Simple Two-Way Active Measurement Protocol (STAMP) Extensions for Segment Routing Networks
draft-ietf-ippm-stamp-srpm-18

Approval announcement
Draft of message to be sent after approval:

Announcement

From: The IESG <iesg-secretary@ietf.org>
To: IETF-Announce <ietf-announce@ietf.org>
Cc: The IESG <iesg@ietf.org>, draft-ietf-ippm-stamp-srpm@ietf.org, ippm-chairs@ietf.org, ippm@ietf.org, martin.h.duke@gmail.com, rfc-editor@rfc-editor.org, tpauly@apple.com
Subject: Protocol Action: 'Simple TWAMP (STAMP) Extensions for Segment Routing Networks' to Proposed Standard (draft-ietf-ippm-stamp-srpm-18.txt)

The IESG has approved the following document:
- 'Simple TWAMP (STAMP) Extensions for Segment Routing Networks'
  (draft-ietf-ippm-stamp-srpm-18.txt) as Proposed Standard

This document is the product of the IP Performance Measurement Working Group.

The IESG contact persons are Zaheduzzaman Sarker and Martin Duke.

A URL of this Internet-Draft is:
https://datatracker.ietf.org/doc/draft-ietf-ippm-stamp-srpm/

Ballot Text

Technical Summary

   Segment Routing (SR) leverages the source routing paradigm.  SR is
   applicable to both Multiprotocol Label Switching (SR-MPLS) and IPv6
   (SRv6) forwarding planes.  This document specifies RFC 8762 (Simple
   Two-Way Active Measurement Protocol (STAMP)) extensions for SR
   networks, for both SR-MPLS and SRv6 forwarding planes by augmenting
   the optional extensions defined in RFC 8972.

Working Group Summary

   Throughout the process on the document, from adoption, there was a lot of discussion
between the authors and one of the area experts in the group (Greg Mirsky), about making
sure that many aspects of the proposal fit into the existing STAMP architecture.

Document Quality

there are several implementations (at least amongst the authors) who will be using this, and this is being tracked by the SPRING WG.

Personnel

   The Document Shepherd for this document is Tommy Pauly. The Responsible
   Area Director is Martin Duke.

RFC Editor Note