Conveying a Certificate Signing Request (CSR) in a Secure Zero Touch Provisioning (SZTP) Bootstrapping Request
draft-ietf-netconf-sztp-csr-12
The information below is for an old version of the document.
| Document | Type | Active Internet-Draft (netconf WG) | |
|---|---|---|---|
| Authors | Kent Watsen , Russ Housley , Sean Turner | ||
| Last updated | 2021-12-16 (Latest revision 2021-12-03) | ||
| Replaces | draft-kwatsen-netconf-sztp-csr | ||
| Stream | Internet Engineering Task Force (IETF) | ||
| Formats | plain text html xml htmlized pdfized bibtex | ||
| Reviews |
SECDIR Telechat review
Ready
SECDIR Last Call review
(of
-11)
Has Issues
GENART Last Call review
(of
-11)
Ready with Nits
YANGDOCTORS Last Call review
(of
-02)
Ready with Nits
|
||
| Stream | WG state | Submitted to IESG for Publication | |
| Document shepherd | Mahesh Jethanandani | ||
| Shepherd write-up | Show Last changed 2021-06-02 | ||
| IESG | IESG state | IESG Evaluation::Revised I-D Needed | |
| Consensus boilerplate | Yes | ||
| Telechat date |
(None)
Has enough positions to pass. |
||
| Responsible AD | Robert Wilton | ||
| Send notices to | mjethanandani@gmail.com | ||
| IANA | IANA review state | IANA OK - Actions Needed | |
| IANA expert review state | Expert Reviews OK |
draft-ietf-netconf-sztp-csr-12
NETCONF Working Group K. Watsen
Internet-Draft Watsen Networks
Updates: 8572 (if approved) R. Housley
Intended status: Standards Track Vigil Security, LLC
Expires: 6 June 2022 S. Turner
sn3rd
3 December 2021
Conveying a Certificate Signing Request (CSR) in a Secure Zero Touch
Provisioning (SZTP) Bootstrapping Request
draft-ietf-netconf-sztp-csr-12
Abstract
This draft extends the "get-bootstrapping-data" RPC defined in RFC
8572 to include an optional certificate signing request (CSR),
enabling a bootstrapping device to additionally obtain an identity
certificate (e.g., an LDevID from IEEE 802.1AR) as part of the
"onboarding information" response provided in the RPC-reply.
Editorial Note (To be removed by RFC Editor)
This draft contains many placeholder values that need to be replaced
with finalized values at the time of publication. This note
summarizes all of the substitutions that are needed. No other RFC
Editor instructions are specified elsewhere in this document.
Artwork in this document contains shorthand references to drafts in
progress. Please apply the following replacements:
* XXXX --> the assigned numerical RFC value for this draft
* AAAA --> the assigned RFC value for I-D.ietf-netconf-crypto-types
Artwork in this document contains a placeholder value for the
publication date of this draft. Please apply the following
replacement:
* 2021-12-03 --> the publication date of this draft
This document contains references to other drafts in progress, both
in the Normative References section, as well as in body text
throughout. Please update the following references to reflect their
final RFC assignments:
* I-D.ietf-netconf-crypto-types
Watsen, et al. Expires 6 June 2022 [Page 1]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
* I-D.ietf-netconf-keystore
* I-D.ietf-netconf-trust-anchors
* I-D.ietf-netmod-factory-default
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on 6 June 2022.
Copyright Notice
Copyright (c) 2021 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents (https://trustee.ietf.org/
license-info) in effect on the date of publication of this document.
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document. Code Components
extracted from this document must include Revised BSD License text as
described in Section 4.e of the Trust Legal Provisions and are
provided without warranty as described in the Revised BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2. Terminology . . . . . . . . . . . . . . . . . . . . . . . 4
1.3. Requirements Language . . . . . . . . . . . . . . . . . . 4
1.4. Conventions . . . . . . . . . . . . . . . . . . . . . . . 4
2. The "ietf-sztp-csr" Module . . . . . . . . . . . . . . . . . 4
2.1. Data Model Overview . . . . . . . . . . . . . . . . . . . 5
2.2. Example Usage . . . . . . . . . . . . . . . . . . . . . . 8
2.3. YANG Module . . . . . . . . . . . . . . . . . . . . . . . 14
Watsen, et al. Expires 6 June 2022 [Page 2]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
3. The "ietf-ztp-types" Module . . . . . . . . . . . . . . . . . 17
3.1. Data Model Overview . . . . . . . . . . . . . . . . . . . 17
3.2. YANG Module . . . . . . . . . . . . . . . . . . . . . . . 18
4. Security Considerations . . . . . . . . . . . . . . . . . . . 27
4.1. SZTP-Client Considerations . . . . . . . . . . . . . . . 27
4.1.1. Ensuring the Integrity of Asymmetric Private Keys . . 27
4.1.2. Reuse of a Manufacturer-generated Private Key . . . . 28
4.1.3. Replay Attack Protection . . . . . . . . . . . . . . 28
4.1.4. Connecting to an Untrusted Bootstrap Server . . . . . 29
4.1.5. Selecting the Best Origin Authentication Mechanism . 29
4.1.6. Clearing the Private Key and Associated
Certificate . . . . . . . . . . . . . . . . . . . . . 30
4.2. SZTP-Server Considerations . . . . . . . . . . . . . . . 30
4.2.1. Verifying Proof of Possession . . . . . . . . . . . . 30
4.2.2. Verifying Proof of Origin . . . . . . . . . . . . . . 30
4.2.3. Supporting SZTP-Clients that don't trust the
SZTP-Server . . . . . . . . . . . . . . . . . . . . . 31
4.3. Security Considerations for the "ietf-sztp-csr" YANG
Module . . . . . . . . . . . . . . . . . . . . . . . . . 31
4.4. Security Considerations for the "ietf-ztp-types" YANG
Module . . . . . . . . . . . . . . . . . . . . . . . . . 31
5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 31
5.1. The "IETF XML" Registry . . . . . . . . . . . . . . . . . 31
5.2. The "YANG Module Names" Registry . . . . . . . . . . . . 32
6. References . . . . . . . . . . . . . . . . . . . . . . . . . 32
6.1. Normative References . . . . . . . . . . . . . . . . . . 32
6.2. Informative References . . . . . . . . . . . . . . . . . 33
Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 35
Contributors . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 35
1. Introduction
1.1. Overview
This draft extends the "get-bootstrapping-data" RPC defined in
[RFC8572] to include an optional certificate signing request (CSR)
[RFC2986], enabling a bootstrapping device to additionally obtain an
identity certificate (e.g., an LDevID [Std-802.1AR-2018]) as part of
the "onboarding information" response provided in the RPC-reply.
The ability to provision an identity certificate that is purpose-
built for a production environment during the bootstrapping process
removes reliance on the manufacturer CA, and it also enables the
bootstrapped device to join the production environment with an
appropriate identity and other attributes in its identity certificate
(e.g., an LDevID).
Watsen, et al. Expires 6 June 2022 [Page 3]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
Two YANG [RFC7950] modules are defined. The "ietf-ztp-types" module
defines three YANG groupings for the various messages defined in this
document. The "ietf-sztp-csr" module augments two groupings into the
"get-bootstrapping-data" RPC and defines a YANG Data Structure
[RFC8791] around the third grouping.
