BFD for Multipoint Networks over Point-to-Multi-Point MPLS LSP
draft-ietf-mpls-p2mp-bfd-01
Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Active".
Expired & archived
|
|
---|---|---|---|
Authors | Greg Mirsky , Gyan Mishra , Donald E. Eastlake 3rd | ||
Last updated | 2022-08-14 (Latest revision 2022-02-10) | ||
Replaces | draft-mirsky-mpls-p2mp-bfd | ||
RFC stream | Internet Engineering Task Force (IETF) | ||
Formats | |||
Reviews | |||
Additional resources | Mailing list discussion | ||
Stream | WG state | WG Document | |
Document shepherd | (None) | ||
IESG | IESG state | Expired | |
Consensus boilerplate | Unknown | ||
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes procedures for using Bidirectional Forwarding Detection (BFD) for multipoint networks to detect data plane failures in Multiprotocol Label Switching (MPLS) point-to-multipoint (p2mp) Label Switched Paths (LSPs) and Segment Routing (SR) point-to- multipoint policies with SR-MPLS data plane. It also describes the applicability of LSP Ping, as in-band, and the control plane, as out-band, solutions to bootstrap a BFD session. It also describes the behavior of the active tail for head notification.
Authors
Greg Mirsky
Gyan Mishra
Donald E. Eastlake 3rd
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)