Skip to main content

Encrypted Content-Encoding for HTTP
draft-ietf-httpbis-encryption-encoding-06

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft that was ultimately published as RFC 8188.
Author Martin Thomson
Last updated 2016-12-22
Replaces draft-thomson-http-encryption
RFC stream Internet Engineering Task Force (IETF)
Formats
Reviews
Additional resources Mailing list discussion
Stream WG state WG Document
Document shepherd Mark Nottingham
IESG IESG state Became RFC 8188 (Proposed Standard)
Consensus boilerplate Yes
Telechat date (None)
Responsible AD (None)
Send notices to "Mark Nottingham" <mnot@mnot.net>
draft-ietf-httpbis-encryption-encoding-06
HTTP Working Group                                            M. Thomson
Internet-Draft                                                   Mozilla
Intended status: Standards Track                       December 22, 2016
Expires: June 25, 2017

                  Encrypted Content-Encoding for HTTP
               draft-ietf-httpbis-encryption-encoding-06

Abstract

   This memo introduces a content coding for HTTP that allows message
   payloads to be encrypted.

Note to Readers

   Discussion of this draft takes place on the HTTP working group
   mailing list (ietf-http-wg@w3.org), which is archived at
   https://lists.w3.org/Archives/Public/ietf-http-wg/ .

   Working Group information can be found at http://httpwg.github.io/ ;
   source code and issues list for this draft can be found at
   https://github.com/httpwg/http-extensions/labels/encryption .

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on June 25, 2017.

Copyright Notice

   Copyright (c) 2016 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents

Thomson                   Expires June 25, 2017                 [Page 1]
Internet-Draft           HTTP encryption coding            December 2016

   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
     1.1.  Notational Conventions  . . . . . . . . . . . . . . . . .   3
   2.  The "aes128gcm" HTTP Content Coding . . . . . . . . . . . . .   3
     2.1.  Encryption Content Coding Header  . . . . . . . . . . . .   5
     2.2.  Content Encryption Key Derivation . . . . . . . . . . . .   6
     2.3.  Nonce Derivation  . . . . . . . . . . . . . . . . . . . .   6
   3.  Examples  . . . . . . . . . . . . . . . . . . . . . . . . . .   7
     3.1.  Encryption of a Response  . . . . . . . . . . . . . . . .   7
     3.2.  Encryption with Multiple Records  . . . . . . . . . . . .   8
   4.  Security Considerations . . . . . . . . . . . . . . . . . . .   8
     4.1.  Key and Nonce Reuse . . . . . . . . . . . . . . . . . . .   9
     4.2.  Data Encryption Limits  . . . . . . . . . . . . . . . . .   9
     4.3.  Content Integrity . . . . . . . . . . . . . . . . . . . .  10
     4.4.  Leaking Information in Headers  . . . . . . . . . . . . .  10
     4.5.  Poisoning Storage . . . . . . . . . . . . . . . . . . . .  11
     4.6.  Sizing and Timing Attacks . . . . . . . . . . . . . . . .  11
   5.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  11
     5.1.  The "aes128gcm" HTTP Content Coding . . . . . . . . . . .  11
   6.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  12
     6.1.  Normative References  . . . . . . . . . . . . . . . . . .  12
     6.2.  Informative References  . . . . . . . . . . . . . . . . .  12
   Appendix A.  JWE Mapping  . . . . . . . . . . . . . . . . . . . .  13
   Appendix B.  Acknowledgements . . . . . . . . . . . . . . . . . .  14
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .  14

1.  Introduction

   It is sometimes desirable to encrypt the contents of a HTTP message
   (request or response) so that when the payload is stored (e.g., with
   a HTTP PUT), only someone with the appropriate key can read it.

   For example, it might be necessary to store a file on a server
   without exposing its contents to that server.  Furthermore, that same
   file could be replicated to other servers (to make it more resistant
   to server or network failure), downloaded by clients (to make it
   available offline), etc.  without exposing its contents.