1.2. Terminology
This document uses the following terms from [RFC8572]:
* Bootstrap Server
* Bootstrapping Data
* Conveyed Information
* Device
* Manufacturer
* Onboarding Information
* Signed Data
This document defines the following new terms:
SZTP-client The term "SZTP-client" refers to a "device" that is
using a "bootstrap server" as a source of "bootstrapping data".
SZTP-server The term "SZTP-server" is an alternative term for
"bootstrap server" that is symmetric with the "SZTP-client" term.
1.3. Requirements Language
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
1.4. Conventions
Various examples used in this document use a placeholder value for
binary data that has been base64 encoded (e.g., "BASE64VALUE=").
This placeholder value is used as real base64 encoded structures are
often many lines long and hence distracting to the example being
presented.
2. The "ietf-sztp-csr" Module
The "ietf-sztp-csr" module is a YANG 1.1 [RFC7950] module that
augments the "ietf-sztp-bootstrap-server" module defined in [RFC8572]
and defines a YANG "structure" that is to be conveyed in the "error-
info" node defined in Section 7.1 of [RFC8040].
Watsen, et al. Expires 6 June 2022 [Page 4]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
2.1. Data Model Overview
The following tree diagram [RFC8340] illustrates the "ietf-sztp-csr"
module.
module: ietf-sztp-csr
augment /sztp-svr:get-bootstrapping-data/sztp-svr:input:
+---w (msg-type)?
+--:(csr-support)
| +---w csr-support
| +---w key-generation!
| | +---w supported-algorithms
| | +---w algorithm-identifier* binary
| +---w csr-generation
| +---w supported-formats
| +---w format-identifier* identityref
+--:(csr)
+---w (csr-type)
+--:(p10-csr)
| +---w p10-csr? ct:csr
+--:(cmc-csr)
| +---w cmc-csr? binary
+--:(cmp-csr)
+---w cmp-csr? binary
module: ietf-sztp-csr
structure: csr-request
+--ro key-generation!
| +--ro selected-algorithm
| +--ro algorithm-identifier binary
+--ro csr-generation
| +--ro selected-format
| +--ro format-identifier identityref
+--ro cert-req-info? ct:csr-info
augment /sztp-svr:get-bootstrapping-data/sztp-svr:input:
+---w (msg-type)?
+--:(csr-support)
| +---w csr-support
| +---w key-generation!
| | +---w supported-algorithms
| | +---w algorithm-identifier* binary
| +---w csr-generation
| +---w supported-formats
| +---w format-identifier* identityref
+--:(csr)
+---w (csr-type)
Watsen, et al. Expires 6 June 2022 [Page 5]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
+--:(p10-csr)
| +---w p10-csr? ct:csr
+--:(cmc-csr)
| +---w cmc-csr? binary
+--:(cmp-csr)
+---w cmp-csr? binary
The augmentation defines two kinds of parameters that an SZTP-client
can send to an SZTP-server. The YANG structure defines one
collection of parameters that an SZTP-server can send to an SZTP-
client.
In the order of their intended use:
* The "csr-support" node is used by the SZTP-client to signal to the
SZTP-server that it supports the ability the generate CSRs. This
parameter conveys if the SZTP-client is able to generate an new
asymmetric key and, if so, which key algorithms it supports, as
well as conveys what kinds of CSR structures the SZTP-client is
able to generate.
* The "csr-request" structure is used by the SZTP-server to request
the SZTP-client to generate a CSR. This structure is used to
select the key algorithm the SZTP-client should use to generate a
new asymmetric key, if supported, the kind of CSR structure the
SZTP-client should generate and, optionally, the content for the
CSR itself.
* The various "csr" nodes are used by the SZTP-client to communicate
a CSR to the SZTP-server.
| No data model is defined enabling an SZTP-server to communicate
| the signed certificate to the SZTP-client. How to do this is
| discussed in Section 2.2.
To further illustrate how the augmentation and structure defined by
the "ietf-sztp-csr" module are used, below are two additional tree
diagrams showing these nodes placed where they are used.
The following tree diagram [RFC8340] illustrates SZTP's "get-
bootstrapping-data" RPC with the augmentation in place.
Watsen, et al. Expires 6 June 2022 [Page 6]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
=============== NOTE: '\' line wrapping per RFC 8792 ================
module: ietf-sztp-bootstrap-server
rpcs:
+---x get-bootstrapping-data
+---w input
| +---w signed-data-preferred? empty
| +---w hw-model? string
| +---w os-name? string
| +---w os-version? string
| +---w nonce? binary
| +---w (sztp-csr:msg-type)?
| +--:(sztp-csr:csr-support)
| | +---w sztp-csr:csr-support
| | +---w sztp-csr:key-generation!
| | | +---w sztp-csr:supported-algorithms
| | | +---w sztp-csr:algorithm-identifier* bina\
ry
| | +---w sztp-csr:csr-generation
| | +---w sztp-csr:supported-formats
| | +---w sztp-csr:format-identifier* identit\
yref
| +--:(sztp-csr:csr)
| +---w (sztp-csr:csr-type)
| +--:(sztp-csr:p10-csr)
| | +---w sztp-csr:p10-csr? ct:csr
| +--:(sztp-csr:cmc-csr)
| | +---w sztp-csr:cmc-csr? binary
| +--:(sztp-csr:cmp-csr)
| +---w sztp-csr:cmp-csr? binary
+--ro output
+--ro reporting-level? enumeration {onboarding-server}?
+--ro conveyed-information cms
+--ro owner-certificate? cms
+--ro ownership-voucher? cms
The following tree diagram [RFC8340] illustrates RESTCONF's "errors"
RPC-reply message with the "csr-request" structure in place.
Watsen, et al. Expires 6 June 2022 [Page 7]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
module: ietf-restconf
+--ro errors
+--ro error* []
+--ro error-type enumeration
+--ro error-tag string
+--ro error-app-tag? string
+--ro error-path? instance-identifier
+--ro error-message? string
+--ro error-info
+--ro csr-request
+--ro key-generation!
| +--ro selected-algorithm
| +--ro algorithm-identifier binary
+--ro csr-generation
| +--ro selected-format
| +--ro format-identifier identityref
+--ro cert-req-info? ct:csr-info
2.2. Example Usage
| The examples below are encoded using JSON, but they could
| equally well be encoded using XML, as is supported by SZTP.
An SZTP-client implementing this specification would signal to the
bootstrap server its willingness to generate a CSR by including the
"csr-support" node in its "get-bootstrapping-data" RPC. In the
example below, the SZTP-client additionally indicates that it is able
to generate keys and provides a list of key algorithms it supports,
as well as provide a list of certificate formats it supports.
