Skip to main content

JSON Web Token (JWT) Bearer Token Profiles for OAuth 2.0
draft-ietf-oauth-jwt-bearer-04

The information below is for an old version of the document.
Document Type
This is an older version of an Internet-Draft that was ultimately published as RFC 7523.
Authors Michael B. Jones , Brian Campbell , Chuck Mortimore
Last updated 2012-12-28
RFC stream Internet Engineering Task Force (IETF)
Formats
Reviews
Additional resources Mailing list discussion
Stream WG state WG Document
Document shepherd (None)
IESG IESG state Became RFC 7523 (Proposed Standard)
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)
draft-ietf-oauth-jwt-bearer-04
OAuth Working Group                                             M. Jones
Internet-Draft                                                 Microsoft
Intended status: Standards Track                             B. Campbell
Expires: June 30, 2013                                     Ping Identity
                                                            C. Mortimore
                                                              Salesforce
                                                       December 27, 2012

        JSON Web Token (JWT) Bearer Token Profiles for OAuth 2.0
                     draft-ietf-oauth-jwt-bearer-04

Abstract

   This specification defines the use of a JSON Web Token (JWT) Bearer
   Token as a means for requesting an OAuth 2.0 access token as well as
   for use as a means of client authentication.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on June 30, 2013.

Copyright Notice

   Copyright (c) 2012 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as

Jones, et al.             Expires June 30, 2013                 [Page 1]
Internet-Draft       OAuth JWT Bearer Token Profiles       December 2012

   described in the Simplified BSD License.

Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
     1.1.  Notational Conventions . . . . . . . . . . . . . . . . . .  4
     1.2.  Terminology  . . . . . . . . . . . . . . . . . . . . . . .  4
   2.  HTTP Parameter Bindings for Transporting Assertions  . . . . .  4
     2.1.  Using JWTs as Authorization Grants . . . . . . . . . . . .  4
     2.2.  Using JWTs for Client Authentication . . . . . . . . . . .  5
   3.  JWT Format and Processing Requirements . . . . . . . . . . . .  5
     3.1.  Authorization Grant Processing . . . . . . . . . . . . . .  7
     3.2.  Client Authentication Processing . . . . . . . . . . . . .  7
   4.  Authorization Grant Example  . . . . . . . . . . . . . . . . .  7
   5.  Security Considerations  . . . . . . . . . . . . . . . . . . .  8
   6.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . .  8
     6.1.  Sub-Namespace Registration of
           urn:ietf:params:oauth:grant-type:jwt-bearer  . . . . . . .  8
     6.2.  Sub-Namespace Registration of
           urn:ietf:params:oauth:client-assertion-type:jwt-bearer . .  9
   7.  References . . . . . . . . . . . . . . . . . . . . . . . . . .  9
     7.1.  Normative References . . . . . . . . . . . . . . . . . . .  9
     7.2.  Informative References . . . . . . . . . . . . . . . . . . 10
   Appendix A.  Acknowledgements  . . . . . . . . . . . . . . . . . . 10
   Appendix B.  Document History  . . . . . . . . . . . . . . . . . . 10
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 11

Jones, et al.             Expires June 30, 2013                 [Page 2]
Internet-Draft       OAuth JWT Bearer Token Profiles       December 2012

1.  Introduction

   JSON Web Token (JWT) [JWT] is a JavaScript Object Notation (JSON)
   [RFC4627] based security token encoding that enables identity and
   security information to be shared across security domains.  A
   security token is generally issued by an identity provider and
   consumed by a relying party that relies on its content to identify
   the token's subject for security related purposes.

   The OAuth 2.0 Authorization Framework [RFC6749] provides a method for
   making authenticated HTTP requests to a resource using an access
   token.  Access tokens are issued to third-party clients by an
   authorization server (AS) with the (sometimes implicit) approval of
   the resource owner.  In OAuth, an authorization grant is an abstract
   term used to describe intermediate credentials that represent the
   resource owner authorization.  An authorization grant is used by the
   client to obtain an access token.  Several authorization grant types
   are defined to support a wide range of client types and user
   experiences.  OAuth also allows for the definition of new extension
   grant types to support additional clients or to provide a bridge
   between OAuth and other trust frameworks.  Finally, OAuth allows the
   definition of additional authentication mechanisms to be used by
   clients when interacting with the authorization server.

   The Assertion Framework for OAuth 2.0 [I-D.ietf-oauth-assertions] is
   an abstract extension to OAuth 2.0 that provides a general framework
   for the use of Assertions (a.k.a.  Security Tokens) as client
   credentials and/or authorization grants with OAuth 2.0.  This
   specification profiles the Assertion Framework for OAuth 2.0
   [I-D.ietf-oauth-assertions] to define an extension grant type that
   uses a JSON Web Token (JWT) Bearer Token to request an OAuth 2.0
   access token as well as for use as client credentials.  The format
   and processing rules for the JWT defined in this specification are
   intentionally similar, though not identical, to those in the closely
   related SAML 2.0 Bearer Assertion Profiles for OAuth 2.0
   [I-D.ietf-oauth-saml2-bearer].

