Document shepherd | Carsten Bormann | ||
| Shepherd write-up | Show Last changed 2020-03-05 | ||
| IESG | IESG state | Last Call Requested | |
| Consensus boilerplate | Yes | ||
| Telechat date | (None) | ||
| Responsible AD | Barry Leiba | ||
| Send notices to | Carsten Bormann <cabo@tzi.org> |
draft-ietf-core-stateless-04
CoRE Working Group K. Hartke
Internet-Draft Ericsson
Updates: 7252, 8323 (if approved) December 6, 2019
Intended status: Standards Track
Expires: June 8, 2020
Extended Tokens and Stateless Clients
in the Constrained Application Protocol (CoAP)
draft-ietf-core-stateless-04
Abstract
This document provides considerations for alleviating CoAP clients
and intermediaries of keeping per-request state. To facilitate this,
this document additionally introduces a new, optional CoAP protocol
extension for extended token lengths.
This document updates RFCs 7252 and 8323.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on June 8, 2020.
Copyright Notice
Copyright (c) 2019 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction
1.1. Terminology
2. Extended Tokens
2.1. Extended Token Length (TKL) Field
2.2. Discovering Support
2.2.1. Extended-Token-Length Capability Option
2.2.2. Trial-and-Error
2.3. Intermediaries
3. Stateless Clients
3.1. Serializing Client State
3.2. Using Extended Tokens
3.3. Transmitting Messages
4. Stateless Intermediaries
4.1. Observing Resources
4.2. Block-Wise Transfers
4.3. Gateway Timeouts
5. Security Considerations
5.1. Extended Tokens
5.2. Stateless Clients and Intermediaries
6. IANA Considerations
6.1. CoAP Signaling Option Number
7. References
7.1. Normative References
7.2. Informative References
Appendix A. Updated Message Formats
A.1. CoAP over UDP
A.2. CoAP over TCP
A.3. CoAP over WebSockets
Acknowledgements
Author's Address
1. Introduction
The Constrained Application Protocol (CoAP) [RFC7252] is a RESTful
application-layer protocol for constrained environments [RFC7228].
In CoAP, clients (or intermediaries in the client role) make requests
to servers (or intermediaries in the server role), which satisfy the
requests by returning responses.
While a request is ongoing, a client typically needs to keep some
state that it requires for processing the response when that arrives.
Identification of this state is done in CoAP by means of a token, an
opaque sequence of bytes chosen by the client and included in the
CoAP request, and that is returned by the server verbatim in any
resulting CoAP response (Figure 1).
+-----------------+ request with +------------+
| | | state identifier | |
| | | as token | |
| .-<-+->------|--------------------->|------. |
| _|_ | | | |
| / \ stored | | | |
| \___/ state | | | |
| | | | | |
| '->-+-<------|<---------------------|------' |
| | | response with | |
| v | token echoed back | |
+-----------------+ +------------+
Client Server
Figure 1: Token as an Identifier for Request State
In some scenarios, it can be beneficial to reduce the amount of state
that is stored at the client at the cost of increased message sizes.
A client can opt into this by serializing (parts of) its state into
the token itself and then recovering this state from the token in the
response (Figure 2).
+-----------------+ request with +------------+
| | | serialized state | |
| | | as token | |
| +--------|=====================>|------. |
| | | | |
| look ma, | | | |
| no state! | | | |
| | | | |
| +--------|<=====================|------' |
| | | response with | |
| v | token echoed back | |
+-----------------+ +------------+
Client Server
Figure 2: Token as Serialization of Request State
Section 3 of this document provides considerations for clients
becoming "stateless" in this way. (As those considerations will
show, the term "stateless" is not entirely accurate. The clients
still need to maintain per-server state and other kinds of state. So
it would be more accurate to say that these clients are just avoiding
per-request state.)
Section 4 of this document extends the considerations to
intermediaries, which may want to avoid not only state for the
requests they send but also for the requests they receive.
Serializing state into tokens is limited by the fact that both CoAP
over UDP [RFC7252] and CoAP over reliable transports [RFC8323]
restrict the maximum token length to 8 bytes. To overcome this
limitation, Section 2 of this document first introduces a CoAP
protocol extension for extended token lengths.