REQUEST
Watsen, et al. Expires 6 June 2022 [Page 8]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
=============== NOTE: '\' line wrapping per RFC 8792 ================
POST /restconf/operations/ietf-sztp-bootstrap-server:get-bootstrappi\
ng-data HTTP/1.1
HOST: example.com
Content-Type: application/yang.data+json
{
"ietf-sztp-bootstrap-server:input" : {
"hw-model": "model-x",
"os-name": "vendor-os",
"os-version": "17.3R2.1",
"nonce": "extralongbase64encodedvalue=",
"ietf-sztp-csr:csr-support": {
"key-generation": {
"supported-algorithms": {
"algorithm-identifier": [
"BASE64VALUE1",
"BASE64VALUE2",
"BASE64VALUE3"
]
}
},
"csr-generation": {
"supported-formats": {
"format-identifier": [
"ietf-ztp-types:p10-csr",
"ietf-ztp-types:cmc-csr",
"ietf-ztp-types:cmp-csr"
]
}
}
}
}
}
Assuming the SZTP-server wishes to prompt the SZTP-client to provide
a CSR, then it would respond with an HTTP 400 Bad Request error code.
In the example below, the SZTP-server specifies that it wishes the
SZTP-client to generate a key using a specific algorithm and generate
a P10-based CSR containing specific content.
RESPONSE
Watsen, et al. Expires 6 June 2022 [Page 9]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
HTTP/1.1 400 Bad Request
Date: Sat, 31 Oct 2015 17:02:40 GMT
Server: example-server
Content-Type: application/yang.data+json
{
"ietf-restconf:errors" : {
"error" : [
{
"error-type": "application",
"error-tag": "missing-attribute",
"error-message": "Missing input parameter",
"error-info": {
"ietf-sztp-csr:csr-request": {
"key-generation": {
"selected-algorithm": {
"algorithm-identifier": "BASE64VALUE="
}
},
"csr-generation": {
"selected-format": {
"format-identifier": "ietf-ztp-types:p10-csr"
}
},
"cert-req-info": "BASE64VALUE="
}
}
}
]
}
}
Upon being prompted to provide a CSR, the SZTP-client would POST
another "get-bootstrapping-data" request, but this time including one
of the "csr" nodes to convey its CSR to the SZTP-server:
REQUEST
Watsen, et al. Expires 6 June 2022 [Page 10]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
=============== NOTE: '\' line wrapping per RFC 8792 ================
POST /restconf/operations/ietf-sztp-bootstrap-server:get-bootstrappi\
ng-data HTTP/1.1
HOST: example.com
Content-Type: application/yang.data+json
{
"ietf-sztp-bootstrap-server:input" : {
"hw-model": "model-x",
"os-name": "vendor-os",
"os-version": "17.3R2.1",
"nonce": "extralongbase64encodedvalue=",
"ietf-sztp-csr:p10-csr": "BASE64VALUE="
}
}
At this point, it is expected that the SZTP-server, perhaps in
conjunction with other systems, such as a backend CA or RA, will
validate the CSR's origin and proof-of-possession and, assuming the
CSR is approved, issue a signed certificate for the bootstrapping
device.
The SZTP-server responds with "onboarding-information" (encoded
inside the "conveyed-information" node, shown below) containing a
signed identity certificate for the CSR provided by the SZTP-client:
RESPONSE
HTTP/1.1 200 OK
Date: Sat, 31 Oct 2015 17:02:40 GMT
Server: example-server
Content-Type: application/yang.data+json
{
"ietf-sztp-bootstrap-server:output" : {
"reporting-level": "verbose",
"conveyed-information": "BASE64VALUE="
}
}
How the signed certificate is conveyed inside the onboarding
information is outside the scope of this document. Some
implementations may choose to convey it inside a script (e.g., SZTP's
"pre-configuration-script"), while other implementations may choose
to convey it inside the SZTP "configuration" node. SZTP onboarding
information is described in Section 2.2 of [RFC8572].
Watsen, et al. Expires 6 June 2022 [Page 11]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
Following are two examples of conveying the signed certificate inside
the "configuration" node. Both examples assume that the SZTP-client
understands the "ietf-keystore" module defined in
[I-D.ietf-netconf-keystore].
This first example illustrates the case where the signed certificate
is for the same asymmetric key used by the SZTP-client's
manufacturer-generated identity certificate (e.g., an IDevID, from
[Std-802.1AR-2018]). As such, the configuration needs to associate
the newly signed certificate with the existing asymmetric key:
=============== NOTE: '\' line wrapping per RFC 8792 ================
{
"ietf-keystore:keystore": {
"asymmetric-keys": {
"asymmetric-key": [
{
"name": "Manufacturer-Generated Hidden Key",
"public-key-format": "ietf-crypto-types:subject-public-key\
-info-format",
"public-key": "BASE64VALUE=",
"hidden-private-key": [null],
"certificates": {
"certificate": [
{
"name": "Manufacturer-Generated IDevID Cert",
"cert-data": "BASE64VALUE="
},
{
"name": "Newly-Generated LDevID Cert",
"cert-data": "BASE64VALUE="
}
]
}
}
]
}
}
}
This second example illustrates the case where the signed certificate
is for a newly generated asymmetric key. As such, the configuration
needs to associate the newly signed certificate with the newly
generated asymmetric key:
Watsen, et al. Expires 6 June 2022 [Page 12]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
=============== NOTE: '\' line wrapping per RFC 8792 ================
{
"ietf-keystore:keystore": {
"asymmetric-keys": {
"asymmetric-key": [
{
"name": "Manufacturer-Generated Hidden Key",
"public-key-format": "ietf-crypto-types:subject-public-key\
-info-format",
"public-key": "BASE64VALUE=",
"hidden-private-key": [null],
"certificates": {
"certificate": [
{
"name": "Manufacturer-Generated IDevID Cert",
"cert-data": "BASE64VALUE="
}
]
}
},
{
"name": "Newly-Generated Hidden Key",
"public-key-format": "ietf-crypto-types:subject-public-key\
-info-format",
"public-key": "BASE64VALUE=",
"hidden-private-key": [null],
"certificates": {
"certificate": [
{
"name": "Newly-Generated LDevID Cert",
"cert-data": "BASE64VALUE="
}
]
}
}
]
}
}
}
In addition to configuring the signed certificate, it is often
necessary to also configure the Issuer's signing certificate so that
the device (i.e., STZP-client) can authenticate certificates
presented by peer devices signed by the same issuer as its own.
While outside the scope of this document, one way to do this would be
to use the "ietf-truststore" module defined in
[I-D.ietf-netconf-trust-anchors].
Watsen, et al. Expires 6 June 2022 [Page 13]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
2.3. YANG Module
This module augments an RPC defined in [RFC8572]. The module uses a
data types and groupings defined in [RFC8572], [RFC8791], and
[I-D.ietf-netconf-crypto-types]. The module has additional normative
references to [RFC2986], [RFC5272], [RFC4210], and [ITU.X690.2015],
and an informative reference to [Std-802.1AR-2018].
<CODE BEGINS> file "ietf-sztp-csr@2021-12-03.yang"
module ietf-sztp-csr {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-sztp-csr";
prefix sztp-csr;
import ietf-sztp-bootstrap-server {
prefix sztp-svr;
reference
"RFC 8572: Secure Zero Touch Provisioning (SZTP)";
}
import ietf-yang-structure-ext {
prefix sx;
reference
"RFC 8791: YANG Data Structure Extensions";
}
import ietf-ztp-types {
prefix zt;
reference
"RFC XXXX: Conveying a Certificate Signing Request (CSR)
in a Secure Zero Touch Provisioning (SZTP)
Bootstrapping Request";
}
organization
"IETF NETCONF (Network Configuration) Working Group";
contact
"WG Web: http://tools.ietf.org/wg/netconf
WG List: <mailto:netconf@ietf.org>
Authors: Kent Watsen <mailto:kent+ietf@watsen.net>
Russ Housley <mailto:housley@vigilsec.com>
Sean Turner <mailto:sean@sn3rd.com>";
description
"This module augments the 'get-bootstrapping-data' RPC,
defined in the 'ietf-sztp-bootstrap-server' module from
Watsen, et al. Expires 6 June 2022 [Page 14]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
SZTP (RFC 8572), enabling the SZTP-client to obtain a
signed identity certificate (e.g., an LDevID from IEEE
802.1AR) as part of the SZTP onboarding information
response.
