The IESG has approved the Internet-Draft 'Power Ethernet MIB'
<draft-ietf-hubmib-power-ethernet-mib-08.txt> as a Proposed Standard.
This document is the product of the Ethernet Interfaces and Hub MIB
Working Group. The IESG contact persons are Randy Bush and Bert Wijnen.
Technical Summary
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community.
The document proposes an extension to the Ethernet-like Interfaces
MIB with a set of objects for managing a Power Source Equipment (PSE).
Working Group Summary
There is Working Group Consensus to publish the above document as a
Proposed Standard.
Protocol Quality
This document has been reviewed for the IESG by Bert Wijnen and
Mike Heard.
RFC-Editor Notes:
- on page 5, pls fix a typo
missing "of" in "characteristics of power Ethernet ports"?
OLD
pethPsePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PethPsePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that display and control the power
characteristics power Ethernet ports on a Power Source
NEW:
pethPsePortTable OBJECT-TYPE
SYNTAX SEQUENCE OF PethPsePortEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A table of objects that display and control the power
characteristics of power Ethernet ports on a Power Source
- on page 7, fix typo
should be PethPsePortAdminEnable
OLD:
pethPsePortPowerPairsControlAbility OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the capability of controlling the power pairs
functionality to switch pins for sourcing power.
The value true indicate that the device has the capability
to control the power pairs. When false the PSE Pinout
Alternative used cannot be controlled through the
PethPsePortAdminEnabe attribute."
NEW:
pethPsePortPowerPairsControlAbility OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Describes the capability of controlling the power pairs
functionality to switch pins for sourcing power.
The value true indicate that the device has the capability
to control the power pairs. When false the PSE Pinout
Alternative used cannot be controlled through the
PethPsePortAdminEnable attribute."
- On page 7, fix typo
menas should be means
OLD:
pethPsePortPowerPairs OBJECT-TYPE
SYNTAX INTEGER {
signal(1),
spare(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describes or controls the pairs in use. If the value of
pethPsePortPowerPairsControl is true, this object is
writable.
A value of signal(1) menas that the signal pairs
NEW:
pethPsePortPowerPairs OBJECT-TYPE
SYNTAX INTEGER {
signal(1),
spare(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Describes or controls the pairs in use. If the value of
pethPsePortPowerPairsControl is true, this object is
writable.
A value of signal(1) means that the signal pairs