While the use case (avoiding per-request state) and the mechanism
(extended token lengths) presented in this document are closely
related, both can be used independently of each other: Some
implementations may be able to fit their state in just 8 bytes; some
implementations may have other use cases for extended token lengths.
1.1. Terminology
In this document, the term "stateless" refers to an implementation
strategy for a client (or intermediary in the client role) that does
not require it to keep state for the individual requests it sends to
a server (or intermediary in the server role). The client still
needs to keep state for each server it communicates with (e.g., for
token generation, message retransmission, and congestion control).
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
2. Extended Tokens
This document updates the message formats defined for CoAP over UDP
[RFC7252] and CoAP over TCP, TLS, and WebSockets [RFC8323] with a new
definition of the TKL field.
2.1. Extended Token Length (TKL) Field
The definition of the TKL field is updated as follows:
Token Length (TKL): 4-bit unsigned integer. A value between 0 and
12 inclusive indicates the length of the variable-length Token
field in bytes. The other three values are reserved for special
constructs:
13: An 8-bit unsigned integer precedes the Token field and
indicates the length of the Token field minus 13.
14: A 16-bit unsigned integer in network byte order precedes the
Token field and indicates the length of the Token field minus
269.
15: Reserved. This value MUST NOT be sent and MUST be processed
as a message format error.
The updated message formats are illustrated in Appendix A.
All other fields retain their definition.
The new definition of the TKL field increases the maximum token
length that can be represented in a message to 65804 bytes. However,
the maximum token length that sender and recipient implementations
support may be shorter. For example, a constrained node of Class 1
[RFC7228] might support extended token lengths only up to 32 bytes.
2.2. Discovering Support
Extended token lengths require support from server implementations.
Support can be discovered by a client implementation in one of two
ways:
o Where Capabilities and Settings Messages (CSMs) are available,
such as in CoAP over TCP, support can be discovered using the
Extended-Token-Length Capability Option defined in Section 2.2.1.
o Otherwise, such as in CoAP over UDP, support can only be
discovered by trial-and-error, as described in Section 2.2.2.
2.2.1. Extended-Token-Length Capability Option
A server can use the elective Extended-Token-Length Capability Option
to indicate the maximum token length it can accept in requests.
+----+---+---+--------+--------------------+-------+--------+-------+
| # | C | R | Applie | Name | Forma | Length | Base |
| | | | s to | | t | | Value |
+----+---+---+--------+--------------------+-------+--------+-------+
| TB | | | CSM | Extended-Token- | uint | 0-3 | 8 |
| D | | | | Length | | | |
+----+---+---+--------+--------------------+-------+--------+-------+
C=Critical, R=Repeatable
Table 1: The Extended-Token-Length Capability Option
As per Section 3 of RFC 7252, the base value (and the value used when
this option is not implemented) is 8.
The active value of the Extended-Token-Length Option is replaced each
time the option is sent with a modified value. Its starting value is
its base value.
The option value MUST NOT be less than 8 or greater than 65804. If
an option value less than 8 is received, the option MUST be ignored.
If an option value greater than 65804 is received, the option value
MUST be set to 65804.
Any option value greater than 8 implies support for the new
definition of the TKL field specified in Section 2.1. Indication of
support by a server does not oblige a client to actually make use of
token lengths greater than 8.
If a server receives a request with a token of a length greater than
it indicated in its Extended-Token-Length Option, it MUST handle the
request as a message format error.
The Extended-Token-Length Capability Option does not apply to
responses. The sender of a request is simply expected not to use a
token of a length greater than it is willing to accept in a response.
2.2.2. Trial-and-Error
A server implementation that does not support the updated definition
of the TKL field specified in Section 2.1 will consider a request
with a TKL field value outside the range 0 to 8 a message format
error and reject it (Section 3 of RFC 7252). A client can therefore
determine support by sending a request with an extended token length
and checking whether it is rejected by the server or not.
In CoAP over UDP, the way a request message is rejected depends on
the message type. A Confirmable message with a message format error
is rejected with a Reset message (Section 4.2 of RFC 7252). A Non-
confirmable message with a message format error is either rejected
with a Reset message or just silently ignored (Section 4.3 of RFC
7252). It is therefore RECOMMENDED that clients use a Confirmable
message for determining support.
