IPv6 Updates for IPPM's Active Metric Framework
draft-ietf-ippm-2330-ipv6-01

The information below is for an old version of the document
Document Type Expired Internet-Draft (ippm WG)
Last updated 2017-09-07 (latest revision 2017-03-06)
Replaces draft-morton-ippm-2330-stdform-typep
Stream IETF
Intended RFC status (None)
Formats
Expired & archived
plain text pdf html bibtex
Stream WG state WG Document
Document shepherd No shepherd assigned
IESG IESG state Expired
Consensus Boilerplate Unknown
Telechat date
Responsible AD (None)
Send notices to (None)

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at
https://www.ietf.org/archive/id/draft-ietf-ippm-2330-ipv6-01.txt

Abstract

This memo updates the IP Performance Metrics (IPPM) Framework RFC 2330 with new considerations for measurement methodology and testing. It updates the definition of standard-formed packets in RFC 2330 to include IPv6 packets and augments distinguishing aspects of packets, referred to as Type-P for test packets in RFC 2330. This memo identifies that IPv4-IPv6 co-existence can challenge measurements within the scope of the IPPM Framework. Exemplary use cases include, but are not limited to IPv4-IPv6 translation, NAT, protocol encapsulation, or IPv6 header compression.

Authors

Al Morton (acmorton@att.com)
Joachim Fabini (joachim.fabini@tuwien.ac.at)
Nalini Elkins (nalini.elkins@insidethestack.com)
mackermann@bcbsm.com (mackermann@bcbsm.com)
Vinayak Hegde (vinayakh@gmail.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)