Copyright (c) 2021 IETF Trust and the persons identified
as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Simplified
BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX
(https://www.rfc-editor.org/info/rfcXXXX); see the RFC
itself for full legal notices.
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this
document are to be interpreted as described in BCP 14
(RFC 2119) (RFC 8174) when, and only when, they appear
in all capitals, as shown here.";
revision 2021-12-03 {
description
"Initial version";
reference
"RFC XXXX: Conveying a Certificate Signing Request (CSR)
in a Secure Zero Touch Provisioning (SZTP)
Bootstrapping Request";
}
// Protocol-accessible nodes
augment "/sztp-svr:get-bootstrapping-data/sztp-svr:input" {
description
"This augmentation adds the 'csr-support' and 'csr' nodes to
the SZTP (RFC 8572) 'get-bootstrapping-data' request message,
enabling the SZTP-client to obtain an identity certificate
(e.g., an LDevID from IEEE 802.1AR) as part of the onboarding
information response provided by the SZTP-server.
The 'csr-support' node enables the SZTP-client to indicate
that it supports generating certificate signing requests
(CSRs), and to provide details around the CSRs it is able
Watsen, et al. Expires 6 June 2022 [Page 15]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
to generate.
The 'csr' node enables the SZTP-client to relay a CSR to
the SZTP-server.";
reference
"IEEE 802.1AR: IEEE Standard for Local and metropolitan
area networks - Secure Device Identity
RFC 8572: Secure Zero Touch Provisioning (SZTP)";
choice msg-type {
description
"Messages are mutually exclusive.";
case csr-support {
description
"Indicates how the SZTP-client supports generating CSRs.
If present and a SZTP-server wishes to request the
SZTP-client generate a CSR, the SZTP-server MUST
respond with HTTP code 400 Bad Request with an
'ietf-restconf:errors' message having the 'error-tag'
value 'missing-attribute' and the 'error-info' node
containing the 'csr-request' structure described
in this module.";
uses zt:csr-support-grouping;
}
case csr {
description
"Provides the CSR generated by the SZTP-client.
When present, the SZTP-server SHOULD respond with
an SZTP onboarding information message containing
a signed certificate for the conveyed CSR. The
SZTP-server MAY alternatively respond with another
HTTP error containing another 'csr-request', in
which case the SZTP-client MUST invalidate the
previously generated CSR.";
uses zt:csr-grouping;
}
}
}
sx:structure csr-request {
description
"A YANG data structure, per RFC 8791, that specifies
details for the CSR that the ZTP-client is to generate.";
reference
"RFC 8791: YANG Data Structure Extensions";
uses zt:csr-request-grouping;
}
Watsen, et al. Expires 6 June 2022 [Page 16]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
}
<CODE ENDS>
3. The "ietf-ztp-types" Module
This section defines a YANG 1.1 [RFC7950] module that defines three
YANG groupings, one each for messages sent between a ZTP-client and
ZTP-server. This module is defines independently of the "ietf-sztp-
csr" module so that it's groupings may be used by bootstrapping
protocols other than SZTP [RFC8572].
3.1. Data Model Overview
The following tree diagram [RFC8340] illustrates the three groupings
defined in the "ietf-ztp-types" module.
module: ietf-ztp-types
grouping csr-support-grouping
+-- csr-support
+-- key-generation!
| +-- supported-algorithms
| +-- algorithm-identifier* binary
+-- csr-generation
+-- supported-formats
+-- format-identifier* identityref
grouping csr-request-grouping
+-- key-generation!
| +-- selected-algorithm
| +-- algorithm-identifier binary
+-- csr-generation
| +-- selected-format
| +-- format-identifier identityref
+-- cert-req-info? ct:csr-info
grouping csr-grouping
+-- (csr-type)
+--:(p10-csr)
| +-- p10-csr? ct:csr
+--:(cmc-csr)
| +-- cmc-csr? binary
+--:(cmp-csr)
+-- cmp-csr? binary
Watsen, et al. Expires 6 June 2022 [Page 17]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
3.2. YANG Module
This module uses a data types and groupings [RFC8791] and
[I-D.ietf-netconf-crypto-types]. The module has additional normative
references to [RFC2986], [RFC4210], [RFC5272], and [ITU.X690.2015],
and an informative reference to [Std-802.1AR-2018].
<CODE BEGINS> file "ietf-ztp-types@2021-12-03.yang"
module ietf-ztp-types {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-ztp-types";
prefix zt;
import ietf-crypto-types {
prefix ct;
reference
"RFC AAAA: YANG Data Types and Groupings for Cryptography";
}
organization
"IETF NETCONF (Network Configuration) Working Group";
contact
"WG Web: http://tools.ietf.org/wg/netconf
WG List: <mailto:netconf@ietf.org>
Authors: Kent Watsen <mailto:kent+ietf@watsen.net>
Russ Housley <mailto:housley@vigilsec.com>
Sean Turner <mailto:sean@sn3rd.com>";
description
"This module defines three groupings that enable
bootstrapping devices to 1) indicate if and how they
support generating CSRs, 2) obtain a request to
generate a CSR, and 3) communicate the requested CSR.
Copyright (c) 2021 IETF Trust and the persons identified
as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Simplified
BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX
(https://www.rfc-editor.org/info/rfcXXXX); see the RFC
Watsen, et al. Expires 6 June 2022 [Page 18]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
itself for full legal notices.
The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this
document are to be interpreted as described in BCP 14
(RFC 2119) (RFC 8174) when, and only when, they appear
in all capitals, as shown here.";
revision 2021-12-03 {
description
"Initial version";
reference
"RFC XXXX: Conveying a Certificate Signing Request (CSR)
in a Secure Zero Touch Provisioning (SZTP)
Bootstrapping Request";
}
identity certificate-request-format {
description
"A base identity for the request formats supported
by the ZTP-client.
Additional derived identities MAY be defined by
future efforts.";
}
identity p10-csr {
base certificate-request-format;
description
"Indicates that the ZTP-client supports generating
requests using the 'CertificationRequest' structure
defined in RFC 2986.";
reference
"RFC 2986: PKCS #10: Certification Request Syntax
Specification Version 1.7";
}
identity cmp-csr {
base certificate-request-format;
description
"Indicates that the ZTP-client supports generating
requests using a constrained version of the PKIMessage
containing a p10cr structure defined in RFC 4210.";
reference
"RFC 4210: Internet X.509 Public Key Infrastructure
Certificate Management Protocol (CMP)";
}
Watsen, et al. Expires 6 June 2022 [Page 19]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
identity cmc-csr {
base certificate-request-format;
description
"Indicates that the ZTP-client supports generating
requests using a constrained version of the 'Full
PKI Request' structure defined in RFC 5272.";
reference
"RFC 5272: Certificate Management over CMS (CMC)";
}
// Protocol-accessible nodes
grouping csr-support-grouping {
description
"A grouping enabling use by other efforts.";
container csr-support {
description
"Enables a ZTP-client to indicate that it supports
generating certificate signing requests (CSRs) and
provides details about the CSRs it is able to
generate.";
container key-generation {
presence
"Indicates that the ZTP-client is capable of
generating a new asymmetric key pair.