As per RFC 7252, Reset messages are empty and do not contain a token;
they only return the Message ID (Figure 3). They also do not contain
any indication of what caused a message format error. To avoid any
ambiguity, it is therefore RECOMMENDED that clients use a request
that has no potential message format error other than the extended
token length.
+-----------------+ request message +------------+
| | | with extended | |
| | | token length | |
| .-<-+->------|--------------------->|------. |
| _|_ | | | |
| / \ stored | | | |
| \___/ state | | | |
| | | | | |
| '->-+-<------|<---------------------|------' |
| | | reset message | |
| v | with only message | |
+-----------------+ ID echoed back +------------+
Client Server
Figure 3: A Confirmable Request With an Extended Token is Rejected
With a Reset Message if the Server Does Not Have Support
An example of a suitable request is a GET request in a Confirmable
message that includes only an If-None-Match option and a token of the
greatest length that the client intends to use. Any response with
the same token echoed back indicates that tokens up to that length
are supported by the server.
Since network addresses may change, a client SHOULD NOT assume that
extended token lengths are supported by a server later than 60
minutes after receiving a response with an extended token length.
If a server supports extended token lengths but receives a request
with a token of a length it is unwilling or unable to handle, it MUST
NOT reject the message, as that would imply that extended token
lengths are not supported at all. Instead, if the server cannot
handle the request at the time, it SHOULD return a 5.03 (Service
Unavailable) response; if the server will never be able to handle
(e.g., because the token is too large), it SHOULD return a 4.00 (Bad
Request) response.
Design Note: The requirement to return an error response when a
token cannot be handled might seem somewhat contradictory, as
returning the error response requires the server also to return
the token it cannot handle. However, processing a request usually
involves a number of steps from receiving the message to passing
it to application logic. The idea is that a server implementing
this document should at least support large tokens in its first
few processing steps, enough to return an error response rather
than a Reset message.
Design Note: To make the trial-and-error based discovery not too
complicated, no effort is made to indicate the maximum supported
token length. A client implementation would probably already
choose the shortest token possible for the task (like being
stateless as described in Section 3), so it probably would not be
able to reduce the length any further anyway should a server
indicate a lower limit.
2.3. Intermediaries
Tokens are a hop-by-hop feature: If there are one or more
intermediaries between a client and a server, every token is scoped
to the exchange between a node in the client role and the node in the
server role that it is immediately interacting with.
When an intermediary receives a request, the only requirement is that
it echoes the token back in any resulting response. There is no
requirement or expectation that an intermediary passes a client's
token on to a server or that an intermediary uses extended token
lengths itself in its request to satisfy a request with an extended
token length. Discovery needs to be performed for each hop where
extended token lengths are to be used.
3. Stateless Clients
A client can be alleviated of keeping per-request state by
serializing the state into a sequence of bytes and then sending those
bytes as the token of the request. The server returns the token
verbatim in the response to the client, which allows the client to
recover the state and process the response as if it had kept the
state locally.
The format of the serialized state is generally an implementation
detail of the client and opaque to the server. However, transporting
client state in requests and responses has significant security and
privacy implications that need to be taken into consideration by a
client implementation. There are also several other, non-obvious
implications from CoAP protocol features that should be taken into
consideration by a client implementation.
The following subsections discuss some of these considerations.
3.1. Serializing Client State
Serialized state information is an attractive target for both
unwanted nodes (e.g., on-path attackers) and wanted nodes (e.g.,
forward proxies) on the path. Therefore, a client SHOULD integrity
protect the state information, unless processing a response does not
modify state or cause any other significant side effects.
Even when the serialized state is integrity protected, an attacker
may still replay a response, making the client believe it sent the
same request twice. Therefore, the client SHOULD implement replay
protection (e.g., by using sequence numbers and a replay window),
unless processing a response does not modify state or cause other any
significant side effects. Integrity protection is REQUIRED for
replay protection.
If processing a response without keeping request state is sensitive
to the time elapsed since sending the request, then the serialized
state SHOULD include freshness information (e.g., a timestamp).
Information in the serialized state may be privacy sensitive. A
client SHOULD encrypt the serialized state if it contains privacy
sensitive information that an attacker would not get otherwise.
3.2. Using Extended Tokens
A client that depends on support for extended token lengths
(Section 2) from the server to avoid keeping request state SHOULD
perform a discovery of support (Section 2.2) before it can be
stateless.
