Reciprocal OAuth
draft-ietf-oauth-reciprocal-02
The information below is for an old version of the document.
| Document | Type | Active Internet-Draft (oauth WG) | |
|---|---|---|---|
| Author | Dick Hardt | ||
| Last updated | 2019-07-03 | ||
| Stream | Internet Engineering Task Force (IETF) | ||
| Formats | plain text xml htmlized pdfized bibtex | ||
| Stream | WG state | WG Document | |
| Document shepherd | (None) | ||
| IESG | IESG state | I-D Exists | |
| Consensus boilerplate | Unknown | ||
| Telechat date | (None) | ||
| Responsible AD | (None) | ||
| Send notices to | (None) |
draft-ietf-oauth-reciprocal-02
OAuth Working Group D. Hardt
Internet-Draft July 03, 2019
Intended status: Standards Track
Expires: January 4, 2020
Reciprocal OAuth
draft-ietf-oauth-reciprocal-02
Abstract
There are times when a user has a pair of protected resources that
would like to request access to each other. While OAuth flows
typically enable the user to grant a client access to a protected
resource, granting the inverse access requires an additional flow.
Reciprocal OAuth enables a more seamless experience for the user to
grant access to a pair of protected resources.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on January 4, 2020.
Copyright Notice
Copyright (c) 2019 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
Hardt Expires January 4, 2020 [Page 1]
Internet-Draft Reciprocal OAuth July 2019
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
1. Introduction
In the usual three legged, authorization code grant, the OAuth flow
enables a resource owner (user) to enable a client (party A) to be
granted authorization to access a protected resource (party B). If
party A also has a protected resource that the user would like to let
party B access, then a second complete OAuth flow, but in the reverse
direction, must be performed. In practice, this is a complicated
user experience as the user is at Party A, but the OAuth flow needs
to start from Party B. This requires the second flow to send the
user back to party B, which then sends the user to Party A as the
first step in the flow. At the end, the user is at Party B, even
though the original flow started at Party A.
Reciprocal OAuth simplifies the user experience by eliminating the
redirections in the second OAuth flow. After the intial OAuth flow,
party A obtains consent from the user to grant party B access to a
protected resource at party A, and then passes an authorization code
to party B using the access token party A obtained from party B to
provide party B the context of the user. Party B then exchanges the
authorization code for an access token per the usual OAuth flow.
1.1. Terminology
In this document, the key words "MUST", "MUST NOT", "REQUIRED",
"SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY",
and "OPTIONAL" are to be interpreted as described in BCP 14, RFC 2119
[RFC2119].
2. Reciprocol Protocol Flow
Hardt Expires January 4, 2020 [Page 2]
Internet-Draft Reciprocal OAuth July 2019
Party A Party B
+---------------+ +---------------+
| |--(A)- Authorization Request ->| Resource |
| | | Owner B |
| |<-(B)-- Authorization Grant ---| |
| | +---------------+
| Client A |
| | +---------------+
| |--(C)-- Authorization Grant -->| |
| | | Authorization |
| |<-(D)---- Access Token B ------| Server B |
| | Reciprocol Request | |
+---------------+ +---------------+
|
Reciprocol Request
V
+---------------+ +---------------+
| Resource | | Authorization |
| Owner A |--(E)--- Reciprocol Grant ---->| Server B |
| | Access Token B | |
+---------------+ +---------------+
|
Reciprocol Grant
V
+---------------+ +---------------+
| |<-(F)--- Reciprocol Grant -----| |
| Authorization | | Client B |
| Server A |--(G)---- Access Token A ----->| |
+---------------+ +---------------+
Figure 1: Abstract Reciprocol Protocol Flow
The reciprocol authorization between party A and party B are
abstractly represented in Figure 1 and includes the following steps:
o (A - C) are the same as in [RFC6749] 1.2
o (D) Party B optionally includes the reciprocol scope in the
response.
See Section 2.1 for details.
o (E) Party A sends the reciprocol authorization grant to party B.
See Section 2.2.2 for details.
o (F) Party B requests an access token, mirroring step (B)
o (G) Party A issues an access token, mirroring step (C)
Hardt Expires January 4, 2020 [Page 3]
Internet-Draft Reciprocal OAuth July 2019
2.1. Reciprocal Scope Request
When party B is providing an access token response per [RFC6749]
4.1.4, 4.2.1, 4.3.3 or 4.4.3, party B MAY include an additional query
component in the redirection URI to indicate the scope requested in
the reciprocal grant:
reciprocal OPTIONAL
The scope of party B's reciprocal access request per [RFC6749] 3.3.
If party B does not provide a reciprocal parameter in the access
token response, the reciprocal scope will be a value previously
preconfigured by party A and party B.
