Skip to main content

Building Power-Efficient CoAP Devices for Cellular Networks
draft-ietf-lwig-cellular-03

The information below is for an old version of the document.
Document Type Expired Internet-Draft (lwig WG)
Authors Jari Arkko , Anders Eriksson , Ari Keränen
Last updated 2015-04-30 (Latest revision 2014-10-27)
Stream Internet Engineering Task Force (IETF)
Formats
Expired & archived
plain text htmlized pdfized bibtex
Reviews
Stream WG state WG Consensus: Waiting for Write-Up
Document shepherd Robert Cragie
IESG IESG state Expired
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to "Robert Cragie" <robert.cragie@gridmerge.com>
This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at:
https://www.ietf.org/archive/id/draft-ietf-lwig-cellular-03.txt

Abstract

This memo discusses the use of the Constrained Application Protocol (CoAP) protocol in building sensors and other devices that employ cellular networks as a communications medium. Building communicating devices that employ these networks is obviously well known, but this memo focuses specifically on techniques necessary to minimize power consumption.

Authors

Jari Arkko
Anders Eriksson
Ari Keränen

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)