   This document defines how a JSON Web Token (JWT) Bearer Token can be
   used to request an access token when a client wishes to utilize an
   existing trust relationship, expressed through the semantics of (and
   digital signature calculated over) the JWT, without a direct user
   approval step at the authorization server.  It also defines how a JWT
   can be used as a client authentication mechanism.  The use of a
   security token for client authentication is orthogonal to and
   separable from using a security token as an authorization grant.
   They can be used either in combination or separately.  Client
   authentication using a JWT is nothing more than an alternative way
   for a client to authenticate to the token endpoint and must be used

Jones, et al.             Expires June 30, 2013                 [Page 3]
Internet-Draft       OAuth JWT Bearer Token Profiles       December 2012

   in conjunction with some grant type to form a complete and meaningful
   protocol request.  JWT authorization grants may be used with or
   without client authentication or identification.  Whether or not
   client authentication is needed in conjunction with a JWT
   authorization grant, as well as the supported types of client
   authentication, are policy decisions at the discretion of the
   authorization server.

   The process by which the client obtains the JWT, prior to exchanging
   it with the authorization server or using it for client
   authentication, is out of scope.

1.1.  Notational Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].

   Unless otherwise noted, all the protocol parameter names and values
   are case sensitive.

1.2.  Terminology

   All terms are as defined in The OAuth 2.0 Authorization Framework
   [RFC6749], Assertion Framework for OAuth 2.0
   [I-D.ietf-oauth-assertions], and JSON Web Token (JWT) [JWT].

2.  HTTP Parameter Bindings for Transporting Assertions

   The Assertion Framework for OAuth 2.0 [I-D.ietf-oauth-assertions]
   defines generic HTTP parameters for transporting Assertions (a.k.a.
   Security Tokens) during interactions with a token endpoint.  This
   section defines the values of those parameters for use with JWT
   Bearer Tokens.

2.1.  Using JWTs as Authorization Grants

   To use a JWT Bearer Token as an authorization grant, use the
   following parameter values and encodings.

   The value of the "grant_type" parameter MUST be
   "urn:ietf:params:oauth:grant-type:jwt-bearer".

   The value of the "assertion" parameter MUST contain a single JWT.

   The following non-normative example demonstrates an Access Token
   Request with a JWT as an authorization grant (with extra line breaks

Jones, et al.             Expires June 30, 2013                 [Page 4]
Internet-Draft       OAuth JWT Bearer Token Profiles       December 2012

   for display purposes only):

     POST /token.oauth2 HTTP/1.1
     Host: as.example.com
     Content-Type: application/x-www-form-urlencoded

     grant_type=urn%3Aietf%3Aparams%3Aoauth%3Agrant-type%3Ajwt-bearer
     &assertion=eyJhbGciOiJFUzI1NiJ9.
     eyJpc3Mi[...omitted for brevity...].
     J9l-ZhwP[...omitted for brevity...]

2.2.  Using JWTs for Client Authentication

   To use a JWT Bearer Token for client authentication, use the
   following parameter values and encodings.

   The value of the "client_assertion_type" parameter MUST be
   "urn:ietf:params:oauth:client-assertion-type:jwt-bearer".

   The value of the "client_assertion" parameter MUST contain a single
   JWT.

   The following non-normative example demonstrates client
   authentication using a JWT during the presentation of an
   authorization code grant in an Access Token Request (with extra line
   breaks for display purposes only):

     POST /token.oauth2 HTTP/1.1
     Host: as.example.com
     Content-Type: application/x-www-form-urlencoded

     grant_type=authorization_code&
     code=vAZEIHjQTHuGgaSvyW9hO0RpusLzkvTOww3trZBxZpo&
     client_assertion_type=urn%3Aietf%3Aparams%3Aoauth%3A
     client-assertion-type%3Ajwt-bearer&
     client_assertion=eyJhbGciOiJSUzI1NiJ9.
     eyJpc3Mi[...omitted for brevity...].
     cC4hiUPo[...omitted for brevity...]

3.  JWT Format and Processing Requirements

   In order to issue an access token response as described in The OAuth
   2.0 Authorization Framework [RFC6749] or to rely on a JWT for client
   authentication, the authorization server MUST validate the JWT
   according to the criteria below.  Application of additional
   restrictions and policy are at the discretion of the authorization
   server.

