Near Real Time Mirroring (NRTM) version 4
draft-ietf-grow-nrtm-v4-07
| Document | Type | Active Internet-Draft (grow WG) | |
|---|---|---|---|
| Authors | Sasha Romijn , Job Snijders , Edward Shryane , Stavros Konstantaras | ||
| Last updated | 2025-07-01 (Latest revision 2025-05-14) | ||
| Replaces | draft-spaghetti-grow-nrtm-v4 | ||
| RFC stream | Internet Engineering Task Force (IETF) | ||
| Intended RFC status | Proposed Standard | ||
| Formats | |||
| Additional resources |
GitHub Repository
Related Implementations Mailing list discussion |
||
| Stream | WG state | Submitted to IESG for Publication | |
| Associated WG milestone |
|
||
| Document shepherd | Paolo Lucente | ||
| Shepherd write-up | Show Last changed 2025-07-01 | ||
| IESG | IESG state | AD Evaluation::Revised I-D Needed | |
| Action Holders | |||
| Consensus boilerplate | Yes | ||
| Telechat date | (None) | ||
| Responsible AD | Mohamed Boucadair | ||
| Send notices to | paolo@ntt.net |
draft-ietf-grow-nrtm-v4-07
GROW S. Romijn
Internet-Draft Reliably Coded
Intended status: Standards Track J. Snijders
Expires: 15 November 2025 Fastly
E. Shryane
RIPE NCC
S. Konstantaras
AMS-IX
14 May 2025
Near Real Time Mirroring (NRTM) version 4
draft-ietf-grow-nrtm-v4-07
Abstract
This document specifies a one-way synchronization protocol for
Internet Routing Registry (IRR) records. The protocol allows
instances of IRR database servers to mirror IRR records, specified in
the Routing Policy Specification Language (RPSL), between each other.
Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on 15 November 2025.
Romijn, et al. Expires 15 November 2025 [Page 1]
Internet-Draft NRTM v4 May 2025
Copyright Notice
Copyright (c) 2025 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents (https://trustee.ietf.org/
license-info) in effect on the date of publication of this document.
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document. Code Components
extracted from this document must include Revised BSD License text as
described in Section 4.e of the Trust Legal Provisions and are
provided without warranty as described in the Revised BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Informal overview . . . . . . . . . . . . . . . . . . . . . . 3
3. Mirror server use . . . . . . . . . . . . . . . . . . . . . . 5
3.1. Key Configuration . . . . . . . . . . . . . . . . . . . . 5
3.2. Snapshot Initialization . . . . . . . . . . . . . . . . . 5
3.3. Publishing updates . . . . . . . . . . . . . . . . . . . 6
3.3.1. Delta Files . . . . . . . . . . . . . . . . . . . . . 6
3.3.2. Snapshot Files . . . . . . . . . . . . . . . . . . . 7
3.3.3. Update Notification File . . . . . . . . . . . . . . 7
3.3.4. Publication Policy Restrictions . . . . . . . . . . . 8
4. Mirror client use . . . . . . . . . . . . . . . . . . . . . . 8
4.1. Client Configuration . . . . . . . . . . . . . . . . . . 8
4.2. Initialization from snapshot . . . . . . . . . . . . . . 8
4.3. Processing Delta Files . . . . . . . . . . . . . . . . . 9
4.4. Signature and Staleness Verification . . . . . . . . . . 10
4.5. Policy Restrictions . . . . . . . . . . . . . . . . . . . 10
5. Update Notification File . . . . . . . . . . . . . . . . . . 11
5.1. Purpose . . . . . . . . . . . . . . . . . . . . . . . . . 11
5.2. Cache concerns . . . . . . . . . . . . . . . . . . . . . 11
5.3. Payload format and validation . . . . . . . . . . . . . . 11
5.4. Encoding and signature . . . . . . . . . . . . . . . . . 14
6. Snapshot File . . . . . . . . . . . . . . . . . . . . . . . . 14
6.1. Purpose . . . . . . . . . . . . . . . . . . . . . . . . . 14
6.2. Cache Concerns . . . . . . . . . . . . . . . . . . . . . 14
6.3. File format and validation . . . . . . . . . . . . . . . 14
7. Delta File . . . . . . . . . . . . . . . . . . . . . . . . . 15
7.1. Purpose . . . . . . . . . . . . . . . . . . . . . . . . . 15
7.2. Cache Concerns . . . . . . . . . . . . . . . . . . . . . 16
7.3. File format and validation . . . . . . . . . . . . . . . 16
8. Operational Considerations . . . . . . . . . . . . . . . . . 17
8.1. IRR object Validation . . . . . . . . . . . . . . . . . . 17
8.2. Intermediate mirror instances . . . . . . . . . . . . . . 18
Romijn, et al. Expires 15 November 2025 [Page 2]
Internet-Draft NRTM v4 May 2025
8.3. Reading from local files . . . . . . . . . . . . . . . . 19
8.4. Public key rotation . . . . . . . . . . . . . . . . . . . 19
9. Security Considerations . . . . . . . . . . . . . . . . . . . 20
10. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 20
11. Normative References . . . . . . . . . . . . . . . . . . . . 20
12. Informative References . . . . . . . . . . . . . . . . . . . 22
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 22
1. Introduction
The Internet Routing Registry (IRR) consists of several IRR
Databases, each storing objects in the Routing Policy Specification
Language (RPSL). About a dozen larger IRR Databases are well known
and widely used, operated by different organisations, like RIRs and
some large network operators. IRR objects serve many purposes,
ranging from manual research by operators to automated network
configuration and filtering.
