%% You should probably cite draft-ietf-mpls-stamp-pw-21 instead of this revision.
@techreport{ietf-mpls-stamp-pw-15,
    number =    {draft-ietf-mpls-stamp-pw-15},
    type =      {Internet-Draft},
    institution =   {Internet Engineering Task Force},
    publisher = {Internet Engineering Task Force},
    note =      {Work in Progress},
    url =       {https://datatracker.ietf.org/doc/draft-ietf-mpls-stamp-pw/15/},
    author =    {Rakesh Gandhi and Patrice Brissette and Eddie Leyton and Xiao Min},
    title =     {{Encapsulation of Simple Two-Way Active Measurement Protocol for LSPs and Pseudowires in MPLS Networks}},
    pagetotal = 36,
    year =      2026,
    month =     aug,
    day =       31,
    abstract =  {This document specifies encapsulations for the Simple Two-Way Active Measurement Protocol (STAMP), defined in RFC 8762, and its optional extensions, defined in RFC 8972, in MPLS networks. It specifies the encapsulation of STAMP test packets for point-to-point Label Switched Paths (LSPs) and point-to-point single-segment Pseudowires (PWs), with or without an IP/UDP header, so that the test packets experience the same forwarding and Equal-Cost Multi-Path (ECMP) behavior as the data traffic being measured. In addition, two new MPLS Generic Associated Channel (G-ACh) types are defined. This document updates RFC 8762 for TTL and IPv6 Hop Limit processing and RFC 8972 for the STAMP Session Identifier for LSPs and PWs.},
}