Jones, et al.             Expires June 30, 2013                 [Page 5]
Internet-Draft       OAuth JWT Bearer Token Profiles       December 2012

   o  The JWT MUST contain an "iss" (issuer) claim that contains a
      unique identifier for the entity that issued the JWT.

   o  The JWT MUST contain a "sub" (subject) claim identifying the
      subject of the transaction.  The subject MAY identify the resource
      owner for whom the access token is being requested.  For client
      authentication, the subject MUST be the "client_id" of the OAuth
      client.  When using a JWT as an authorization grant, the subject
      SHOULD identify an authorized accessor for whom the access token
      is being requested (typically the resource owner, or an authorized
      delegate).

   o  The JWT MUST contain an "aud" (audience) claim containing an
      audience value that identifies the authorization server, or the
      service provider principal entity of its controlling domain, as an
      intended audience.  The token endpoint URL of the authorization
      server MAY be used as an acceptable value for an "aud" element.
      The authorization server MUST verify that it is an intended
      audience for the JWT.

   o  The JWT MUST contain an "exp" (expiration) claim that limits the
      time window during which the JWT can be used.  The authorization
      server MUST verify that the expiration time has not passed,
      subject to allowable clock skew between systems.  The
      authorization server MAY reject JWTs with an "exp" claim value
      that is unreasonably far in the future.

   o  The JWT MAY contain an "nbf" (not before) claim that identifies
      the time before which the token MUST NOT be accepted for
      processing.

   o  The JWT MAY contain an "iat" (issued at) claim that identifies the
      time at which the JWT was issued.  The authorization server MAY
      reject JWTs with an "iat" claim value that is unreasonably far in
      the past.

   o  The JWT MAY contain a "jti" (JWT ID) claim that provides a unique
      identifier for the token.  The authorization server MAY ensure
      that JWTs are not replayed by maintaining the set of used "jti"
      values for the length of time for which the JWT would be
      considered valid based on the applicable "exp" instant.

   o  The JWT MAY contain other claims.

   o  The JWT MUST be digitally signed by the issuer and the
      authorization server MUST verify the signature.

Jones, et al.             Expires June 30, 2013                 [Page 6]
Internet-Draft       OAuth JWT Bearer Token Profiles       December 2012

   o  The authorization server MUST verify that the JWT is valid in all
      other respects per JSON Web Token (JWT) [JWT].

3.1.  Authorization Grant Processing

   If present, the authorization server MUST also validate the client
   credentials.

   If the JWT is not valid, or the current time is not within the
   token's valid time window for use, the authorization server MUST
   construct an error response as defined in OAuth 2.0 [RFC6749].  The
   value of the "error" parameter MUST be the "invalid_grant" error
   code.  The authorization server MAY include additional information
   regarding the reasons the JWT was considered invalid using the
   "error_description" or "error_uri" parameters.

   For example:

     HTTP/1.1 400 Bad Request
     Content-Type: application/json
     Cache-Control: no-store

     {
      "error":"invalid_grant",
      "error_description":"Audience validation failed"
     }

3.2.  Client Authentication Processing

   If the client JWT is not valid, or its subject confirmation
   requirements cannot be met, the authorization server MUST construct
   an error response as defined in OAuth 2.0 [RFC6749].  The value of
   the "error" parameter MUST be the "invalid_client" error code.  The
   authorization server MAY include additional information regarding the
   reasons the JWT was considered invalid using the "error_description"
   or "error_uri" parameters.

4.  Authorization Grant Example

   Though non-normative, the following examples illustrate what a
   conforming JWT and access token request would look like.

Jones, et al.             Expires June 30, 2013                 [Page 7]
Internet-Draft       OAuth JWT Bearer Token Profiles       December 2012

   Below is an example JSON object that could be encoded to produce the
   JWT Claims Object for a JWT:

     {"iss":"https://jwt-idp.example.com",
      "sub":"mailto:mike@example.com",
      "aud":"https://jwt-rp.example.net",
      "nbf":1300815780,
      "exp":1300819380,
      "http://claims.example.com/member":true}

   The following example JSON object, used as the header of a JWT,
   declares that the JWT is signed with the ECDSA P-256 SHA-256
   algorithm.

     {"alg":"ES256"}

   To present the JWT with the claims and header shown in the previous
   example as part of an access token request, for example, the client
   might make the following HTTPS request (with extra line breaks for
   display purposes only):

     POST /token.oauth2 HTTP/1.1
     Host: authz.example.net
     Content-Type: application/x-www-form-urlencoded

     grant_type=urn%3Aietf%3Aparams%3Aoauth%3Agrant-type%3Ajwt-bearer
     &assertion=eyJhbGciOiJFUzI1NiJ9.
     eyJpc3Mi[...omitted for brevity...].
     J9l-ZhwP[...omitted for brevity...]