If this node is not present, the ZTP-server MAY
request a CSR using the asymmetric key associated
with the device's existing identity certificate
(e.g., an IDevID from IEEE 802.1AR).";
description
"Specifies details for the ZTP-client's ability to
generate a new asymmetric key pair.";
container supported-algorithms {
description
"A list of public key algorithms supported by the
ZTP-client for generating a new asymmetric key.";
leaf-list algorithm-identifier {
type binary;
min-elements 1;
description
"An AlgorithmIdentifier, as defined in RFC 2986,
encoded using ASN.1 distinguished encoding rules
(DER), as specified in ITU-T X.690.";
reference
"RFC 2986: PKCS #10: Certification Request Syntax
Specification Version 1.7
ITU-T X.690:
Watsen, et al. Expires 6 June 2022 [Page 20]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
Information technology - ASN.1 encoding rules:
Specification of Basic Encoding Rules (BER),
Canonical Encoding Rules (CER) and Distinguished
Encoding Rules (DER).";
}
}
}
container csr-generation {
description
"Specifies details for the ZTP-client's ability to
generate a certificate signing requests.";
container supported-formats {
description
"A list of certificate request formats supported
by the ZTP-client for generating a new key.";
leaf-list format-identifier {
type identityref {
base zt:certificate-request-format;
}
min-elements 1;
description
"A certificate request format supported by the
ZTP-client.";
}
}
}
}
}
grouping csr-request-grouping {
description
"A grouping enabling use by other efforts.";
container key-generation {
presence
"Provided by a ZTP-server to indicate that it wishes
the ZTP-client to generate a new asymmetric key.
This statement is present so the mandatory descendant
nodes do not imply that this node must be configured.";
description
"The key generation parameters selected by the ZTP-server.
This leaf MUST only appear if the ZTP-client's
'csr-support' included the 'key-generation' node.";
container selected-algorithm {
description
"The key algorithm selected by the ZTP-server. The
algorithm MUST be one of the algorithms specified by
Watsen, et al. Expires 6 June 2022 [Page 21]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
the 'supported-algorithms' node in the ZTP-client's
message containing the 'csr-support' structure.";
leaf algorithm-identifier {
type binary;
mandatory true;
description
"An AlgorithmIdentifier, as defined in RFC 2986,
encoded using ASN.1 distinguished encoding rules
(DER), as specified in ITU-T X.690.";
reference
"RFC 2986: PKCS #10: Certification Request Syntax
Specification Version 1.7
ITU-T X.690:
Information technology - ASN.1 encoding rules:
Specification of Basic Encoding Rules (BER),
Canonical Encoding Rules (CER) and Distinguished
Encoding Rules (DER).";
}
}
}
container csr-generation {
description
"Specifies details for the CSR that the ZTP-client
is to generate.";
container selected-format {
description
"The CSR format selected by the ZTP-server. The
format MUST be one of the formats specified by
the 'supported-formats' node in the ZTP-client's
request message.";
leaf format-identifier {
type identityref {
base zt:certificate-request-format;
}
mandatory true;
description
"A certificate request format to be used by the
ZTP-client.";
}
}
}
leaf cert-req-info {
type ct:csr-info;
description
"A CertificationRequestInfo structure, as defined in
RFC 2986, and modeled via a 'typedef' statement by
RFC AAAA.
Watsen, et al. Expires 6 June 2022 [Page 22]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
Enables the ZTP-server to provide a fully-populated
CertificationRequestInfo structure that the ZTP-client
only needs to sign in order to generate the complete
'CertificationRequest' structure to send to ZTP-server
in its next 'get-bootstrapping-data' request message.
When provided, the ZTP-client SHOULD use this structure
to generate its CSR; failure to do so MAY result in a
400 Bad Request response containing another 'csr-request'
structure.
When not provided, the ZTP-client SHOULD generate a CSR
using the same structure defined in its existing identity
certificate (e.g., an IDevID from IEEE 802.1AR).
If the 'AlgorithmIdentifier' field contained inside the
certificate 'SubjectPublicKeyInfo' field does not match
the algorithm identified by the 'selected-algorithm' node,
then the client MUST reject the certificate and raise an
error.";
reference
"RFC 2986:
PKCS #10: Certification Request Syntax Specification
RFC AAAA:
YANG Data Types and Groupings for Cryptography";
}
}
grouping csr-grouping {
description
"Enables a ZTP-client to convey a certificate signing
request, using the encoding format selected by a
ZTP-server's 'csr-request' response to the ZTP-client's
previously sent 'get-bootstrapping-data' request
containing the 'csr-support' node.";
choice csr-type {
mandatory true;
description
"A choice amongst certificate signing request formats.
Additional formats MAY be augmented into this 'choice'
statement by future efforts.";
case p10-csr {
leaf p10-csr {
type ct:csr;
description
"A CertificationRequest structure, per RFC 2986.
Watsen, et al. Expires 6 June 2022 [Page 23]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
Encoding details are defined in the 'ct:csr'
typedef defined in RFC AAAA.
A raw P10 does not support origin authentication in
the CSR structure. External origin authentication
may be provided via the ZTP-client's authentication
to the ZTP-server at the transport layer (e.g., TLS).";
reference
"RFC 2986: PKCS #10: Certification Request Syntax
Specification
RFC AAAA: YANG Data Types and Groupings for
Cryptography";
}
}
case cmc-csr {
leaf cmc-csr {
type binary;
description
"A constrained version of the 'Full PKI Request'
message defined in RFC 5272, encoded using ASN.1
distinguished encoding rules (DER), as specified
in ITU-T X.690.
For asymmetric key-based origin authentication of a
CSR based on the initial device identity certificate's
private key for the associated identity certificate's
public key, the PKIData contains one reqSequence
element and no cmsSequence or otherMsgSequence
elements. The reqSequence is the TaggedRequest and it
is the tcr CHOICE. The tcr is the
TaggedCertificationRequest and it a bodyPartId and the
certificateRequest elements. The certificateRequest
is signed with the initial device identity
certificate's private key. The initial device identity
certificate and optionally its certificate chain is
included in the SignedData certificates that
encapsulates the PKIData.
For asymmetric key-based origin authentication based on
the initial device identity certificate's private key
that signs the encapsulated CSR signed by the local
device identity certificate's private key, the PKIData
contains one cmsSequence element and no
otherMsgSequence element. The cmsSequence is the
TaggedContentInfo and it includes a bodyPartID element
and a contentInfo. The contentInfo is a SignedData
encapsulating a PKIData with one reqSequence element
and no cmsSequence or otherMsgSequence elements. The
Watsen, et al. Expires 6 June 2022 [Page 24]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
reqSequence is the TaggedRequest and it is the tcr
CHOICE. The tcr is the TaggedCertificationRequest and
it a bodyPartId and the certificateRequest elements.
