Indication of Client Failure in MPLS-TP
draft-ietf-mpls-tp-csf-02
| Document | Type | Expired Internet-Draft (mpls WG) | |
|---|---|---|---|
| Authors | Elisa Bellagamba , Han Li , He Jia | ||
| Last updated | 2012-03-26 (latest revision 2011-09-13) | ||
| Replaces | draft-he-mpls-tp-csf | ||
| Stream | Internent Engineering Task Force (IETF) | ||
| Intended RFC status | (None) | ||
| Formats |
Expired & archived
pdf
htmlized (tools)
htmlized
bibtex
|
||
| Stream | WG state | WG Document | |
| Document shepherd | No shepherd assigned | ||
| IESG | IESG state | Expired | |
| Consensus Boilerplate | Unknown | ||
| Telechat date | |||
| Responsible AD | (None) | ||
| Send notices to | (None) | ||
https://www.ietf.org/archive/id/draft-ietf-mpls-tp-csf-02.txt
Abstract
This document describes a Multi-Protocol Label Switching Transport Profile (MPLS-TP) Operations, Administration and Maintenance (OAM) protocol to propagate a client failure indication across an MPLS-TP network in the case that propagation of failure status in the client layer is not supported as required in [RFC5860].
Authors
Elisa Bellagamba
(elisa.bellagamba@ericsson.com)
Han Li
(lihan@chinamobile.com)
He Jia
(hejia@huawei.com)
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)