IMAP4 Extension: Message Preview Generation
draft-ietf-extra-imap-fetch-preview-00
The information below is for an old version of the document.
| Document | Type | Active Internet-Draft (extra WG) | |
|---|---|---|---|
| Author | Michael Slusarz | ||
| Last updated | 2019-01-14 (Latest revision 2018-11-06) | ||
| Replaces | draft-ietf-extra-imap-fetch-snippet | ||
| Stream | Internet Engineering Task Force (IETF) | ||
| Formats | plain text xml htmlized pdfized bibtex | ||
| Reviews |
GENART Last Call review
(of
-09)
Ready with Nits
GENART Telechat review
(of
-03)
Ready with Issues
SECDIR Last Call review
(of
-03)
Has Issues
|
||
| Stream | WG state | Submitted to IESG for Publication | |
| Document shepherd | Bron Gondwana | ||
| Shepherd write-up | Show Last changed 2019-01-03 | ||
| IESG | IESG state | AD Evaluation::Revised I-D Needed | |
| Consensus boilerplate | Yes | ||
| Telechat date | (None) | ||
| Responsible AD | Alexey Melnikov | ||
| Send notices to | Bron Gondwana <brong@fastmailteam.com> |
draft-ietf-extra-imap-fetch-preview-00
EXTRA M. Slusarz
Internet-Draft Open-Xchange Inc.
Intended status: Standards Track November 5, 2018
Expires: May 9, 2019
IMAP4 Extension: Message Preview Generation
draft-ietf-extra-imap-fetch-preview-00
Abstract
This document specifies an IMAP protocol extension which allows a
client to request that a server provide an abbreviated representation
of a message that can be used by a client to provide a useful
contextual preview of the message contents.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on May 9, 2019.
Copyright Notice
Copyright (c) 2018 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Slusarz Expires May 9, 2019 [Page 1]
Internet-Draft IMAP: PREVIEW Extension November 2018
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
2. Conventions Used In This Document . . . . . . . . . . . . . . 3
3. FETCH Data Item . . . . . . . . . . . . . . . . . . . . . . . 4
3.1. Command . . . . . . . . . . . . . . . . . . . . . . . . . 4
3.2. Response . . . . . . . . . . . . . . . . . . . . . . . . 4
4. PREVIEW Algorithms . . . . . . . . . . . . . . . . . . . . . 5
4.1. FUZZY . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5. PREVIEW Priority Modifiers . . . . . . . . . . . . . . . . . 5
5.1. LAZY . . . . . . . . . . . . . . . . . . . . . . . . . . 5
6. Examples . . . . . . . . . . . . . . . . . . . . . . . . . . 6
7. Formal Syntax . . . . . . . . . . . . . . . . . . . . . . . . 8
8. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 9
9. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 9
10. Security Considerations . . . . . . . . . . . . . . . . . . . 9
11. References . . . . . . . . . . . . . . . . . . . . . . . . . 10
11.1. Normative References . . . . . . . . . . . . . . . . . . 10
11.2. Informative References . . . . . . . . . . . . . . . . . 10
Appendix A. Change History (To be removed by RFC Editor before
publication) . . . . . . . . . . . . . . . . . . . . 11
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 11
1. Introduction
Many modern mail clients display small extracts of the body text as
an aid to allow a user to quickly decide whether they are interested
in viewing the full message contents. Mail clients implementing the
Internet Message Access Protocol [RFC3501] would benefit from a
standardized, consistent way to generate these brief previews of
messages.
Generation of a preview on the server has several benefits. First,
it allows consistent representation of previews across all clients.
This standardized display can reduce user confusion when using
multiple clients, as abbreviated message representations in clients
will show identical message details.
Second, server-side preview generation is more efficient. A client-
based algorithm needs to issue, at a minimum, a FETCH BODYSTRUCTURE
command in order to determine which MIME [RFC2045] body part(s)
should be represented in the preview. Subsequently, at least one
FETCH BODY command may be needed to retrieve body data used in
preview generation. These FETCH commands cannot be pipelined since
the BODYSTRUCTURE query must be parsed on the client before the list
of parts to be retrieved via the BODY command(s) can be determined.
Slusarz Expires May 9, 2019 [Page 2]
Internet-Draft IMAP: PREVIEW Extension November 2018
Additionally, it may be difficult to predict the amount of body data
that must be retrieved to adequately represent the part via a
preview, therefore requiring inefficient fetching of excessive data
in order to account for this uncertainty. For example, a preview
algorithm to display data contained in a text/html [RFC2854] part
will likely strip the markup tags to obtain textual content.