Most of these well known IRR Databases mirror IRR objects from some
others, so that queries run against these instances provide a
comprehensive view. Some parties also mirror IRR Databases to
private IRR server instances, to reduce latency in queries, analyze
IRR objects, or other purposes.
NRTM version 4 is a protocol for IRR mirroring, designed to address
issues in existing IRR Database mirroring protocols. In NRTMv4, IRR
Databases publish their records on an HTTPS endpoint, with periodic
Snapshot Files and regular Delta Files. Signing allows integrity
checks. By only generating files once and publishing them over
HTTPS, scalability is dramatically improved. It borrows some
concepts in [RFC8182], as there are overlaps between the two
protocols.
Of earlier NRTM versions, particularly NRTMv3 [NRTMv3] was widely
deployed, although there is no formal specification. Some
comparisons are made in Section 9.
2. Informal overview
In NRTMv4, a mirror server is an instance of IRR Database software
that has a database of IRR objects and publishes them to allow
mirroring by others. This can be retrieved by mirror clients, which
then load the IRR objects into their local storage.
Publication consists of three different files:
Romijn, et al. Expires 15 November 2025 [Page 3]
Internet-Draft NRTM v4 May 2025
* A single Update Notification File. This specifies the current
Database version and locations of the Snapshot File and Delta
Files. It is signed to allow verification of the authenticity of
the Update Notification File.
* A single active Snapshot File. This contains all published IRR
objects at a particular version. The mirror server periodically
generates a new snapshot.
* Zero or more Delta Files. These contain the changes between two
database version numbers.
The Update Notification File MUST be in the JSON Web Signature
[RFC7515] format, where the payload is in the JavaScript Object
Notation (JSON) format [RFC8259]. The Snapshot File and Delta Files
MUST be in the JSON Text Sequences [RFC7464] format, so that each
object in large files can be parsed independently. All files MUST
use UTF-8 encoding and MAY be compressed with GZIP [RFC1952].
Mirror clients initially retrieve the small Update Notification File
and a Snapshot File, from which they initialize their local copy of
the Database. After that, mirror clients only retrieve the Update
Notification File periodically to determine whether there are any
changes, and then retrieve only the relevant Delta Files, if any.
This minimizes data transfer. Deltas have sequential versions.
Mirror clients are configured with the URL of an Update Notification
File, name of the IRR Database, and a public signing key. This
public key is used to verify the Update Notification File, which in
turn contains hashes of all the Snapshot and Delta Files.
Upon initialization, the mirror server generates a session ID for the
Database. This allows long term caching and used by the client to
determine that the Delta Files continue to form a full set of changes
allowing an update to the latest version. If the mirror server loses
partial history, or the mirror client starts mirroring from a
different server, the session ID change will force a full reload from
the latest Snapshot File, ensuring there are no accidental mirroring
gaps.
Mirror servers can use caching to reduce their load, particularly
because snapshots and deltas are immutable for a given session ID and
version number. These are also the largest files. Update
Notification Files may not be cached for longer than one minute, but
are fairly small.
Romijn, et al. Expires 15 November 2025 [Page 4]
Internet-Draft NRTM v4 May 2025
Note that in NRTMv4, a contiguous version number is used for the
Database version and Delta Files. This is different and unrelated to
the serial in NRTMv3. NRTMv3 serials refer to a single change to a
single object, whereas a NRTMv4 version refers to one delta, possibly
containing multiple changes to multiple objects. NRTMv3 serials can
also contain gaps, NRTMv4 versions may not.
3. Mirror server use
3.1. Key Configuration
When enabling NRTMv4 publication for an IRR Database, the operator
MUST generate and configure a private Elliptic Curve JSON Web Key
[RFC7517]. The operator then provides this public key, the name of
the IRR Database, and publication URL of the Update Notification File
to any operators of mirror clients. The published public key MUST be
encoded in PEM. The process for providing this is not in scope of
this protocol, but a typical case is publication on the operator's
known website. Key rotation is described in Section 8.4.
It is RECOMMENDED that implementations provide easily accessible
tools for operators to generate new signing keys to enter into their
configuration and assist with key rotation. All configuration
options SHOULD be clearly named to indicate that they are private
keys.
3.2. Snapshot Initialization
A mirror server MUST follow the initialization steps upon the first
export for an IRR Database by that mirror server, or if the server
lost history and can not reliably produce a continuous set of deltas
from a previous state.