5.  Security Considerations

   No additional security considerations apply beyond those described
   within The OAuth 2.0 Authorization Framework [RFC6749], the Assertion
   Framework for OAuth 2.0 [I-D.ietf-oauth-assertions], and the JSON Web
   Token (JWT) [JWT] specification.

6.  IANA Considerations

6.1.  Sub-Namespace Registration of
      urn:ietf:params:oauth:grant-type:jwt-bearer

   This specification registers the value "grant-type:jwt-bearer" in the
   IANA urn:ietf:params:oauth registry established in An IETF URN Sub-
   Namespace for OAuth [RFC6755].

Jones, et al.             Expires June 30, 2013                 [Page 8]
Internet-Draft       OAuth JWT Bearer Token Profiles       December 2012

   o  URN: urn:ietf:params:oauth:grant-type:jwt-bearer

   o  Common Name: JWT Bearer Token Grant Type Profile for OAuth 2.0

   o  Change controller: IETF

   o  Specification Document: [[this document]]

6.2.  Sub-Namespace Registration of
      urn:ietf:params:oauth:client-assertion-type:jwt-bearer

   This specification registers the value
   "client-assertion-type:jwt-bearer" in the IANA urn:ietf:params:oauth
   registry established in An IETF URN Sub-Namespace for OAuth
   [RFC6755].

   o  URN: urn:ietf:params:oauth:client-assertion-type:jwt-bearer

   o  Common Name: JWT Bearer Token Profile for OAuth 2.0 Client
      Authentication

   o  Change controller: IETF

   o  Specification Document: [[this document]]

7.  References

7.1.  Normative References

   [I-D.ietf-oauth-assertions]
              Campbell, B., Mortimore, C., Jones, M., and Y. Goland,
              "Assertion Framework for OAuth 2.0",
              draft-ietf-oauth-assertions-08 (work in progress),
              November 2012.

   [JWT]      Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token
              (JWT)", draft-ietf-oauth-json-web-token (work in
              progress), December 2012.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC4627]  Crockford, D., "The application/json Media Type for
              JavaScript Object Notation (JSON)", RFC 4627, July 2006.

   [RFC6749]  Hardt, D., "The OAuth 2.0 Authorization Framework",
              RFC 6749, October 2012.

Jones, et al.             Expires June 30, 2013                 [Page 9]
Internet-Draft       OAuth JWT Bearer Token Profiles       December 2012

   [RFC6755]  Campbell, B. and H. Tschofenig, "An IETF URN Sub-Namespace
              for OAuth", RFC 6755, October 2012.

7.2.  Informative References

   [I-D.ietf-oauth-saml2-bearer]
              Campbell, B. and C. Mortimore, "SAML 2.0 Bearer Assertion
              Profiles for OAuth 2.0", draft-ietf-oauth-saml2-bearer-15
              (work in progress), November 2012.

Appendix A.  Acknowledgements

   This profile was derived from SAML 2.0 Bearer Assertion Profiles for
   OAuth 2.0 [I-D.ietf-oauth-saml2-bearer] by Brian Campbell and Chuck
   Mortimore.

Appendix B.  Document History

   [[ to be removed by the RFC editor before publication as an RFC ]]

   -04

   o  Changed the name of the "prn" claim to "sub" (subject) both to
      more closely align with SAML name usage and to use a more
      intuitive name.

   o  Added seriesInfo information to Internet Draft references.

   -03

   o  Reference RFC 6749 and RFC 6755.

   -02

   o  Add more text to intro explaining that an assertion/JWT grant type
      can be used with or without client authentication/identification
      and that client assertion/JWT authentication is nothing more than
      an alternative way for a client to authenticate to the token
      endpoint

   o  Add examples to Sections 2.1 and 2.2

   o  Update references

   -01

Jones, et al.             Expires June 30, 2013                [Page 10]
Internet-Draft       OAuth JWT Bearer Token Profiles       December 2012

   o  Tracked specification name changes: "The OAuth 2.0 Authorization
      Protocol" to "The OAuth 2.0 Authorization Framework" and "OAuth
      2.0 Assertion Profile" to "Assertion Framework for OAuth 2.0".

   o  Merged in changes between draft-ietf-oauth-saml2-bearer-11 and
      draft-ietf-oauth-saml2-bearer-13.  All changes were strictly
      editorial.

   -00

   o  Created the initial IETF draft based upon
      draft-jones-oauth-jwt-bearer-04 with no normative changes.

Authors' Addresses

   Michael B. Jones
   Microsoft

   Email: mbj@microsoft.com
   URI:   http://self-issued.info/

   Brian Campbell
   Ping Identity Corp.

   Email: brian.d.campbell@gmail.com

   Chuck Mortimore
   Salesforce

   Email: cmortimore@salesforce.com

Jones, et al.             Expires June 30, 2013                [Page 11]