The certificateRequest is signed with the local device
identity certificate's private key. The initial device
identity certificate and optionally its certificate
chain is included in the SignedData certificates that
encapsulates the PKIData.
For shared secret-based origin authentication of a
CSR signed by the local device identity certificate's
private key, the PKIData contains one cmsSequence
element and no reqSequence or otherMsgSequence
elements. The cmsSequence is the TaggedContentInfo
and it includes a bodyPartID element and a contentInfo.
The contentInfo is an AuthenticatedData encapsulating
a PKIData with one reqSequence element and no
cmsSequences or otherMsgSequence elements. The
reqSequence is the TaggedRequest and it is the tcr
CHOICE. The tcr is the TaggedCertificationRequest and
it a bodyPartId and the certificateRequest elements.
The certificateRequest is signed with the local device
identity certificate's private key. The initial device
identity certificate and optionally its certificate
chain is included in the SignedData certificates that
encapsulates the PKIData.";
reference
"RFC 5272: Certificate Management over CMS (CMC)
ITU-T X.690:
Information technology - ASN.1 encoding rules:
Specification of Basic Encoding Rules (BER),
Canonical Encoding Rules (CER) and Distinguished
Encoding Rules (DER).";
}
}
case cmp-csr {
leaf cmp-csr {
type binary;
description
"A PKIMessage structure, as defined in RFC 4210,
encoded using ASN.1 distinguished encoding rules
(DER), as specified in ITU-T X.690.
For asymmetric key-based origin authentication of a
CSR based on the initial device identity certificate's
private key for the associated initial device identity
certificate's public key, PKIMessages contains one
PKIMessage with the header and body elements, no
Watsen, et al. Expires 6 June 2022 [Page 25]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
protection element, and should contain the extraCerts
element. The header element contains the pvno, sender,
and recipient elements. The pvno contains cmp2000, and
the sender contains the subject of the initial device
identity certificate. The body element contains a p10cr
CHOICE of type CertificationRequest. It is signed with
the initial device identity certificate's private key.
The extraCerts element contains the initial device
identity certificate, optionally followed by its
certificate chain excluding the trust anchor.
For asymmetric key-based origin authentication based on
the initial device identity certificate's private key
that signs the encapsulated CSR signed by the local
device identity certificate's private key, PKIMessages
contains one PKIMessage with the header, body, and
protection elements, and should contain the extraCerts
element. The header element contains the pvno, sender,
recipient, protectionAlg, and optionally senderKID
elements. The pvno contains cmp2000, the sender
contains the subject of the initial device identity
certificate, the protectionAlg contains the
AlgorithmIdentifier of the used signature algorithm,
and the senderKID contains the subject key identifier
of the initial device identity certificate. The body
element contains a p10cr CHOICE of type
CertificationRequest. It is signed with the local device
identity certificate's private key. The protection
element contains the digital signature generated with
the initial device identity certificate's private key.
The extraCerts element contains the initial device
identity certificate, optionally followed by its
certificate chain excluding the trust anchor.
For shared secret-based origin authentication of a
CSR signed by the local device identity certificate's
private key, PKIMessages contains one PKIMessage with
the header, body, and protection element, and no
extraCerts element. The header element contains the
pvno, sender, recipient, protectionAlg, and senderKID
elements. The pvno contains cmp2000, the protectionAlg
contains the AlgorithmIdentifier of the used MAC
algorithm, and the senderKID contains a reference
the recipient can use to identify the shared secret.
The body element contains a p10cr CHOICE of type
CertificationRequest. It is signed with the local
device identity certificate's private key. The
protection element contains the MAC value generated
Watsen, et al. Expires 6 June 2022 [Page 26]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
with the shared secret.";
reference
"RFC 4210:
Internet X.509 Public Key Infrastructure
Certificate Management Protocol (CMP)
ITU-T X.690:
Information technology - ASN.1 encoding rules:
Specification of Basic Encoding Rules (BER),
Canonical Encoding Rules (CER) and Distinguished
Encoding Rules (DER).";
}
}
}
}
}
<CODE ENDS>
4. Security Considerations
This document builds on top of the solution presented in [RFC8572]
and therefore all the Security Considerations discussed in RFC 8572
apply here as well.
4.1. SZTP-Client Considerations
4.1.1. Ensuring the Integrity of Asymmetric Private Keys
The private key the SZTP-client uses for the dynamically-generated
identity certificate MUST be protected from inadvertent disclosure in
order to prevent identity fraud.
The security of this private key is essential in order to ensure the
associated identity certificate can be used as a root of trust.
It is RECOMMENDED that devices are manufactured with an HSM (hardware
security module), such as a TPM (trusted platform module), to
generate and forever contain the private key within the security
perimeter of the HSM. In such cases, the private key, and its
associated certificates, MAY have long validity periods.
In cases where the SZTP-client does not possess an HSM, or is unable
to use an HSM to protect the private key, it is RECOMMENDED to
periodically reset the private key (and associated identity
certificates) in order to minimize the lifetime of unprotected
private keys. For instance, an NMS controller/orchestrator
application could periodically prompt the SZTP-client to generate a
Watsen, et al. Expires 6 June 2022 [Page 27]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
new private key and provide a certificate signing request (CSR) or,
alternatively, push both the key and an identity certificate to the
SZTP-client using, e.g., a PKCS #12 [RFC7292]. In another example,
the SZTP-client could be configured to periodically reset the
configuration to its factory default, thus causing removal of the
private key and associated identity certificates and reexecution of
the SZTP protocol.
4.1.2. Reuse of a Manufacturer-generated Private Key
It is RECOMMENDED that a new private key is generated for each CSR
described in this document.
Implementations must randomly generate nonces and private keys. The
use of inadequate pseudo-random number generators (PRNGs) to generate
cryptographic keys can result in little or no security. An attacker
may find it much easier to reproduce the PRNG environment that
produced the keys, searching the resulting small set of
possibilities, rather than brute force searching the whole key space.
As an example of predictable random numbers see CVE-2008-0166
[CVE-2008-0166], and some consequences of low-entropy random numbers
are discussed in Mining Your Ps and Qs [MiningPsQs]. The generation
of quality random numbers is difficult. [ISO.20543-2019],
[NIST.SP.800-90Ar1], BSI AIS 31 [AIS31], BCP 106 [RFC4086], and
others offer valuable guidance in this area.
This private key SHOULD be protected as well as the built-in private
key associated with the SZTP-client's initial device identity
certificate (e.g., the IDevID, from [Std-802.1AR-2018]).
In cases where it is not possible to generate a new private key that
is protected as well as the built-in private key, it is RECOMMENDED
to reuse the built-in private key rather than generate a new private
key that is not as well protected.
4.1.3. Replay Attack Protection
This RFC enables an SZTP-client to announce an ability to generate a
new key to use for its CSR.
When the SZTP-server responds with a request for the SZTP-client to
generate a new key, it is essential that the SZTP-client actually
generates a new key.
Generating a new key each time enables the random bytes used to
create the key to also serve the dual-purpose of acting like a
"nonce" used in other mechanisms to detect replay attacks.
