Technical Summary
This document defines a sub-TLV called "Link-attributes" carried
within the extended IS reachability TLV and used to flood some
link characteristics.
Working Group Summary
The Working Group had consensus to advance this document.
Protocol Quality
Alex Zinin and Bill Fenner reviewed this spec for the IESG.
Note to RFC Editor
In section 2, please replace
OLD:
This sub-TLV is OPTIONAL and MAY appear at most once for a single IS
neighbor. If a received LSP contains more than one Link-Attribute
Sub-TLV, an implementation MAY decide to consider only the first
encountered instance.
NEW:
This sub-TLV is OPTIONAL and MUST appear at most once for a single IS
neighbor. If a received LSP contains more than one Link-Attribute
Sub-TLV, an implementation SHOULD decide to consider only the first
encountered instance.
In section 3, please replace
OLD:
A router not supporting the link-attribute sub-TLV MUST just
silently ignore this sub-TLV.
NEW:
A router not supporting the link-attribute sub-TLV will just
silently ignore this sub-TLV.
Section 2, second paragraph, replace:
OLD:
The Link-attribute sub-type is 19 (to be assigned by IANA) and has a
length of 2 octets.
NEW:
The Link-attribute sub-type is 19 (to be assigned by IANA) and the
link attribute has a length of 2 octets.
Section 2, third paragraph, replace:
OLD:
If a received LSP contains...
NEW:
If a received Link State Packet (LSP) contains...