In other words, either the mirror server guarantees that clients
following the deltas have a correct and complete view, or MUST
reinitialize, which will force clients to reinitialize as well.
Initialization consists of these actions:
* The mirror server MUST generate a new session ID. This MUST be a
random v4 UUID [RFC4122] and MUST be the same across all client
sessions. The session ID is unique to the IRR Database, so an
instance that serves multiple IRR Databases, will create a
separate session ID for each.
* The server MUST generate a snapshot for version number one. This
may contain an empty array of objects if the IRR Database is
currently empty.
Romijn, et al. Expires 15 November 2025 [Page 5]
Internet-Draft NRTM v4 May 2025
* The server MUST generate a new Update Notification File with the
new session ID, a reference to the new snapshot, and no deltas.
Note that a publication, and its associated session IDs and versions,
always relates to a single specific IRR Database, even if multiple
databases are published from one instance. For example, a mirror
server publishing NRTMv4 for RIPE and RIPE-NONAUTH, will generate two
Update Notification Files, referring two Snapshot Files, and two sets
of Delta Files each with contiguous version numbers - all completely
independent to each other, with different session IDs, potentially at
different times. This applies even if the same IRR server instance
produces both.
3.3. Publishing updates
After creating the initialization files, the mirror server processes
updates by publishing Delta Files and, periodically, a new Snapshot
File.
3.3.1. Delta Files
Changes to IRR objects MUST be recorded in Delta Files. One Delta
File can contain multiple changes.
Updates are generated as follows:
* A mirror server MUST publish a Delta File approximately every
minute, if there have been changes to IRR objects in that time
frame.
* If a mirror server is lagging in production of Delta Files, such
as after an initialization or server downtime, it MUST generate
one larger "catch up" Delta File, rather than individual Delta
Files for every one minute window.
* A new Delta File MUST be generated with a new version, one greater
than the last Delta File version, or one greater than the last
Snapshot File version if there were no prior deltas at all.
* The Delta File MUST include all changes that happened during the
time frame, in the order in which they occurred. If multiple
changes have occurred within the time frame that would cancel each
other out, like an addition and immediate deletion of the same
object, the mirror server MUST still include all these changes.
Romijn, et al. Expires 15 November 2025 [Page 6]
Internet-Draft NRTM v4 May 2025
* The URL where the Delta File is published MUST contain the session
ID and version number to allow it to be indefinitely cached. It
MUST also contain a random value that can not be predicted before
publication, to counter negative caching issues.
* After generating a new Delta File, a mirror server SHOULD remove
all Delta Files older than 24 hours.
* The Update Notification File MUST be updated to include the new
Delta File and update the database version.
* Note that, as Delta Files always contain changes compared to a
previous state, there can never be a Delta File with version 1.
3.3.2. Snapshot Files
Snapshot Files after initialization are generated as follows:
* The mirror server MUST generate a new Snapshot File between once
per hour and once per day, if there have been changes to the IRR
objects.
* The version number of the new snapshot MUST be equal to the last
Delta File version.
* If there have been no changes to the IRR objects since the last
snapshot, the mirror server MUST NOT generate a new snapshot.
* The URL where the Snapshot File is published MUST contain the
session ID and version number to allow it to be indefinitely
cached. It MUST also contain a random value that can not be
predicted before publication, to counter negative caching issues.
* The Update Notification File MUST be updated to include the new
snapshot, if one was generated.
* Snapshot generation may take some time, and in that time newer
changes may occur that are not part of the snapshot in progress.
The mirror server SHOULD continue to produce Delta Files during
this window, which means the server MAY publish a Snapshot File
with a version number older than the most recent Delta File at the
time of publication.
3.3.3. Update Notification File
The Update Notification File MUST be updated when a new Delta or
Snapshot File is published and, even if there have been no changes,
at least every 24 hours.
Romijn, et al. Expires 15 November 2025 [Page 7]
Internet-Draft NRTM v4 May 2025
3.3.4. Publication Policy Restrictions
A mirror server MAY have a policy that restricts the publication of
certain IRR objects or attributes, or modifies these before
publication. Typical scenarios for this include preventing the
distribution of certain personal data or password hashes, or
excluding objects which do not meet validation rules like RPKI
consistency. It is RECOMMENDED to modify objects in such a way that
this change is evident to humans reading the object text, for example
by adding remark lines or comments.
Mirror servers are RECOMMENDED to remove password hashes from the
auth lines in mntner objects, as they have little use beyond the
authoritative server, and their publication may be a security risk.
If a mirror server has a policy that restricts or modifies object
publication, this MUST be applied consistently to Snapshot Files and
Delta Files from the moment the policy is enacted or modified.
4. Mirror client use
4.1. Client Configuration
Mirror clients are configured with the name of the IRR Database, the
URL of the Update Notification File, and the public key currently
used for signing the Update Notification File. Key rotation is
described in Section 8.4.