However, without fetching the entire content of the part, there is no
way to guarantee that sufficient non-tag content will exist unless
either 1) the entire part is retrieved or 2) an additional partial
FETCH is executed when the client determines that it does not possess
sufficient data from a previous partial FETCH to display an adequate
representation of the preview.
Finally, server generation allows caching in a centralized location.
Using server generated previews allows them to be generated globally
once per message, and then cached indefinitely. Retrieval of message
data may be expensive within a server, for example, so a server can
be configured to reduce its storage retrieval load by pre-generating
preview data.
A server that supports the PREVIEW extension indicates this with one
or more capability names consisting of "PREVIEW=" followed by a
supported preview algorithm name. This format provides for future
upwards-compatible extensions and/or the ability to use locally-
defined preview algorithms.
2. Conventions Used In This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
"User" is used to refer to a human user, whereas "client" refers to
the software being run by the user.
In examples, "C:" and "S:" indicate lines sent by the client and
server respectively. If a single "C:" or "S:" label applies to
multiple lines, then the line breaks between those lines are for
editorial clarity only and are not part of the actual protocol
exchange.
As with all IMAP extension documents, the case used in writing IMAP
protocol elements herein is chosen for editorial clarity, and
implementations must pay attention to the numbered rules at the
beginning of [RFC3501] Section 9.
Slusarz Expires May 9, 2019 [Page 3]
Internet-Draft IMAP: PREVIEW Extension November 2018
3. FETCH Data Item
3.1. Command
To retrieve a preview for a message, the "PREVIEW" FETCH attribute is
used when issuing a FETCH command.
If no algorithm identifier is provided, the server decides which of
its built-in algorithms to use to generate the preview text.
Alternately, the client may explicitly indicate which algorithm(s)
should be used in a parenthesized list after the PREVIEW attribute
containing the name of the algorithm. These algorithms MUST be one
of the algorithms identified as supported in the PREVIEW capability
responses. If a client requests an algorithm that is unsupported,
the server MUST return a tagged BAD response.
The order of the algorithms in the parenthesized list (from left to
right) defines the client's priority decision. Duplicate algorithms
in the list SHOULD be ignored. For purposes of duplicate detection,
priority modifiers (Section 5) should be ignored. A server MUST
honor a client's algorithm priority decision.
3.2. Response
The algorithm used by the server to generate the preview is returned
preceding the preview string.
The server returns a variable-length string that is the generated
preview for that message.
A server SHOULD strive to generate the same string for a given
message for each request. However, since previews are understood to
be a representation of the message data and not a canonical view of
its contents, a client MUST NOT assume that a message preview is
immutable for a given message. This relaxed requirement permits a
server to offer previews as an option without requiring potentially
burdensome storage and/or processing requirements to guarantee
immutability for a use case that does not require this strictness.
If the preview is not available, the server MUST return NIL as the
PREVIEW response. A NIL response indicates to the client that
preview information MAY become available in a future PREVIEW FETCH
request.
Slusarz Expires May 9, 2019 [Page 4]
Internet-Draft IMAP: PREVIEW Extension November 2018
4. PREVIEW Algorithms
4.1. FUZZY
The FUZZY algorithm directs the server to use any internal algorithm
it desires, subject to the below limitations, to generate a textual
preview for a message.
The FUZZY algorithm MUST be implemented by any server that supports
the PREVIEW extension.
The generated string MUST NOT be content transfer encoded and MUST be
encoded in UTF-8 [RFC3629]. For purposes of this section, a "preview
character" is defined as a single UCS character encoded in UTF-8.
The preview text MUST be treated as text/plain MIME data by the
client.
The server SHOULD limit the length of the preview text to 200 preview
characters. This length should provide sufficient data to generally
support both various languages (and their different average word
lengths) and different client display size requirements.
The server MUST NOT output preview text longer than 256 preview
characters.
The server SHOULD remove any formatting markup that exists in the
original text.
If the FUZZY algorithm generates a preview that is not based on the
body content of the message and the LANGUAGE [RFC5255] extension is
supported by the server, the preview text SHOULD be generated
according to the the language rules that apply to human-readable
text.
5. PREVIEW Priority Modifiers
5.1. LAZY
The LAZY modifier directs the server to return the preview
representation only if that data can be returned without undue delay
to the client.
This modifier allows a client to inform the server that preview data
is nice-to-have, but the server SHOULD NOT block the return of other
FETCH information at the expense of generating the preview data.