Thomson                   Expires June 25, 2017                 [Page 2]
Internet-Draft           HTTP encryption coding            December 2016

   These uses are not met by the use of TLS [RFC5246], since it only
   encrypts the channel between the client and server.

   This document specifies a content coding (Section 3.1.2 of [RFC7231])
   for HTTP to serve these and other use cases.

   This content coding is not a direct adaptation of message-based
   encryption formats - such as those that are described by [RFC4880],
   [RFC5652], [RFC7516], and [XMLENC] - which are not suited to stream
   processing, which is necessary for HTTP.  The format described here
   cleaves more closely to the lower level constructs described in
   [RFC5116].

   To the extent that message-based encryption formats use the same
   primitives, the format can be considered as sequence of encrypted
   messages with a particular profile.  For instance, Appendix A
   explains how the format is congruent with a sequence of JSON Web
   Encryption [RFC7516] values with a fixed header.

   This mechanism is likely only a small part of a larger design that
   uses content encryption.  How clients and servers acquire and
   identify keys will depend on the use case.  In particular, a key
   management system is not described.

1.1.  Notational Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   Base64url encoding is defined in Section 2 of [RFC7515].

2.  The "aes128gcm" HTTP Content Coding

   The "aes128gcm" HTTP content coding indicates that a payload has been
   encrypted using Advanced Encryption Standard (AES) in Galois/Counter
   Mode (GCM) as identified as AEAD_AES_128_GCM in [RFC5116],
   Section 5.1.  The AEAD_AES_128_GCM algorithm uses a 128 bit content
   encryption key.

   Using this content coding requires knowledge of a key.  How this key
   is acquired is not defined in this document.

   The "aes128gcm" content coding uses a single fixed set of encryption
   primitives.  Cipher suite agility is achieved by defining a new
   content coding scheme.  This ensures that only the HTTP Accept-
   Encoding header field is necessary to negotiate the use of
   encryption.

Thomson                   Expires June 25, 2017                 [Page 3]
Internet-Draft           HTTP encryption coding            December 2016

   The "aes128gcm" content coding uses a fixed record size.  The final
   encoding consists of a header (see Section 2.1), zero or more fixed
   size encrypted records, and a partial record.  The partial record
   MUST be shorter than the fixed record size.

   The record size determines the length of each portion of plaintext
   that is enciphered, with the exception of the final record, which is
   necessarily smaller.  The record size ("rs") is included in the
   content coding header (see Section 2.1).

         +-----------+       content of rs octets minus padding
         |   data    |       less padding (2-65537) and tag (16);
         +-----------+       the last record is smaller
              |
              v
   +-----+-----------+       add padding to get rs-16 octets;
   | pad |   data    |       the last record contains
   +-----+-----------+       up to rs minus 17 octets
            |
            v
   +--------------------+    encrypt with AEAD_AES_128_GCM;
   |    ciphertext      |    final size is rs;
   +--------------------+    the last record is smaller

   AEAD_AES_128_GCM produces ciphertext 16 octets longer than its input
   plaintext.  Therefore, the unencrypted content of each record is
   shorter than the record size by 16 octets.  If the final record ends
   on a record boundary, the encoder MUST append a record that contains
   contains only padding and is smaller than the full record size.  A
   receiver MUST fail to decrypt if the final record ciphertext is less
   than 18 octets in size or equal to the record size.  Valid records
   always contain at least a padding length of 2 octets and a 16 octet
   authentication tag.

   Each record contains a 2 octet padding length and between 0 and 65535
   octets of padding, inserted into a record before the content.  The
   padding length is a two octet unsigned integer in network byte order;
   padding is that number of zero-valued octets.  A receiver MUST fail
   to decrypt if any padding octet is non-zero, or a record has more
   padding than the record size can accommodate.

   The nonce for each record is a 96-bit value constructed from the
   record sequence number and the input keying material.  Nonce
   derivation is covered in Section 2.3.

   The additional data passed to each invocation of AEAD_AES_128_GCM is
   a zero-length octet sequence.