4.2. Initialization from snapshot
Clients MUST initialize from a Snapshot File when initially
configured or if they are not able to update their local data from
the provided Delta Files:
* The client MUST retrieve the Update Notification File.
* The client MUST verify that the source attribute in the Update
Notification File matches the configured IRR Database name.
* The client MUST retrieve the Snapshot File and load the objects
into its local storage.
* The mirror client MUST verify that the hash of the Snapshot File
matches the hash in the Update Notification File that referenced
it. If the Snapshot File was compressed with GZIP, the hash MUST
match the compressed data. In case of a mismatch of this hash,
the file MUST be rejected.
Romijn, et al. Expires 15 November 2025 [Page 8]
Internet-Draft NRTM v4 May 2025
* The client MUST record the session_id and version of the loaded
Snapshot File.
4.3. Processing Delta Files
If a mirror client has previously initialized from a snapshot:
* The client MUST retrieve the Update Notification File.
* The client MUST verify that the source attribute in the Update
Notification File matches the configured IRR Database name.
* The client MUST verify that the session ID matches the previously
known session ID. If this does not match, the client MUST
reinitialize from the snapshot.
* The client MUST verify that the Update Notification File version
is the same or higher than the client's current most recent
version. If not, the Update Notification File MUST be rejected.
It is RECOMMENDED for the client to distinguish between an Update
Notification File that is a single version older, and a much older
version, in any status messages. The former can occur from time
to time in synchronisation issues, the latter is more likely a
faulty implementation.
* The client MUST verify that the Update Notification File contains
one contiguous set of Delta File versions after the client's
current most recent version up to the latest version in the Update
Notification File. If the Delta File versions are not contiguous,
the Update Notification File MUST be rejected. If the available
Delta File versions do not range from the client's most recent
version plus one, the client MUST reinitialize from the snapshot.
* The mirror client MUST verify that the hashes of each Delta and
Snapshot File have not changed compared to previous entries seen
for the same file type and version. If a newer Update
Notification File contains a different hash for a specific file,
this indicates a misconfiguration in the server and the client
MUST reject the Update Notification File. The client can do this
by recording the files referenced by the previous valid Update
Notification File and comparing the overlapping entries with the
retrieved Update Notification File.
* The client MUST retrieve all Delta Files for versions since the
client's last known version, if there are any.
Romijn, et al. Expires 15 November 2025 [Page 9]
Internet-Draft NRTM v4 May 2025
* The mirror client MUST verify that the hash of each newly
downloaded Delta File matches the hash in the Update Notification
File that referenced it. If the Delta File was compressed with
GZIP, the hash MUST match the compressed file. In case of a
mismatch of this hash, the Delta File MUST be rejected.
* The client MUST process all changes in the Delta Files in order:
lowest Delta File version number first, and in the order of the
changes list in the Delta File.
* The client MUST update its records of the most recent version to
the version of the Update Notification File.
If the Update Notification File or one of the Delta Files is
rejected, the mirror client MUST NOT process any newer Deltas than
those that are valid and have been successfully verified. If some
Delta Files are rejected, it MAY process the valid Delta Files, but
MUST NOT skip over any rejected Delta Files while doing so.
Additionally, the changes in a specific Delta File MUST be processed
either completely, or not at all, i.e. a Delta File must never be
partially processed.
4.4. Signature and Staleness Verification
Every time a mirror client retrieves a new version of the Update
Notification File, it MUST verify the included signature. The
signature MUST be valid for the configured public key for the
contents of the Update Notification File. If the signature does not
match, the mirror client MUST reject the Update Notification File,
unless a key rotation is in progress as described in Section 8.4.
A mirror client can use the generation timestamp in the Update
Notification File to check whether the file is stale, as the mirror
server must update this file at least every 24 hours. If the
generation timestamp is more than 24 hours ago, the file is stale and
the mirror client SHOULD warn the operator in log messages or other
alerting, but MAY continue to process it otherwise.
4.5. Policy Restrictions
A mirror client MAY have a policy that restricts the processing of
objects to certain object classes, or other limitations on which
objects it processes.
If a mirror client has a policy that restricts object processing,
this MUST be applied consistently to Snapshot Files and Delta Files
from the moment the policy is enacted or modified.
Romijn, et al. Expires 15 November 2025 [Page 10]
Internet-Draft NRTM v4 May 2025
5. Update Notification File
5.1. Purpose
The Update Notification File is generated by the mirror server and
used by mirror clients to discover whether any changes exist between
the state of the IRR mirror server and of the mirror client. It also
describes the location of the Snapshot File and incremental Delta
Files. Finally, the generation timestamp can be used to detect
whether the file is stale.
The mirror server MUST generate a new Update Notification File every
time there are new deltas or snapshots and, even if there have been
no changes, at least every 24 hours.
5.2. Cache concerns
A mirror server may use caching infrastructure to cache the Update
Notification File and reduce the load of HTTPS requests.
However, since this file is used by mirror clients to determine
whether any updates are available, the mirror server SHOULD ensure
that this file is not cached for longer than one minute. An
exception to this rule is that it is better to serve a stale Update
Notification File rather than no Update Notification File.