Slusarz Expires May 9, 2019 [Page 5]
Internet-Draft IMAP: PREVIEW Extension November 2018
For example, a client displaying the initial mailbox listing to a
user may want to display preview information associated with messages
in that listing. However, this information is secondary to providing
the mailbox listing, with message details, and the client is willing
to load any unavailable previwes in the background and display them
as they are provided by the server. In this case, the client would
use the LAZY modifier to the desired algorithm(s) to direct the
server to only return pre-generated preview data so that retrieval of
the other FETCH information is not blocked by possibly expensive
preview generation.
The LAZY modifier MUST be implemented by any server that supports the
PREVIEW extension.
6. Examples
Example 1: Requesting FETCH without explicit algorithm selection
C: A1 CAPABILITY
S: * CAPABILITY IMAP4rev1 PREVIEW=FUZZY
S: A1 OK Capability command completed.
[...a mailbox is SELECTed...]
C: A2 FETCH 1 (RFC822.SIZE PREVIEW)
S: * 1 FETCH (RFC822.SIZE 20000 PREVIEW (FUZZY {58}
S: This is the first line of text from the first text part.
S: ))
S: A2 OK FETCH complete.
Example 2: Requesting FETCH with explicit algorithm selection
C: B1 CAPABILITY
S: * CAPABILITY IMAP4rev1 PREVIEW=FUZZY
S: B1 OK Capability command completed.
[...a mailbox is SELECTed...]
C: B2 FETCH 1 (RFC822.SIZE PREVIEW (FUZZY))
S: * 1 FETCH (RFC822.SIZE 20000 PREVIEW (FUZZY {58}
S: This is the first line of text from the first text part.
S: ))
S: B2 OK FETCH complete.
Example 3: Requesting FETCH with invalid explicit algorithm selection
C: C1 CAPABILITY
S: * CAPABILITY IMAP4rev1 PREVIEW=FUZZY
S: C1 OK Capability command completed.
[...a mailbox is SELECTed...]
C: C2 FETCH 1 (RFC822.SIZE PREVIEW (X-PREVIEW-ALGO))
S: C2 BAD FETCH contains invalid preview algorithm name.
Slusarz Expires May 9, 2019 [Page 6]
Internet-Draft IMAP: PREVIEW Extension November 2018
Example 4: Use explicit algorithm priority selection, with LAZY
modifier, to obtain previews during initial mailbox listing if
readily available; otherwise, load previews in background
C: D1 CAPABILITY
S: * CAPABILITY IMAP4rev1 PREVIEW=FUZZY
S: D1 OK Capability command completed.
[...a mailbox is SELECTed...]
C: D2 FETCH 1:3 (ENVELOPE PREVIEW (LAZY=FUZZY))
S: * 1 FETCH (ENVELOPE ("Wed, 25 Oct 2017 15:03:11 +0000" [...])
PREVIEW (FUZZY {58}
S: This is the first line of text from the first text part.
S: ))
S: * 2 FETCH (PREVIEW (FUZZY "") ENVELOPE
("Thu, 26 Oct 2017 12:17:23 +0000" [...]))
S: * 3 FETCH (ENVELOPE ("Fri, 27 Oct 2017 22:19:21 +0000" [...])
PREVIEW (FUZZY NIL))
S: D2 OK FETCH completed.
[...Client knows that message 2 has a preview that is empty;
therefore, client only needs to request message 3 preview again
(e.g. in background)...]
C: D3 FETCH 3 (PREVIEW (FUZZY))
S: * 3 FETCH (PREVIEW (FUZZY {27}
S: First sentence of mail 3.
S: ))
S: D3 OK Fetch completed.
Slusarz Expires May 9, 2019 [Page 7]
Internet-Draft IMAP: PREVIEW Extension November 2018
Example 5: Retrieve preview information for search results within a
single mailbox. Use SEARCHRES [RFC5182] extension to save a round-
trip.
C: E1 CAPABILITY
S: * CAPABILITY IMAP4rev1 PREVIEW=FUZZY SEARCHRES
S: E1 OK Capability command completed.
[...a mailbox is SELECTed...]
C: E2 SEARCH RETURN (SAVE) FROM "FOO"
C: E3 FETCH $ (UID PREVIEW (LAZY=FUZZY))
S: E2 OK SEARCH completed.
S: * 5 FETCH (UID 13 PREVIEW (FUZZY {10}
S: Preview!
S: ))
S: * 9 FETCH (UID 23 PREVIEW (FUZZY NIL))
S: E3 OK FETCH completed.
[...Retrieve message 9 preview in background...]
C: E4 UID FETCH 23 (PREVIEW (FUZZY))
S: * 9 FETCH (PREVIEW (FUZZY {18}
S: Another preview!
S: ))
S: E4 OK FETCH completed.