Watsen, et al. Expires 6 June 2022 [Page 28]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
When a fresh public/private key pair is generated for the request,
confirmation to the SZTP-client that the response has not been
replayed is enabled by the SZTP-client's fresh public key appearing
in the signed certificate provided by the SZTP-server.
When a public/private key pair associated with the manufacturer-
generated identity certificate (e.g., IDevID) is used for the
request, there may not be confirmation to the SZTP-client that the
response has not been replayed; however, the worst case result is a
lost certificate that is associated to the private key known only to
the SZTP-client.
4.1.4. Connecting to an Untrusted Bootstrap Server
[RFC8572] allows SZTP-clients to connect to untrusted SZTP-servers,
by blindly authenticating the SZTP-server's TLS end-entity
certificate.
As is discussed in Section 9.5 of [RFC8572], in such cases the SZTP-
client MUST assert that the bootstrapping data returned is signed, if
the SZTP-client is to trust it.
However, the HTTP error message used in this document cannot be
signed data, as described in RFC 8572.
Therefore, the solution presented in this document cannot be used
when the SZTP-client connects to an untrusted SZTP-server.
Consistent with the recommendation presented in Section 9.6 of
[RFC8572], SZTP-clients SHOULD NOT pass the "csr-support" input
parameter to an untrusted SZTP-server. SZTP-clients SHOULD pass
instead the "signed-data-preferred" input parameter, as discussed in
Appendix B of [RFC8572].
4.1.5. Selecting the Best Origin Authentication Mechanism
The origin of the CSR must be verified before a certificate is
issued.
When generating a new key, it is important that the SZTP-client be
able to provide additional proof that it was the entity that
generated the key.
The CMP and CMC certificate request formats defined in this document
support origin authentication. A raw PKCS#10 does not support origin
authentication.
Watsen, et al. Expires 6 June 2022 [Page 29]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
The CMP and CMC request formats support origin authentication using
both PKI and shared secret.
Typically, only one possible origin authentication mechanism can
possibly be used but, in the case that the SZTP-client authenticates
itself using both TLS-level (e.g., IDevID) and HTTP-level credentials
(e.g., Basic), as is allowed by Section 5.3 of [RFC8572], then the
SZTP-client may need to choose between the two options.
In the case that the SZTP-client must choose between an asymmetric
key option versus a shared secret for origin authentication, it is
RECOMMENDED that the SZTP-client choose using the asymmetric key.
4.1.6. Clearing the Private Key and Associated Certificate
Unlike a manufacturer-generated identity certificate (e.g., IDevID),
the deployment-generated identity certificate (e.g., LDevID) and the
associated private key (assuming a new private key was generated for
the purpose), are considered user data and SHOULD be cleared whenever
the SZTP-client is reset to its factory default state, such as by the
"factory-reset" RPC defined in [I-D.ietf-netmod-factory-default].
4.2. SZTP-Server Considerations
4.2.1. Verifying Proof of Possession
Regardless if using a new asymmetric key or the bootstrapping
device's manufacturer-generated key (e.g., the IDevID key), the
public key is placed in the CSR and the CSR is signed by that private
key. Proof-of-possession of the private key is verified by ensuring
the signature over the CSR using the public key placed in the CSR.
4.2.2. Verifying Proof of Origin
When the bootstrapping device's manufacturer-generated private key
(e.g., the IDevID key) is reused for the CSR, proof-of-origin is
verified by validating the IDevID-issuer cert and ensuring that the
CSR uses the same key pair.
When a new asymmetric key is used, with the CMP or CMC formats, the
parent ASN.1 structure of the CSR provides origin authentication
using either the manufacturer-generated private key or a shared
secret. In this way the proof-of-possession of the CSR is directly
linked to the proof-or-origin provided by the parent ASN.1 structure.
Watsen, et al. Expires 6 June 2022 [Page 30]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
4.2.3. Supporting SZTP-Clients that don't trust the SZTP-Server
[RFC8572] allows SZTP-clients to connect to untrusted SZTP-servers,
by blindly authenticating the SZTP-server's TLS end-entity
certificate.
As is recommended in Section 4.1.4 in this document, in such cases,
SZTP-clients SHOULD pass the "signed-data-preferred" input parameter.
The reciprocal of this statement is that SZTP-servers, wanting to
support SZTP-clients that don't trust them, SHOULD support the
"signed-data-preferred" input parameter, as discussed in Appendix B
of [RFC8572].
4.3. Security Considerations for the "ietf-sztp-csr" YANG Module
The recommended format for documenting the Security Considerations
for YANG modules is described in Section 3.7 of [RFC8407]. However,
this module only augments two input parameters into the "get-
bootstrapping-data" RPC in [RFC8572], and therefore only needs to
point to the relevant Security Considerations sections in that RFC.
* Security considerations for the "get-bootstrapping-data" RPC are
described in Section 9.16 of [RFC8572].
* Security considerations for the "input" parameters passed inside
the "get-bootstrapping-data" RPC are described in Section 9.6 of
[RFC8572].
4.4. Security Considerations for the "ietf-ztp-types" YANG Module
The recommended format for documenting the Security Considerations
for YANG modules is described in Section 3.7 of [RFC8407]. However,
this module does not define any protocol-accessible nodes (it only
defines "identity" and "grouping" statements) and therefore there are
no Security considerations to report.
5. IANA Considerations
5.1. The "IETF XML" Registry
This document registers two URIs in the "ns" subregistry of the IETF
XML Registry [RFC3688] maintained at
https://www.iana.org/assignments/xml-registry/xml-registry.xhtml#ns.
Following the format in [RFC3688], the following registrations are
requested:
Watsen, et al. Expires 6 June 2022 [Page 31]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
URI: urn:ietf:params:xml:ns:yang:ietf-sztp-csr
Registrant Contact: The NETCONF WG of the IETF.
XML: N/A, the requested URI is an XML namespace.
URI: urn:ietf:params:xml:ns:yang:ietf-ztp-types
Registrant Contact: The NETCONF WG of the IETF.
XML: N/A, the requested URI is an XML namespace.
5.2. The "YANG Module Names" Registry
This document registers two YANG modules in the YANG Module Names
registry [RFC6020] maintained at https://www.iana.org/assignments/
yang-parameters/yang-parameters.xhtml. Following the format defined
in [RFC6020], the below registrations are requested:
name: ietf-sztp-csr
namespace: urn:ietf:params:xml:ns:yang:ietf-sztp-csr
prefix: sztp-csr
reference: RFC XXXX
name: ietf-ztp-types
namespace: urn:ietf:params:xml:ns:yang:ietf-ztp-types
prefix: ztp-types
reference: RFC XXXX
6. References
6.1. Normative References
[I-D.ietf-netconf-crypto-types]
Watsen, K., "YANG Data Types and Groupings for
Cryptography", Work in Progress, Internet-Draft, draft-
ietf-netconf-crypto-types-21, 14 September 2021,
<https://datatracker.ietf.org/doc/html/draft-ietf-netconf-
crypto-types-21>.