5.3. Payload format and validation
Example payload of an Update Notification File:
Romijn, et al. Expires 15 November 2025 [Page 11]
Internet-Draft NRTM v4 May 2025
{
"nrtm_version": 4,
"timestamp": "2022-01-01T15:00:00Z",
"type": "notification",
"next_signing_key": "bnJ0..bXY0",
"source": "EXAMPLE",
"session_id": "ca128382-78d9-41d1-8927-1ecef15275be",
"version": 4,
"snapshot": {
"version": 3,
"url": "ca128382-78d9-41d1-8927-1ecef15275be/nrtm-snapshot.2.047595d0fae972fbed0c51b4a41c7a349e0c47bb.json.gz",
"hash": "9a..86"
},
"deltas": [
{
"version": 2,
"url": "ca128382-78d9-41d1-8927-1ecef15275be/nrtm-delta.1.784a2a65aba22e001fd25a1b9e8544e058fbc703.json",
"hash": "62..a2"
},
{
"version": 3,
"url": "ca128382-78d9-41d1-8927-1ecef15275be/nrtm-delta.2.0f681f07cfab5611f3681bf030ec9f6fa3442fb0.json",
"hash": "25..9a"
},
{
"version": 4,
"url": "ca128382-78d9-41d1-8927-1ecef15275be/nrtm-delta.3.d9c194acbb2cb0d4088c9d8a25d5871cdd802c79.json",
"hash": "b4..13"
}
],
"metadata": {}
}
Note: hash and key values in this example are shortened because of
formatting.
The following validation rules MUST be observed when creating or
parsing Update Notification Files:
* The nrtm_version MUST be 4.
* The timestamp MUST be an [RFC3339] timestamp with the time-offset
set to "Z".
* The type MUST be "notification".
Romijn, et al. Expires 15 November 2025 [Page 12]
Internet-Draft NRTM v4 May 2025
* The optional field next_signing_key is used for in-band key
rotation. If present, it MUST be an Elliptic Curve JWK [RFC7517]
public key encoded in PEM, which matches the private key the
mirror server will start using to sign the Update Notification
File in the near future. Key rotation is described in
Section 8.4. If there is no next signing key, this key MUST be
omitted.
* The source MUST be a valid IRR object name [RFC2622].
* The session_id attribute MUST be a random v4 UUID [RFC4122] unique
to this session for this source.
* The version MUST be an unsigned positive integer and be equal to
the highest version of the deltas and snapshot.
* The file MUST contain exactly one snapshot.
* The file MAY contain one or more deltas.
* The deltas MUST have a sequential contiguous set of version
numbers.
* Each snapshot and delta element MUST have a version, URL and hash
attribute. The URL must be relative to the path of the Update
Notification File. For example, if the Update Notification File
example above is published on https://example.com/nrtm/update-
notification-file.json, the full URL for the referred snapshot is
https://example.com/nrtm/ca128382-78d9-41d1-8927-1ecef15275be/
nrtm-snapshot.2.047595d0fae972fbed0c51b4a41c7a349e0c47bb.json.gz.
If the snapshot or delta file was compressed with GZIP, the
filename MUST end in ".gz". and the hash MUST match the compressed
data.
* The hash attribute in snapshot and delta elements MUST be the
hexadecimal encoding of the SHA-256 hash [SHS] of the referenced
file. The mirror client MUST verify this hash when the file is
retrieved and reject the file if the hash does not match.
* The metadata key MAY be present, used for metadata produced by the
server to aid in tracing and debugging. This can contain
information like the name of the host on which the file was
generated or the name and version of the software used. Each
mirror server may choose which fields to include, or choose to not
include any metadata. The mirror server SHOULD not cause
excessive size increases by adding extensive metadata in the
Update Notification File, as it is the most frequently retrieved
file.
Romijn, et al. Expires 15 November 2025 [Page 13]
Internet-Draft NRTM v4 May 2025
5.4. Encoding and signature
* The actual Update Notification File contents MUST be a JSON Web
Signature [RFC7515] and MUST use JWS Compact Serialization.
* The JWS Payload MUST be the JavaScript Object Notation (JSON)
[RFC8259] serialization of the structure described in the previous
section.
* The filename of the serialized data MUST be "update-notification-
file.jose".
* The algorithm MUST NOT be Deprecated, and it is RECOMMENDED to use
Recommended or Recommended+ algorithms, as defined in JSON Web
Algorithms [RFC7518]
6. Snapshot File
6.1. Purpose
The Snapshot File reflects the complete and current contents of all
IRR objects in an IRR Database. Mirror clients MUST use this to
initialize their local copy of the IRR Database.
6.2. Cache Concerns
A snapshot reflects the content of the IRR Database at a specific
point in time; for that reason, it can be considered immutable data.
Snapshot Files MUST be published at a URL that is unique to the
specific session and version. The URL MUST also contain a random
value that can not be predicted before publication, to counter
negative caching issues.