7. Formal Syntax
The following syntax specification uses the augmented Backus-Naur
Form (BNF) as described in ABNF [RFC5234]. It includes definitions
from IMAP [RFC3501].
Slusarz Expires May 9, 2019 [Page 8]
Internet-Draft IMAP: PREVIEW Extension November 2018
capability =/ "PREVIEW=FUZZY"
fetch-att =/ "PREVIEW" [SP "(" preview-alg-fetch *(SP
preview-alg-fetch) ")"]
msg-att-dynamic =/ "PREVIEW" SP "(" preview-alg SP nstring ")"
preview-alg = "FUZZY" / preview-alg-ext
preview-alg-ext = preview-atom ; New algorithms MUST be
; registered with IANA
preview-alg-fetch = preview-alg / preview-mod "=" preview-alg
preview-atom = 1*<any ATOM-CHAR except "=">
preview-mod = "LAZY" / preview-mod-ext
preview-mod-ext = preview-atom ; New priority modifiers MUST be
; registered with IANA
8. Acknowledgements
The author would like to thank the following people for their
comments and contributions to this document: Stephan Bosch, Bron
Gondwana, Teemu Huovila, Steffen Lehmann, Chris Newman, Jeff Sipek,
Timo Sirainen, Steffen Templin, and Aki Tuomi.
9. IANA Considerations
IMAP4 [RFC3501] capabilities are registered by publishing a standards
track or IESG-approved experimental RFC. The registry is currently
located at:
http://www.iana.org/assignments/imap-capabilities
This document requests that IANA adds the "PREVIEW=FUZZY" capability
to the IMAP4 [RFC3501] capabilities registry.
10. Security Considerations
There are no known additional security issues with this extension
beyond those described in the base protocol described in IMAP4
[RFC3501].
Slusarz Expires May 9, 2019 [Page 9]
Internet-Draft IMAP: PREVIEW Extension November 2018
11. References
11.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC3501] Crispin, M., "INTERNET MESSAGE ACCESS PROTOCOL - VERSION
4rev1", RFC 3501, DOI 10.17487/RFC3501, March 2003,
<https://www.rfc-editor.org/info/rfc3501>.
[RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO
10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, November
2003, <https://www.rfc-editor.org/info/rfc3629>.
[RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax
Specifications: ABNF", STD 68, RFC 5234,
DOI 10.17487/RFC5234, January 2008,
<https://www.rfc-editor.org/info/rfc5234>.
[RFC5255] Newman, C., Gulbrandsen, A., and A. Melnikov, "Internet
Message Access Protocol Internationalization", RFC 5255,
DOI 10.17487/RFC5255, June 2008,
<https://www.rfc-editor.org/info/rfc5255>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
11.2. Informative References
[RFC2045] Freed, N. and N. Borenstein, "Multipurpose Internet Mail
Extensions (MIME) Part One: Format of Internet Message
Bodies", RFC 2045, DOI 10.17487/RFC2045, November 1996,
<https://www.rfc-editor.org/info/rfc2045>.
[RFC2854] Connolly, D. and L. Masinter, "The 'text/html' Media
Type", RFC 2854, DOI 10.17487/RFC2854, June 2000,
<https://www.rfc-editor.org/info/rfc2854>.
[RFC5182] Melnikov, A., "IMAP Extension for Referencing the Last
SEARCH Result", RFC 5182, DOI 10.17487/RFC5182, March
2008, <https://www.rfc-editor.org/info/rfc5182>.
Slusarz Expires May 9, 2019 [Page 10]
Internet-Draft IMAP: PREVIEW Extension November 2018
Appendix A. Change History (To be removed by RFC Editor before
publication)
Changes from draft-slusarz-imap-fetch-snippet-00:
o Added standardized language to Section 2 regarding IMAP ABNF
conventions
o Changed draft name to draft-ietf-extra-imap-fetch-snippet-##
Changes from draft-ietf-extra-imap-fetch-snippet-00:
o Changed nomenclature from "snippet" to "preview"
o Changed draft name to draft-ietf-extra-imap-fetch-preview-##
o Update to RFC 8174 boilerplate
o Updated length requirements for PREVIEW=FUZZY
o Added preview-atom ABNF to limit use of "=" character
o UTF-8 is a normative reference
o Clarify that characters for purpose of length limitations are
defined as UCS characters as encoded by UTF-8
o Fix some incorrect literal lengths in examples
Author's Address
Michael Slusarz
Open-Xchange Inc.
Denver, Colorado
US
Email: michael.slusarz@open-xchange.com
Slusarz Expires May 9, 2019 [Page 11]