Thomson                   Expires June 25, 2017                 [Page 4]
Internet-Draft           HTTP encryption coding            December 2016

   A consequence of this record structure is that range requests
   [RFC7233] and random access to encrypted payload bodies are possible
   at the granularity of the record size.  Partial records at the ends
   of a range cannot be decrypted.  Thus, it is best if range requests
   start and end on record boundaries.  Note however that random access
   to specific parts of encrypted data could be confounded by the
   presence of padding.

   Selecting the record size most appropriate for a given situation
   requires a trade-off.  A smaller record size allows decrypted octets
   to be released more rapidly, which can be appropriate for
   applications that depend on responsiveness.  Smaller records also
   reduce the additional data required if random access into the
   ciphertext is needed.  Applications that depend on being able to pad
   by arbitrary amounts cannot increase the record size beyond 65537
   octets.

   Applications that don't depending on streaming, random access, or
   arbitrary padding can use larger records, or even a single record.  A
   larger record size reduces the processing and data overheads.

2.1.  Encryption Content Coding Header

   The content coding uses a header block that includes all parameters
   needed to decrypt the content (other than the key).  The header block
   is placed in the body of a message ahead of the sequence of records.

   +-----------+--------+-----------+---------------+
   | salt (16) | rs (4) | idlen (1) | keyid (idlen) |
   +-----------+--------+-----------+---------------+

   salt:  The "salt" parameter comprises the first 16 octets of the
      "aes128gcm" content coding header.  The same "salt" parameter
      value MUST NOT be reused for two different payload bodies that
      have the same input keying material; generating a random salt for
      every application of the content coding ensures that content
      encryption key reuse is highly unlikely.

   rs:  The "rs" or record size parameter contains an unsigned 32-bit
      integer in network byte order that describes the record size in
      octets.  Note that it is therefore impossible to exceed the
      2^36-31 limit on plaintext input to AEAD_AES_128_GCM.  Values
      smaller than 19 are invalid.

   keyid:  The "keyid" parameter can be used to identify the keying
      material that is used.  Recipients that receive a message are
      expected to know how to retrieve keys; the "keyid" parameter might

Thomson                   Expires June 25, 2017                 [Page 5]
Internet-Draft           HTTP encryption coding            December 2016

      be input to that process.  A "keyid" parameter SHOULD be a UTF-8
      [RFC3629] encoded string, particularly where the identifier might
      need to appear in a textual form.

2.2.  Content Encryption Key Derivation

   In order to allow the reuse of keying material for multiple different
   HTTP messages, a content encryption key is derived for each message.
   The content encryption key is derived from the "salt" parameter using
   the HMAC-based key derivation function (HKDF) described in [RFC5869]
   using the SHA-256 hash algorithm [FIPS180-4].

   The value of the "salt" parameter is the salt input to HKDF function.
   The keying material identified by the "keyid" parameter is the input
   keying material (IKM) to HKDF.  Input keying material is expected to
   be provided to recipients separately.  The extract phase of HKDF
   therefore produces a pseudorandom key (PRK) as follows:

      PRK = HMAC-SHA-256(salt, IKM)

   The info parameter to HKDF is set to the ASCII-encoded string
   "Content-Encoding: aes128gcm" and a single zero octet:

      cek_info = "Content-Encoding: aes128gcm" || 0x00

   Note:  Concatenation of octet sequences is represented by the "||"
      operator.

   AEAD_AES_128_GCM requires a 16 octet (128 bit) content encryption key
   (CEK), so the length (L) parameter to HKDF is 16.  The second step of
   HKDF can therefore be simplified to the first 16 octets of a single
   HMAC:

      CEK = HMAC-SHA-256(PRK, cek_info || 0x01)

2.3.  Nonce Derivation

   The nonce input to AEAD_AES_128_GCM is constructed for each record.
   The nonce for each record is a 12 octet (96 bit) value that is
   produced from the record sequence number and a value derived from the
   input keying material.

   The input keying material and salt values are input to HKDF with
   different info and length parameters.