Because these files never change, they MAY be cached indefinitely.
However, as snapshots are large and old snapshots will no longer be
referred by newer Update Notification Files, it is RECOMMENDED that a
limited interval is used in the order of hours or days.
To avoid race conditions where a mirror client retrieves an Update
Notification File moments before it's updated, mirror servers SHOULD
retain old Snapshot Files for at least 5 minutes after a new Update
Notification File is published.
6.3. File format and validation
Example Snapshot File:
Romijn, et al. Expires 15 November 2025 [Page 14]
Internet-Draft NRTM v4 May 2025
␞{
"nrtm_version": 4,
"type": "snapshot",
"source": "EXAMPLE",
"session_id": "ca128382-78d9-41d1-8927-1ecef15275be",
"version": 3
}
␞{"object": "route: 192.0.2.0/24\norigin: AS65530\nsource: EXAMPLE"}
␞{"object": "route: 2001:db8::/32\norigin: AS65530\nsource: EXAMPLE"}
Note: IRR object texts in this example are shortened because of
formatting.
The file is in JSON Text Sequences [RFC7464] format, and MUST contain
one or more records (it must contain at least the header). The first
record is the file header, and the following validation rules MUST be
observed when creating or parsing a Snapshot File header:
* The nrtm_version MUST be 4.
* The type MUST be "snapshot".
* The source MUST match the source in the Update Notification File.
* The session_id attribute MUST match the session_id in the Update
Notification File.
* The version MUST be an unsigned positive integer, matching the
Update Notification File entry for this snapshot.
The remaining records (zero or more) MUST each contain a string
representation of an IRR object. The source attribute in the IRR
object texts MUST match the source attribute of the Snapshot File.
7. Delta File
7.1. Purpose
A Delta File contains all changes for exactly one incremental update
of the IRR Database. It may include new, modified and deleted
objects. Delta Files can contain multiple alterations to multiple
objects.
Romijn, et al. Expires 15 November 2025 [Page 15]
Internet-Draft NRTM v4 May 2025
7.2. Cache Concerns
Deltas reflect the difference in content of the IRR Database from one
version to another; for that reason, it can be considered immutable
data. Delta Files MUST be published at a URL that is unique to the
specific session and version. The URL MUST also contain a random
value that can not be predicted before publication, to counter
negative caching issues.
To avoid race conditions where a mirror client retrieves an Update
Notification File moments before it's updated, mirror servers SHOULD
retain old Delta Files for at least 5 minutes after a new Update
Notification File is published that no longer contains these Delta
Files.
7.3. File format and validation
Example Delta File:
␞{
"nrtm_version": 4,
"type": "delta",
"source": "EXAMPLE",
"session_id": "ca128382-78d9-41d1-8927-1ecef15275be",
"version": 3
}
␞{
"action": "delete",
"object_class": "person",
"primary_key": "PRSN1-EXAMPLE"
}
␞{
"action": "delete",
"object_class": "route",
"primary_key": "192.0.2.0/24AS65530"
}
␞{
"action": "add_modify",
"object": "route: 2001:db8::/32\norigin: AS65530\nsource: EXAMPLE"
}
Note: IRR object texts in this example are shortened because of
formatting.
The file is in JSON Text Sequences [RFC7464] format, and MUST contain
two or more records (at least the header and one change). The first
record is the file header, and the following validation rules MUST be
observed when creating or parsing a Delta File header:
Romijn, et al. Expires 15 November 2025 [Page 16]
Internet-Draft NRTM v4 May 2025
* The nrtm_version MUST be 4.
* The type MUST be "delta".
* The source MUST match the source in the Update Notification File.
* The session_id attribute MUST match the session_id in the Update
Notification File.
* The version MUST be an unsigned positive integer, matching the
Update Notification File entry for this delta.
The remaining records (one or more) MUST each contain a JSON object
representing a change, which MUST meet the following rules:
* An action attribute, which is either "delete" for object
deletions, or "add_modify" for additions or modifications.
* If action is "delete": an object_class attribute with the RPSL
object class name, and a primary_key attribute with the primary
key, of the deleted object. For objects that are listed in
[RFC2622] and [RFC4012] the primary key is the value of the RPSL
field defined as "class key". For object classes that define a
pair of attributes as class key, e.g. route, the values of the
individual attributes are appended together without separators.
For any other objects, the primary key is the value of the RPSL
field with the same name as the object class name. The primary
key and object class name are not case sensitive and therefore
mirror clients MUST use case insensitive matching against their
local database.
* If action is "add_modify": an object attribute with the RPSL text
of the new version of the object.
8. Operational Considerations
8.1. IRR object Validation
Throughout the years, various implementations of IRR servers have
taken liberties with the various RFCs regarding RPSL.
Implementations have introduced different new object classes,
attributes and validation rules. Current IRR Databases also contain
legacy objects which were created under different validation rules.
In practice, there is no uniformly implemented standard for RPSL, but
merely rough outlines partially documented in different places.
