Technical Summary
This document specifies the DOTS data channel, one of two protocols
(the other being the DOTS signal channel --
draft-ietf-dots-signal-channel) that enables the exchange of
information necessary to mitigate a DDoS attack. This data channel
protocol allows the exchange of information that is not appropriate
to send under attack conditions.
This is a companion document to the DOTS signal channel
specification.
Working Group Summary
This document received substantial feedback from a WGLC initiated on
the -18, leading up to the publication of several revisions through
-21. The shpeherd review produced further feedback for the -22 and
the WG has been active in following subsequent updates stemming from
AD review, directorate reviews, and last-call reviews.
Document Quality
There have been three implementations of the draft, one open source
and two proprietary from the following vendors:
** go-dots (NTT) -- https://github.com/nttdots/go-dots
** NCC Group
** Huawei
Older versions of the draft were used in interops at the Hackathons
of IETF 100 and 101 to enable end-to-end testing for DOTS agents. At
the IETF 102 Hackathon, there was an inter-op specifically focused on
testing between these three implementations per the -16 of the draft.
Identified issues were fixed in draft versions -17 and -18.
There was early coordination with the NETCONF WG for the usage of ACL
YANG modules.
Personnel
The document shepherd is Roman Danyliw. The responsible Area Director
is Benjamin Kaduk.
RFC Editor Note
RFC Editor Note
In Section 3.4, in the text:
o Otherwise, the DOTS agent MUST update or insert the "Via" header
by appending its own information.
please replace "header" with "header field".