This discovery MUST be performed in a stateful way, i.e., keeping
state for the request (Figure 4): If the client was stateless from
the start and the server does not support extended tokens, then any
error message could not be processed since the state would neither be
present at the client nor returned in the Reset message (Figure 5).
+-----------------+ dummy request +------------+
| | | with extended | |
| | | token | |
| .-<-+->------|=====================>|------. |
| _|_ | | | |
| / \ stored | | | |
| \___/ state | | | |
| | | | | |
| '->-+-<------|<=====================|------' |
| | | response with | |
| | | extended token | |
| | | echoed back | |
| | | | |
| | | | |
| | | request with | |
| | | serialized state | |
| | | as token | |
| +--------|=====================>|------. |
| | | | |
| look ma, | | | |
| no state! | | | |
| | | | |
| +--------|<=====================|------' |
| | | response with | |
| v | token echoed back | |
+-----------------+ +------------+
Client Server
Figure 4: Depending on Extended Tokens for Being Stateless First
Requires a Successful Stateful Discovery of Support
+-----------------+ dummy request +------------+
| | | with extended | |
| | | token | |
| +--------|=====================>|------. |
| | | | |
| | | | |
| | | | |
| | | | |
| ???|<---------------------|------' |
| | reset message | |
| | with only message | |
+-----------------+ ID echoed back +------------+
Client Server
Figure 5: Stateless Discovery of Support Does Not Work
In environments where support can be reliably discovered through some
other means, the discovery of support is OPTIONAL. An example for
this is the Constrained Join Protocol (CoJP) in a 6TiSCH network
[I-D.ietf-6tisch-minimal-security], where support for extended tokens
is required from all relevant parties.
3.3. Transmitting Messages
In CoAP over UDP [RFC7252], a client has the choice between
Confirmable and Non-confirmable messages for requests. When using
Non-confirmable messages, a client does not have to keep any message
exchange state, which can help in the goal of avoiding state. When
using Confirmable messages, a client needs to keep message exchange
state for performing retransmissions and handling Acknowledgement and
Reset messages, however. Non-confirmable messages are therefore
better suited. In any case, a client still needs to keep congestion
control state, i.e., maintain state for each node it communicates
with and enforce limits like NSTART.
As per Section 5.2 of RFC 7252, a client must be prepared to receive
a response as a piggybacked response, a separate response or Non-
confirmable response, regardless of the message type used for the
request. A stateless client MUST handle these response types as
follows:
o If a piggybacked response passes the token integrity protection
and freshness checks, the client processes the message as
specified in RFC 7252; otherwise, it silently discards the
message.
o If a separate response passes the token integrity protection and
freshness checks, the client processes the message as specified in
RFC 7252; otherwise, it rejects the message as specified in
Section 4.2 of RFC 7252.
o If a Non-confirmable response passes the token integrity
protection and freshness checks, the client processes the message
as specified in RFC 7252; otherwise, it rejects the message as
specified in Section 4.3 of RFC 7252.
4. Stateless Intermediaries
Tokens are a hop-by-hop feature: If a client makes a request to an
intermediary, that intermediary needs to store the client's token
(along with the client's transport address) while it makes its own
request towards the origin server and waits for the response. When
the intermediary receives the response, it looks up the client's
token and transport address for the received request and sends an
appropriate response to the client.
An intermediary might want to be "stateless" not only in its role as
a client but also in its role as a server, i.e., be alleviated of
storing the client information for the requests it receives.
Such an intermediary can be implemented by serializing the client
information along the request state into the token towards the origin
server. When the intermediary receives the response, it can recover
the client information from the token and use it to satisfy the
client's request and therefore doesn't need to store it itself.
The following subsections discuss some considerations for this
approach.
4.1. Observing Resources
One drawback of the approach is that an intermediary, without keeping
request state, is unable to aggregate multiple requests for the same
target resource, which can significantly reduce efficiency. In
particular, when clients observe [RFC7641] the same resource,
aggregating requests is REQUIRED (Section 3.1 of RFC 7641). This
requirement cannot be satisfied without keeping request state.
Furthermore, an intermediary that does not keep track of the clients
observing a resource is not able to determine whether these clients
are still interested in receiving further notifications (Section 3.5
of RFC 7641) or want to cancel an observation (Section 3.6 of RFC
7641).
