%% You should probably cite draft-ietf-mpls-p2mp-bfd-11 instead of this revision.
@techreport{ietf-mpls-p2mp-bfd-09,
    number =    {draft-ietf-mpls-p2mp-bfd-09},
    type =      {Internet-Draft},
    institution =   {Internet Engineering Task Force},
    publisher = {Internet Engineering Task Force},
    note =      {Work in Progress},
    url =       {https://datatracker.ietf.org/doc/draft-ietf-mpls-p2mp-bfd/09/},
    author =    {Greg Mirsky and Gyan Mishra and Donald E. Eastlake 3rd},
    title =     {{Bidirectional Forwarding Detection (BFD) for Multipoint Networks over Point-to-Multi-Point MPLS Label Switched Path (LSP)}},
    pagetotal = 12,
    year =      2025,
    month =     jan,
    day =       6,
    abstract =  {This document describes procedures for using Bidirectional Forwarding Detection (BFD) for multipoint networks to detect data plane failures in Multiprotocol Label Switching (MPLS) point-to-multipoint Label Switched Paths (LSPs) and Segment Routing (SR) point-to-multipoint policies with SR over MPLS data plane. Furthermore, this document also updates RFC 8562 and recommends the use of an IPv6 loopback address (::1/128) and discourages the use of an IPv4 loopback address mapped to IPv6. It also describes the applicability of LSP Ping, as in-band, and the control plane, as out-band, solutions to bootstrap a BFD session. It also describes the behavior of the active tail for head notification.},
}