Indication of Client Failure in MPLS-TP
draft-ietf-mpls-tp-csf-02
| Document | Type |
Expired Internet-Draft
(mpls WG)
Expired & archived
|
|
|---|---|---|---|
| Authors | Elisa Bellagamba , Han Li , He Jia | ||
| Last updated | 2012-03-26 (Latest revision 2011-09-13) | ||
| Replaces | draft-he-mpls-tp-csf | ||
| RFC stream | Internet Engineering Task Force (IETF) | ||
| Formats | |||
| Additional resources | Mailing list discussion | ||
| Stream | WG state | WG Document | |
| Document shepherd | (None) | ||
| IESG | IESG state | Expired | |
| Consensus boilerplate | Unknown | ||
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes a Multi-Protocol Label Switching Transport Profile (MPLS-TP) Operations, Administration and Maintenance (OAM) protocol to propagate a client failure indication across an MPLS-TP network in the case that propagation of failure status in the client layer is not supported as required in [RFC5860].
Authors
Elisa Bellagamba
Han Li
He Jia
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)