Romijn, et al. Expires 15 November 2025 [Page 17]
Internet-Draft NRTM v4 May 2025
This has the potential to create interoperability issues. Some are
addressed by NRTMv4, like having a consistent character set when
mirroring data between implementations. However, some issues can not
be addressed in this way, such as one implementation introducing a
new object class that is entirely unknown to another implementation.
A mirror client SHOULD be able to handle unknown object classes and
objects that are invalid according to its own validation rules, which
may mean simply discarding them, without rejecting remaining objects
or preventing future updates.
It is RECOMMENDED for mirror clients to log these cases, particularly
those where an object was discarded due to violating validation
rules. These cases create an inconsistency between the IRR objects
of the server and client, and logs facilitate later analysis.
It is RECOMMENDED for mirror clients to be flexible where possible
and reasonable when applying their own validation rules to IRR
objects retrieved from mirror servers. For example, a route object
with an origin attribute that is not a valid AS number can't be
usefully interpreted. There is no way for an IRR server to correctly
parse and index such an object. However, a route-set object whose
name does not start with "RS-" [RFC2622], or an inetnum with an
unknown extra "org" attribute, still allows the mirror client to
interpret it unambiguously even if it does not meet the mirror
client's own validation rules for authoritative records.
8.2. Intermediate mirror instances
An IRR Database generally has a single authoritative source. In some
cases, an instance run by a third party will function as a kind of
intermediate: both being a mirror client, mirroring IRR objects from
the authoritative source, and simultaneously function as a mirror
server to yet another mirror client.
There are various operational reasons for such a setup, such as the
intermediate filtering certain records. Regardless of the reason,
the mirror client and server function of an IRR server must be
treated as separate processes. In particular, this means they MUST
have separate session IDs. The intermediate server MUST NOT
republish the same files it retrieved from the authoritative source
with the same session ID.
Romijn, et al. Expires 15 November 2025 [Page 18]
Internet-Draft NRTM v4 May 2025
8.3. Reading from local files
In the typical use case for NRTMv4, a mirror client retrieves files
from an HTTPS endpoint. However, implementations MAY also support
reading from files on the local filesystem instead, for when
operators want to use a different method to retrieve or distribute
the files. When reading from local files, mirror clients SHOULD
still follow all validation rules, including the validation of the
signature and hashes.
8.4. Public key rotation
It is RECOMMENDED that IRR Database operators rotate the signing key
on their mirror server about once per year. The next_signing_key
field in the Update Notification File supports in-band key rotation
using the following process:
* The server operator generates a new key and configures this in the
mirror server implementation as the upcoming new signing key.
* The mirror server MUST include this key in the next_signing_key
field in any Update Notification File generated while the new
signing key is configured. Hence, the new signing key will start
being propagated to the mirror clients with the next publication
of the Notification File, which will take at most 24 hours.
Mirror server implementations MAY offer a method to cause the
Notification Update File to be refreshed earlier, with the
new_signing_key included, and thus start the propagation earlier.
* When mirror clients next retrieve the Update Notification File,
they MUST detect the next_signing_key field, and store the key in
their configuration.
* After allowing mirror clients time to have seen the new Update
Notification File with the next_signing_key field, the mirror
server operator configures the new key as currently active key,
and removes the old key. Any Update Notification File generated
after this point MUST be signed with this new key, and will not
contain a next_signing_key field.
* The RECOMMENDED period between publication of the upcoming key in
the next_signing_key field, and removal of the old key, is one
week. This offers all active clients a reasonable chance to
follow the rotation process.
* When mirror clients retrieve an Update Notification File and find
that the signature does not match, they MUST attempt to verify
against a next_signing_key encountered in a previous (valid) file.
Romijn, et al. Expires 15 November 2025 [Page 19]
Internet-Draft NRTM v4 May 2025
If the signature matches for this new key, the client MUST update
its configuration to use the new key for validation. After this,
the client MUST NOT use the old key for validation at any time: a
mirror server can not switch back to an old key.
If a mirror client never retrieves an Update Notification file at any
point during the rotation process, it will no longer be able to
verify the signature. In that scenario manual recovery is required,
similar to a first time configuration of a new mirror client.
9. Security Considerations
IRR objects serve many purposes, including automated network
configuration and filtering. Manipulation of IRR objects can
therefore have a significant security impact. However, security in
existing protocols is mostly absent.
Before NRTMv4, the most common protocols for IRR Database mirroring
are FTP for retrieving full snapshots, and NRTM version 3 for
retrieving later changes. There are no provisions for integrity or
authenticity, and there are various scenarios where mirroring may not
be reliable.
NRTMv4 requires integrity verification. The Delta and Snapshot Files
are verified using the SHA-256 hash in the Update Notification File,
and the Update Notification File is verified using its signature.
Additionally, the channel security offered by HTTPS further limits
security risks.