Therefore, an intermediary MUST NOT include an Observe Option in
requests it sends without keeping both the request state for the
requests it sends and the client information for the requests it
receives.
4.2. Block-Wise Transfers
When using block-wise transfers [RFC7959], a server might not be able
to distinguish blocks originating from different clients once they
have been forwarded by an intermediary. Intermediaries need to
ensure that this does not lead to inconsistent resource state by
keeping distinct block-wise request operations on the same resource
apart, e.g., utilizing the Request-Tag Option
[I-D.ietf-core-echo-request-tag].
4.3. Gateway Timeouts
As per Section 5.7.1 of RFC 7252, an intermediary is REQUIRED to
return a 5.04 (Gateway Timeout) response if it cannot obtain a
response within a timeout. However, if an intermediary does not keep
the client information for the requests it receives, it cannot return
such a response. Therefore, in this case, the timeout should be set
to infinite.
5. Security Considerations
5.1. Extended Tokens
Tokens significantly larger than the 8 bytes specified in RFC 7252
have implications in particular for nodes with constrained memory
size that need to be mitigated. A node in the server role supporting
extended token lengths may be vulnerable to a denial-of-service when
an attacker (either on-path or a malicious client) sends large tokens
to fill up the memory of the node. Implementations need to be
prepared to handle such messages.
5.2. Stateless Clients and Intermediaries
Transporting the state needed by a client to process a response as
serialized state information in the token has several significant and
non-obvious security and privacy implications that need to be
mitigated; see Section 3.1 for recommendations.
The use of encryption, integrity protection, and replay protection of
serialized state is recommended in general, unless a careful analysis
of any potential attacks to security and privacy is performed. AES-
CCM with a 64 bit tag is recommended, combined with a sequence number
and a replay window. Where encryption is not needed, HMAC-SHA-256,
combined with a sequence number and a replay window, may be used.
When using an encryption mode that depends on a nonce, such as AES-
CCM, repeated use of the same nonce under the same key causes the
cipher to fail catastrophically. If a nonce is ever used for more
than one encryption operation with the same key, then the same key
stream gets used to encrypt both plaintexts and the confidentiality
guarantees are voided. Devices with low-entropy sources -- as is
typical with constrained devices, which incidentally happen to be a
natural candidate for the stateless mechanism described in this
document -- need to carefully pick a nonce generation mechanism that
provides the above uniqueness guarantee. Additionally, since it can
be difficult to use AES-CCM securely when using statically configured
keys, implementations should use automated key management [RFC4107].
6. IANA Considerations
6.1. CoAP Signaling Option Number
The following entries are added to the "CoAP Signaling Option
Numbers" registry within the "CoRE Parameters" registry.
+------------+--------+-----------------------+-------------------+
| Applies to | Number | Name | Reference |
+------------+--------+-----------------------+-------------------+
| 7.01 | TBD | Extended-Token-Length | [[this document]] |
+------------+--------+-----------------------+-------------------+
[[NOTE TO RFC EDITOR: Please replace "TBD" in this section and in
Table 1 with the code point assigned by IANA.]]
7. References
7.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC4107] Bellovin, S. and R. Housley, "Guidelines for Cryptographic
Key Management", BCP 107, RFC 4107, DOI 10.17487/RFC4107,
June 2005, <https://www.rfc-editor.org/info/rfc4107>.
[RFC7252] Shelby, Z., Hartke, K., and C. Bormann, "The Constrained
Application Protocol (CoAP)", RFC 7252,
DOI 10.17487/RFC7252, June 2014,
<https://www.rfc-editor.org/info/rfc7252>.
[RFC7641] Hartke, K., "Observing Resources in the Constrained
Application Protocol (CoAP)", RFC 7641,
DOI 10.17487/RFC7641, September 2015,
<https://www.rfc-editor.org/info/rfc7641>.
[RFC7959] Bormann, C. and Z. Shelby, Ed., "Block-Wise Transfers in
the Constrained Application Protocol (CoAP)", RFC 7959,
DOI 10.17487/RFC7959, August 2016,
<https://www.rfc-editor.org/info/rfc7959>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8323] Bormann, C., Lemay, S., Tschofenig, H., Hartke, K.,
Silverajan, B., and B. Raymor, Ed., "CoAP (Constrained
Application Protocol) over TCP, TLS, and WebSockets",
RFC 8323, DOI 10.17487/RFC8323, February 2018,
<https://www.rfc-editor.org/info/rfc8323>.