[ITU.X690.2015]
International Telecommunication Union, "Information
Technology - ASN.1 encoding rules: Specification of Basic
Encoding Rules (BER), Canonical Encoding Rules (CER) and
Distinguished Encoding Rules (DER)", ITU-T Recommendation
X.690, ISO/IEC 8825-1, August 2015,
<https://www.itu.int/rec/T-REC-X.690/>.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
Watsen, et al. Expires 6 June 2022 [Page 32]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
[RFC2986] Nystrom, M. and B. Kaliski, "PKCS #10: Certification
Request Syntax Specification Version 1.7", RFC 2986,
DOI 10.17487/RFC2986, November 2000,
<https://www.rfc-editor.org/info/rfc2986>.
[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
DOI 10.17487/RFC3688, January 2004,
<https://www.rfc-editor.org/info/rfc3688>.
[RFC4210] Adams, C., Farrell, S., Kause, T., and T. Mononen,
"Internet X.509 Public Key Infrastructure Certificate
Management Protocol (CMP)", RFC 4210,
DOI 10.17487/RFC4210, September 2005,
<https://www.rfc-editor.org/info/rfc4210>.
[RFC5272] Schaad, J. and M. Myers, "Certificate Management over CMS
(CMC)", RFC 5272, DOI 10.17487/RFC5272, June 2008,
<https://www.rfc-editor.org/info/rfc5272>.
[RFC6020] Bjorklund, M., Ed., "YANG - A Data Modeling Language for
the Network Configuration Protocol (NETCONF)", RFC 6020,
DOI 10.17487/RFC6020, October 2010,
<https://www.rfc-editor.org/info/rfc6020>.
[RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
RFC 7950, DOI 10.17487/RFC7950, August 2016,
<https://www.rfc-editor.org/info/rfc7950>.
[RFC8040] Bierman, A., Bjorklund, M., and K. Watsen, "RESTCONF
Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017,
<https://www.rfc-editor.org/info/rfc8040>.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, <https://www.rfc-editor.org/info/rfc8174>.
[RFC8572] Watsen, K., Farrer, I., and M. Abrahamsson, "Secure Zero
Touch Provisioning (SZTP)", RFC 8572,
DOI 10.17487/RFC8572, April 2019,
<https://www.rfc-editor.org/info/rfc8572>.
[RFC8791] Bierman, A., Björklund, M., and K. Watsen, "YANG Data
Structure Extensions", RFC 8791, DOI 10.17487/RFC8791,
June 2020, <https://www.rfc-editor.org/info/rfc8791>.
6.2. Informative References
Watsen, et al. Expires 6 June 2022 [Page 33]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
[AIS31] Bundesamt für Sicherheit in der Informationstechnik (BSI),
"Application Notes and Interpretation of the Scheme (AIS)
31 - Functionality Classes and Evaluation Methodology for
Physical Random Number Generators", 25 September 2001.
[CVE-2008-0166]
National Institute of Science and Technology (NIST),
"National Vulnerability Database - CVE-2008-0166", 13 May
2008, <https://nvd.nist.gov/vuln/detail/CVE-2008-0166>.
[I-D.ietf-netconf-keystore]
Watsen, K., "A YANG Data Model for a Keystore", Work in
Progress, Internet-Draft, draft-ietf-netconf-keystore-22,
18 May 2021, <https://datatracker.ietf.org/doc/html/draft-
ietf-netconf-keystore-22>.
[I-D.ietf-netconf-trust-anchors]
Watsen, K., "A YANG Data Model for a Truststore", Work in
Progress, Internet-Draft, draft-ietf-netconf-trust-
anchors-15, 18 May 2021,
<https://datatracker.ietf.org/doc/html/draft-ietf-netconf-
trust-anchors-15>.
[I-D.ietf-netmod-factory-default]
Wu, Q., Lengyel, B., and Y. Niu, "A YANG Data Model for
Factory Default Settings", Work in Progress, Internet-
Draft, draft-ietf-netmod-factory-default-15, 25 April
2020, <https://datatracker.ietf.org/doc/html/draft-ietf-
netmod-factory-default-15>.
[ISO.20543-2019]
International Organization for Standardization (ISO),
"Information technology -- Security techniques -- Test and
analysis methods for random bit generators within ISO/IEC
19790 and ISO/IEC 15408", ISO Draft Standard 20543-2019,
October 2019.
[MiningPsQs]
Security'12: Proceedings of the 21st USENIX conference on
Security symposium, Heninger, N., Durumeric, Z., Wustrow,
E., and J. A. Halderman, "Mining Your Ps and Qs: Detection
of Widespread Weak Keys in Network Devices", August 2012,
<https://www.usenix.org/conference/usenixsecurity12/
technical-sessions/presentation/heninger>.
[NIST.SP.800-90Ar1]
Barker, Elaine B. and John M. Kelsey, "Recommendation for
Random Number Generation Using Deterministic Random Bit
Watsen, et al. Expires 6 June 2022 [Page 34]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
Generators", DOI 10.6028/NIST.SP.800-90Ar1, NIST NIST SP
800-90Ar1, June 2015,
<https://nvlpubs.nist.gov/nistpubs/SpecialPublications/
NIST.SP.800-90Ar1.pdf>.
[RFC4086] Eastlake 3rd, D., Schiller, J., and S. Crocker,
"Randomness Requirements for Security", BCP 106, RFC 4086,
DOI 10.17487/RFC4086, June 2005,
<https://www.rfc-editor.org/info/rfc4086>.
[RFC7292] Moriarty, K., Ed., Nystrom, M., Parkinson, S., Rusch, A.,
and M. Scott, "PKCS #12: Personal Information Exchange
Syntax v1.1", RFC 7292, DOI 10.17487/RFC7292, July 2014,
<https://www.rfc-editor.org/info/rfc7292>.
[RFC8340] Bjorklund, M. and L. Berger, Ed., "YANG Tree Diagrams",
BCP 215, RFC 8340, DOI 10.17487/RFC8340, March 2018,
<https://www.rfc-editor.org/info/rfc8340>.
[RFC8407] Bierman, A., "Guidelines for Authors and Reviewers of
Documents Containing YANG Data Models", BCP 216, RFC 8407,
DOI 10.17487/RFC8407, October 2018,
<https://www.rfc-editor.org/info/rfc8407>.
[Std-802.1AR-2018]
Group, W. -. H. L. L. P. W., "IEEE Standard for Local and
metropolitan area networks - Secure Device Identity", 14
June 2018, <http://standards.ieee.org/findstds/
standard/802.1AR-2018.html>.
Acknowledgements
The authors would like to thank for following for lively discussions
on list and in the halls (ordered by first name): David von Oheimb,
Hendrik Brockhaus, Guy Fedorkow, Joe Clarke, Rich Salz, Rob Wilton,
and Qin Wu.
Contributors
Special thanks goes to David von Oheimb and Hendrik Brockhaus for
helping with the descriptions for the "cmc-csr" and "cmp-csr" nodes.
Authors' Addresses
Kent Watsen
Watsen Networks
Email: kent+ietf@watsen.net
Watsen, et al. Expires 6 June 2022 [Page 35]
Internet-Draft Conveying a CSR in an SZTP Request December 2021
Russ Housley
Vigil Security, LLC
Email: housley@vigilsec.com
Sean Turner
sn3rd
Email: sean@sn3rd.com
Watsen, et al. Expires 6 June 2022 [Page 36]