By allowing publication on any HTTPS endpoint, NRTMv4 allows for
extensive scaling, and there are many existing techniques and
services to protect against denial-of-service attacks. In contrast,
NRTMv3 required mirror clients to directly query the IRR server
instance with special whois queries. This scales poorly, and there
are no standard protections against denial-of-service available.
The HTTPS endpoint used for NRTMv4 MUST be configured according to
the best practices in [RFC9325]. Mirror clients MUST NOT use other
protocols than HTTPS, such as HTTP or FTP.
10. Acknowledgments
The authors would like to thank George Michaelson, Shon Huang, Tim
Bruijnzeels, Mahesh Aggarwal, Fedor Vompe, and Paul Etchells for
their helpful review of this document and/or work on implementations.
11. Normative References
Romijn, et al. Expires 15 November 2025 [Page 20]
Internet-Draft NRTM v4 May 2025
[RFC1952] Deutsch, P., "GZIP file format specification version 4.3",
RFC 1952, DOI 10.17487/RFC1952, May 1996,
<https://www.rfc-editor.org/info/rfc1952>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
[RFC2622] Alaettinoglu, C., Villamizar, C., Gerich, E., Kessens, D.,
Meyer, D., Bates, T., Karrenberg, D., and M. Terpstra,
"Routing Policy Specification Language (RPSL)", RFC 2622,
DOI 10.17487/RFC2622, June 1999,
<https://www.rfc-editor.org/info/rfc2622>.
[RFC3339] Klyne, G. and C. Newman, "Date and Time on the Internet:
Timestamps", RFC 3339, DOI 10.17487/RFC3339, July 2002,
<https://www.rfc-editor.org/info/rfc3339>.
[RFC4122] Leach, P., Mealling, M., and R. Salz, "A Universally
Unique IDentifier (UUID) URN Namespace", RFC 4122,
DOI 10.17487/RFC4122, July 2005,
<https://www.rfc-editor.org/info/rfc4122>.
[RFC4012] Blunk, L., Damas, J., Parent, F., and A. Robachevsky,
"Routing Policy Specification Language next generation
(RPSLng)", RFC 4012, DOI 10.17487/RFC4012, March 2005,
<https://www.rfc-editor.org/info/rfc4012>.
[RFC7464] Williams, N., "JavaScript Object Notation (JSON) Text
Sequences", RFC 7464, DOI 10.17487/RFC7464, February 2015,
<https://www.rfc-editor.org/info/rfc7464>.
[RFC7515] Jones, M., Bradley, J., and N. Sakimura, "JSON Web
Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, May
2015, <https://www.rfc-editor.org/info/rfc7515>.
[RFC7517] Jones, M., "JSON Web Key (JWK)", RFC 7517,
DOI 10.17487/RFC7517, May 2015,
<https://www.rfc-editor.org/info/rfc7517>.
[RFC7518] Jones, M., "JSON Web Algorithms (JWA)", RFC 7518,
DOI 10.17487/RFC7518, May 2015,
<https://www.rfc-editor.org/info/rfc7518>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
Romijn, et al. Expires 15 November 2025 [Page 21]
Internet-Draft NRTM v4 May 2025
[RFC8259] Bray, T., Ed., "The JavaScript Object Notation (JSON) Data
Interchange Format", STD 90, RFC 8259,
DOI 10.17487/RFC8259, December 2017,
<https://www.rfc-editor.org/info/rfc8259>.
[RFC9325] Sheffer, Y., Saint-Andre, P., and T. Fossati,
"Recommendations for Secure Use of Transport Layer
Security (TLS) and Datagram Transport Layer Security
(DTLS)", BCP 195, RFC 9325, DOI 10.17487/RFC9325, November
2022, <https://www.rfc-editor.org/info/rfc9325>.
[SHS] National Institute of Standards and Technology, "Secure
Hash Standard", March 2012,
<https://csrc.nist.gov/publications/fips/fips180-4/fips-
180-4.pdf>.
12. Informative References
[RFC8182] Bruijnzeels, T., Muravskiy, O., Weber, B., and R. Austein,
"The RPKI Repository Delta Protocol (RRDP)", RFC 8182,
DOI 10.17487/RFC8182, July 2017,
<https://www.rfc-editor.org/info/rfc8182>.
[NRTMv3] RIPE NCC, "Access to NRTM(v3)", July 2024,
<https://docs.db.ripe.net/RIPE-Database-Mirror/Access-to-
NRTM/>.
Authors' Addresses
Sasha Romijn
Reliably Coded
Amsterdam
Netherlands
Email: sasha@reliablycoded.nl
Job Snijders
Fastly
Amsterdam
Netherlands
Email: job@fastly.com
Edward Shryane
RIPE NCC
Amsterdam
Netherlands
Email: eshryane@ripe.net
Romijn, et al. Expires 15 November 2025 [Page 22]
Internet-Draft NRTM v4 May 2025
Stavros Konstantaras
AMS-IX
Amsterdam
Netherlands
Email: stavros.konstantaras@ams-ix.net
Romijn, et al. Expires 15 November 2025 [Page 23]