Thomson                   Expires June 25, 2017                 [Page 6]
Internet-Draft           HTTP encryption coding            December 2016

   The length (L) parameter is 12 octets.  The info parameter for the
   nonce is the ASCII-encoded string "Content-Encoding: nonce",
   terminated by a a single zero octet:

      nonce_info = "Content-Encoding: nonce" || 0x00

   The result is combined with the record sequence number - using
   exclusive or - to produce the nonce.  The record sequence number
   (SEQ) is a 96-bit unsigned integer in network byte order that starts
   at zero.

   Thus, the final nonce for each record is a 12 octet value:

      NONCE = HMAC-SHA-256(PRK, nonce_info || 0x01) XOR SEQ

   This nonce construction prevents removal or reordering of records.
   However, it permits truncation of the tail of the sequence (see
   Section 2 for how this is avoided).

3.  Examples

   This section shows a few examples of the encrypted content coding.

   Note: All binary values in the examples in this section use base64url
   encoding [RFC7515].  This includes the bodies of requests.
   Whitespace and line wrapping is added to fit formatting constraints.

3.1.  Encryption of a Response

   Here, a successful HTTP GET response has been encrypted.  This uses a
   record size of 4096 and no padding (just the 2 octet padding length),
   so only a partial record is present.  The input keying material is
   identified by an empty string (that is, the "keyid" field in the
   header is zero octets in length).

   The encrypted data in this example is the UTF-8 encoded string "I am
   the walrus".  The input keying material is the value
   "B33e_VeFrOyIHwFTIfmesA" (in base64url).  The content body contains a
   single record and is shown here using base64url encoding for
   presentation reasons.

Thomson                   Expires June 25, 2017                 [Page 7]
Internet-Draft           HTTP encryption coding            December 2016

   HTTP/1.1 200 OK
   Content-Type: application/octet-stream
   Content-Length: 54
   Content-Encoding: aes128gcm

   sJvlboCWzB5jr8hI_q9cOQAAEAAANSmxkSVa0-MiNNuF77YHSs-iwaNe_OK0qfmO
   c7NT5WSW

   Note that the media type has been changed to "application/octet-
   stream" to avoid exposing information about the content.
   Alternatively (and equivalently), the Content-Type header field can
   be omitted.

   Intermediate values for this example (all shown in base64):

   salt (from header) = sJvlboCWzB5jr8hI_q9cOQ
   PRK = MLAQxt_DHjM15cdlyU1oUnjq7TFlzToGTkdRmvvxVBw
   CEK = v31u7VGV3soO3wNaMaIdhg
   NONCE = XOaygzko98zjUFTJ
   plaintext = AABJIGFtIHRoZSB3YWxydXM

3.2.  Encryption with Multiple Records

   This example shows the same message with input keying material of
   "BO3ZVPxUlnLORbVGMpbT1Q".  In this example, the plaintext is split
   into records of 26 octets each (that is, the "rs" field in the header
   is 26).  The first record includes a single octet of padding.  This
   means that there are 7 octets of message in the first record, and 8
   in the second.  This causes the end of the content to align with a
   record boundary, forcing the creation of a third record that contains
   only two octets of the padding length.

   HTTP/1.1 200 OK
   Content-Length: 93
   Content-Encoding: aes128gcm

   uNCkWiNYzKTnBN9ji3-qWAAAABoCYTGHOqYFz-0in3dpb-VE2GfBngkaPy6bZus_
   qLF79s6zQyTSsA0iLOKyd3JqVIwprNzVatRCWZGUx_qsFbJBCQu62RqQuR2d

4.  Security Considerations

   This mechanism assumes the presence of a key management framework
   that is used to manage the distribution of keys between valid senders
   and receivers.  Defining key management is part of composing this
   mechanism into a larger application, protocol, or framework.

Thomson                   Expires June 25, 2017                 [Page 8]
Internet-Draft           HTTP encryption coding            December 2016

   Implementation of cryptography - and key management in particular -
   can be difficult.  For instance, implementations need to account for
   the potential for exposing keying material on side channels, such as
   might be exposed by the time it takes to perform a given operation.
   The requirements for a good implementation of cryptographic
   algorithms can change over time.