7.2. Informative References
[I-D.ietf-6tisch-minimal-security]
Vucinic, M., Simon, J., Pister, K., and M. Richardson,
"Minimal Security Framework for 6TiSCH", draft-ietf-
6tisch-minimal-security-13 (work in progress), October
2019.
[I-D.ietf-core-echo-request-tag]
Amsuess, C., Mattsson, J., and G. Selander, "CoAP: Echo,
Request-Tag, and Token Processing", draft-ietf-core-echo-
request-tag-08 (work in progress), November 2019.
[RFC7228] Bormann, C., Ersue, M., and A. Keranen, "Terminology for
Constrained-Node Networks", RFC 7228,
DOI 10.17487/RFC7228, May 2014,
<https://www.rfc-editor.org/info/rfc7228>.
Appendix A. Updated Message Formats
This appendix illustrates the CoAP message formats updated with the
new definition of the TKL field (Section 2).
A.1. CoAP over UDP
0 1 2 3 4 5 6 7
+-------+-------+---------------+
| | | |
| Ver | T | TKL | 1 byte
| | | |
+-------+-------+---------------+
| |
| Code | 1 byte
| |
+-------------------------------+
| |
| |
| |
+- Message ID -+ 2 bytes
| |
| |
| |
+-------------------------------+
\ \
/ TKL / 0-2 bytes
\ (extended) \
+-------------------------------+
\ \
/ Token / 0 or more bytes
\ \
+-------------------------------+
\ \
/ /
\ \
/ Options / 0 or more bytes
\ \
/ /
\ \
+---------------+---------------+
| | |
| 15 | 15 | 1 byte (if payload)
| | |
+---------------+---------------+
\ \
/ /
\ \
/ Payload / 0 or more bytes
\ \
/ /
\ \
+-------------------------------+
A.2. CoAP over TCP
0 1 2 3 4 5 6 7
+---------------+---------------+
| | |
| Len | TKL | 1 byte
| | |
+---------------+---------------+
\ \
/ Len / 0-2 bytes
\ (extended) \
+-------------------------------+
| |
| Code | 1 byte
| |
+-------------------------------+
\ \
/ TKL / 0-2 bytes
\ (extended) \
+-------------------------------+
\ \
/ Token / 0 or more bytes
\ \
+-------------------------------+
\ \
/ /
\ \
/ Options / 0 or more bytes
\ \
/ /
\ \
+---------------+---------------+
| | |
| 15 | 15 | 1 byte (if payload)
| | |
+---------------+---------------+
\ \
/ /
\ \
/ Payload / 0 or more bytes
\ \
/ /
\ \
+-------------------------------+
A.3. CoAP over WebSockets
0 1 2 3 4 5 6 7
+---------------+---------------+
| | |
| 0 | TKL | 1 byte
| | |
+---------------+---------------+
| |
| Code | 1 byte
| |
+-------------------------------+
\ \
/ TKL / 0-2 bytes
\ (extended) \
+-------------------------------+
\ \
/ Token / 0 or more bytes
\ \
+-------------------------------+
\ \
/ /
\ \
/ Options / 0 or more bytes
\ \
/ /
\ \
+---------------+---------------+
| | |
| 15 | 15 | 1 byte (if payload)
| | |
+---------------+---------------+
\ \
/ /
\ \
/ Payload / 0 or more bytes
\ \
/ /
\ \
+-------------------------------+
Acknowledgements
This document is based on the requirements of and work on the Minimal
Security Framework for 6TiSCH [I-D.ietf-6tisch-minimal-security] by
Malisa Vucinic, Jonathan Simon, Kris Pister, and Michael Richardson.
Thanks to Christian Amsuess, Carsten Bormann, Christer Holmberg, Ari
Keranen, John Mattsson, Jim Schaad, Goeran Selander, and Malisa
Vucinic for helpful comments and discussions that have shaped the
document.
Special thanks to Thomas Fossati for his in-depth review, copious
comments, and suggested text.
Author's Address
Klaus Hartke
Ericsson
Torshamnsgatan 23
Stockholm SE-16483
Sweden
Email: klaus.hartke@ericsson.com