4.1.  Key and Nonce Reuse

   Encrypting different plaintext with the same content encryption key
   and nonce in AES-GCM is not safe [RFC5116].  The scheme defined here
   uses a fixed progression of nonce values.  Thus, a new content
   encryption key is needed for every application of the content coding.
   Since input keying material can be reused, a unique "salt" parameter
   is needed to ensure a content encryption key is not reused.

   If a content encryption key is reused - that is, if input keying
   material and salt are reused - this could expose the plaintext and
   the authentication key, nullifying the protection offered by
   encryption.  Thus, if the same input keying material is reused, then
   the salt parameter MUST be unique each time.  This ensures that the
   content encryption key is not reused.  An implementation SHOULD
   generate a random salt parameter for every message; a counter could
   achieve the same result.

4.2.  Data Encryption Limits

   There are limits to the data that AEAD_AES_128_GCM can encipher.  The
   maximum value for the record size is limited by the size of the "rs"
   field in the header (see Section 2.1), which ensures that the 2^36-31
   limit for a single application of AEAD_AES_128_GCM is not reached
   [RFC5116].  In order to preserve a 2^-40 probability of
   indistinguishability under chosen plaintext attack (IND-CPA), the
   total amount of plaintext that can be enciphered MUST be less than
   2^44.5 blocks of 16 octets [AEBounds].

   If the record size is a multiple of 16 octets, this means 398
   terabytes can be encrypted safely, including padding and overhead.
   However, if the record size is not a multiple of 16 octets, the total
   amount of data that can be safely encrypted is reduced because
   partial AES blocks are encrypted.  The worst case is a record size of
   19 octets, for which at most 74 terabytes of plaintext can be
   encrypted, of which at least two-thirds is padding.

Thomson                   Expires June 25, 2017                 [Page 9]
Internet-Draft           HTTP encryption coding            December 2016

4.3.  Content Integrity

   This mechanism only provides content origin authentication.  The
   authentication tag only ensures that an entity with access to the
   content encryption key produced the encrypted data.

   Any entity with the content encryption key can therefore produce
   content that will be accepted as valid.  This includes all recipients
   of the same HTTP message.

   Furthermore, any entity that is able to modify both the Encryption
   header field and the HTTP message body can replace the contents.
   Without the content encryption key or the input keying material,
   modifications to or replacement of parts of a payload body are not
   possible.

4.4.  Leaking Information in Headers

   Because only the payload body is encrypted, information exposed in
   header fields is visible to anyone who can read the HTTP message.
   This could expose side-channel information.

   For example, the Content-Type header field can leak information about
   the payload body.

   There are a number of strategies available to mitigate this threat,
   depending upon the application's threat model and the users'
   tolerance for leaked information:

   1.  Determine that it is not an issue.  For example, if it is
       expected that all content stored will be "application/json", or
       another very common media type, exposing the Content-Type header
       field could be an acceptable risk.

   2.  If it is considered sensitive information and it is possible to
       determine it through other means (e.g., out of band, using hints
       in other representations, etc.), omit the relevant headers, and/
       or normalize them.  In the case of Content-Type, this could be
       accomplished by always sending Content-Type: application/octet-
       stream (the most generic media type), or no Content-Type at all.

   3.  If it is considered sensitive information and it is not possible
       to convey it elsewhere, encapsulate the HTTP message using the
       application/http media type (Section 8.3.2 of [RFC7230]),
       encrypting that as the payload of the "outer" message.

Thomson                   Expires June 25, 2017                [Page 10]
Internet-Draft           HTTP encryption coding            December 2016

4.5.  Poisoning Storage

   This mechanism only offers encryption of content; it does not perform
   authentication or authorization, which still needs to be performed
   (e.g., by HTTP authentication [RFC7235]).

   This is especially relevant when a HTTP PUT request is accepted by a
   server; if the request is unauthenticated, it becomes possible for a
   third party to deny service and/or poison the store.

4.6.  Sizing and Timing Attacks

   Applications using this mechanism need to be aware that the size of
   encrypted messages, as well as their timing, HTTP methods, URIs and
   so on, may leak sensitive information.

   This risk can be mitigated through the use of the padding that this
   mechanism provides.  Alternatively, splitting up content into
   segments and storing the separately might reduce exposure.  HTTP/2
   [RFC7540] combined with TLS [RFC5246] might be used to hide the size
   of individual messages.

   Developing a padding strategy is difficult.  A good padding strategy
   can depend on context.  Common strategies include padding to a small
   set of fixed lengths, padding to multiples of a values, or padding to
   powers of 2.  Even a good strategy can still cause size information
   to leak if processing activity of a recipient can be observed.  This
   is especially true if the trailing records of a message contain only
   padding.  Distributing non-padding data is recommended to avoid
   leaking size information.

5.  IANA Considerations

5.1.  The "aes128gcm" HTTP Content Coding

   This memo registers the "aes128gcm" HTTP content coding in the HTTP
   Content Codings Registry, as detailed in Section 2.

   o  Name: aes128gcm

   o  Description: AES-GCM encryption with a 128-bit content encryption
      key

   o  Reference: this specification

Thomson                   Expires June 25, 2017                [Page 11]
Internet-Draft           HTTP encryption coding            December 2016

6.  References

6.1.  Normative References

   [FIPS180-4]
              Department of Commerce, National., "NIST FIPS 180-4,
              Secure Hash Standard", March 2012,
              <http://csrc.nist.gov/publications/fips/fips180-4/
              fips-180-4.pdf>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <http://www.rfc-editor.org/info/rfc2119>.

   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, DOI 10.17487/RFC3629, November
              2003, <http://www.rfc-editor.org/info/rfc3629>.

   [RFC5116]  McGrew, D., "An Interface and Algorithms for Authenticated
              Encryption", RFC 5116, DOI 10.17487/RFC5116, January 2008,
              <http://www.rfc-editor.org/info/rfc5116>.

   [RFC5869]  Krawczyk, H. and P. Eronen, "HMAC-based Extract-and-Expand
              Key Derivation Function (HKDF)", RFC 5869,
              DOI 10.17487/RFC5869, May 2010,
              <http://www.rfc-editor.org/info/rfc5869>.

   [RFC7230]  Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
              Protocol (HTTP/1.1): Message Syntax and Routing",
              RFC 7230, DOI 10.17487/RFC7230, June 2014,
              <http://www.rfc-editor.org/info/rfc7230>.

   [RFC7231]  Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
              Protocol (HTTP/1.1): Semantics and Content", RFC 7231,
              DOI 10.17487/RFC7231, June 2014,
              <http://www.rfc-editor.org/info/rfc7231>.

   [RFC7515]  Jones, M., Bradley, J., and N. Sakimura, "JSON Web
              Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, May
              2015, <http://www.rfc-editor.org/info/rfc7515>.

6.2.  Informative References

   [AEBounds]
              Luykx, A. and K. Paterson, "Limits on Authenticated
              Encryption Use in TLS", March 2016,
              <http://www.isg.rhul.ac.uk/~kp/TLS-AEbounds.pdf>.

Thomson                   Expires June 25, 2017                [Page 12]
Internet-Draft           HTTP encryption coding            December 2016

   [RFC4880]  Callas, J., Donnerhacke, L., Finney, H., Shaw, D., and R.
              Thayer, "OpenPGP Message Format", RFC 4880,
              DOI 10.17487/RFC4880, November 2007,
              <http://www.rfc-editor.org/info/rfc4880>.

   [RFC5246]  Dierks, T. and E. Rescorla, "The Transport Layer Security
              (TLS) Protocol Version 1.2", RFC 5246,
              DOI 10.17487/RFC5246, August 2008,
              <http://www.rfc-editor.org/info/rfc5246>.

   [RFC5652]  Housley, R., "Cryptographic Message Syntax (CMS)", STD 70,
              RFC 5652, DOI 10.17487/RFC5652, September 2009,
              <http://www.rfc-editor.org/info/rfc5652>.

   [RFC7233]  Fielding, R., Ed., Lafon, Y., Ed., and J. Reschke, Ed.,
              "Hypertext Transfer Protocol (HTTP/1.1): Range Requests",
              RFC 7233, DOI 10.17487/RFC7233, June 2014,
              <http://www.rfc-editor.org/info/rfc7233>.

   [RFC7235]  Fielding, R., Ed. and J. Reschke, Ed., "Hypertext Transfer
              Protocol (HTTP/1.1): Authentication", RFC 7235,
              DOI 10.17487/RFC7235, June 2014,
              <http://www.rfc-editor.org/info/rfc7235>.

   [RFC7516]  Jones, M. and J. Hildebrand, "JSON Web Encryption (JWE)",
              RFC 7516, DOI 10.17487/RFC7516, May 2015,
              <http://www.rfc-editor.org/info/rfc7516>.

   [RFC7540]  Belshe, M., Peon, R., and M. Thomson, Ed., "Hypertext
              Transfer Protocol Version 2 (HTTP/2)", RFC 7540,
              DOI 10.17487/RFC7540, May 2015,
              <http://www.rfc-editor.org/info/rfc7540>.

   [XMLENC]   Eastlake, D., Reagle, J., Hirsch, F., Roessler, T.,
              Imamura, T., Dillaway, B., Simon, E., Yiu, K., and M.
              Nystroem, "XML Encryption Syntax and Processing", W3C
              Recommendation REC-xmlenc-core1-20130411 , January 2013,
              <https://www.w3.org/TR/2013/REC-xmlenc-core1-20130411>.

Appendix A.  JWE Mapping

   The "aes128gcm" content coding can be considered as a sequence of
   JSON Web Encryption (JWE) objects [RFC7516], each corresponding to a
   single fixed size record that includes leading padding.  The
   following transformations are applied to a JWE object that might be
   expressed using the JWE Compact Serialization:

Thomson                   Expires June 25, 2017                [Page 13]
Internet-Draft           HTTP encryption coding            December 2016

   o  The JWE Protected Header is fixed to the value { "alg": "dir",
      "enc": "A128GCM" }, describing direct encryption using AES-GCM
      with a 128-bit content encryption key.  This header is not
      transmitted, it is instead implied by the value of the Content-
      Encoding header field.

   o  The JWE Encrypted Key is empty, as stipulated by the direct
      encryption algorithm.

   o  The JWE Initialization Vector ("iv") for each record is set to the
      exclusive or of the 96-bit record sequence number, starting at
      zero, and a value derived from the input keying material (see
      Section 2.3).  This value is also not transmitted.

   o  The final value is the concatenated header, JWE Ciphertext, and
      JWE Authentication Tag, all expressed without base64url encoding.
      The "." separator is omitted, since the length of these fields is
      known.

   Thus, the example in Section 3.1 can be rendered using the JWE
   Compact Serialization as:

   eyAiYWxnIjogImRpciIsICJlbmMiOiAiQTEyOEdDTSIgfQ..31iQYc1v4a36EgyJ.
   NSmxkSVa0-MiNNuF77YHSs8.osGjXvzitKn5jnOzU-Vklg

   Where the first line represents the fixed JWE Protected Header, an
   empty JWE Encrypted Key, and the algorithmically-determined JWE
   Initialization Vector.  The second line contains the encoded body,
   split into JWE Ciphertext and JWE Authentication Tag.

Appendix B.  Acknowledgements

   Mark Nottingham was an original author of this document.

   The following people provided valuable input: Richard Barnes, David
   Benjamin, Peter Beverloo, JR Conlin, Mike Jones, Stephen Farrell,
   Adam Langley, John Mattsson, Julian Reschke, Eric Rescorla, Jim
   Schaad, and Magnus Westerlund.

Author's Address

   Martin Thomson
   Mozilla

   Email: martin.thomson@gmail.com

Thomson                   Expires June 25, 2017                [Page 14]