If an authorization code grant access token response per [RFC6749]
4.1.4, an example successful response (with extra line breaks for
display purposes only):
HTTP/1.1 200 OK
Content-Type: application/json;charset=UTF-8
Cache-Control: no-store
Pragma: no-cache
{
"access_token":"2YotnFZFEjr1zCsicMWpAA",
"token_type":"example",
"expires_in":3600,
"refresh_token":"tGzv3JOkF0XG5Qx2TlKWIA",
"reciprocal":"example_scope",
"example_parameter":"example_value"
}
If an authorization code grant access token response per [RFC6749]
4.2.2, an example successful response (with extra line breaks for
display purposes only):
HTTP/1.1 302 Found
Location: http://example.com/cb#
access_token=2YotnFZFEjr1zCsicMWpAA&
state=xyz&
token_type=example&
expires_in=3600&
reciprocal="example_scope"
When party B is providing an authorization response per [RFC6749]
4.1.2, party B MAY include an additional query component in the
redirection URI to indicate the scope requested in the reciprocal
grant.
Hardt Expires January 4, 2020 [Page 4]
Internet-Draft Reciprocal OAuth July 2019
reciprocal OPTIONAL. The scope of party B's reciprocal access
request per [RFC6749] 3.3.
If party B does not provide a reciprocal parameter in the
authorization response, the reciprocal scope will be a value
previously preconfigured by party A and party B.
2.2. Reciprocal Authorization Flow
The reciprocal authorization flow starts after the client (party A)
has obtained an access token from the authorization server (party B)
per [RFC6749] 4.1 Authorization Code Grant.
2.2.1. User Consent
Party A obtains consent from the user to grant Party B access to
protected resources at party A. The consent represents the scopes
requested by party B from party A per Section 2.1.
2.2.2. Reciprocal Authorization Code
Party A generates an authorization code representing the access
granted to party B by the user. Party A then makes a request to
party B's token endpoint authenticating per [RFC6749] 2.3 and sending
the following parameters using the "application/x-www-form-
urlencoded" format per [RFC6749] Appendix B with a character encoding
of UTF-8 in the HTTP request entity-body:
grant_type REQUIRED
Value MUST be set to "urn:ietf:params:oauth:grant-type:reciprocal".
code REQUIRED
the authorization code generated by party A.
client_id REQUIRED
party A'a client ID.
access_token REQUIRED the access token obtained from Party B. Used
by Party B to identify which user authorization is being requested.
For example, the client makes the following HTTP request using TLS
(with extra line breaks for display purposes only):
Hardt Expires January 4, 2020 [Page 5]
Internet-Draft Reciprocal OAuth July 2019
POST /token HTTP/1.1
Host: server.example.com
Authorization: Basic ej4hsyfishwssjdusisdhkjsdksusdhjkjsdjk
Content-Type: application/x-www-form-urlencoded
grant_type=urn%3Aietf%3Aparams%3Aoauth%3Agrant-type%3reciprocal
&code=hasdyubasdjahsbdkjbasd
&client_id=example.com
&access_token=sadadojsadlkjasdkljxxlkjdas
Party B MUST verify the authentication provided by Party A per
[RFC6749] 2.3
Party B MUST then verify the access token was granted to the client
identified by the client_id.
Party B MUST respond with either an HTTP 200 (OK) response if the
request is valid, or an HTTP 400 "Bad Request" if it is not.
Party B then plays the role of the client to make an access token
request per [RFC6749] 4.1.3.
3. Authorization Update Flow
After the initial authorization, the user may add or remove scopes
available to the client at the authorization server. For example,
the user may grant additional scopes to the client using a voice
interface, or revoke some scopes. The authorization server can
update the client with the new authorization by sending a new
authorization code per Section 2.2.2.
4. IANA Considerations
TBD.
5. Acknowledgements
TBD.
6. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>.
Hardt Expires January 4, 2020 [Page 6]
Internet-Draft Reciprocal OAuth July 2019
[RFC6749] Hardt, D., Ed., "The OAuth 2.0 Authorization Framework",
RFC 6749, DOI 10.17487/RFC6749, October 2012,
<https://www.rfc-editor.org/info/rfc6749>.
[RFC6750] Jones, M. and D. Hardt, "The OAuth 2.0 Authorization
Framework: Bearer Token Usage", RFC 6750,
DOI 10.17487/RFC6750, October 2012,
<https://www.rfc-editor.org/info/rfc6750>.
Appendix A. Document History
A.1. draft-ietf-oauth-reciprical-00
o Initial version.
A.2. draft-ietf-oauth-reciprical-01
o Changed reciprocal scope request to be in access token response
rather than authorization request
A.3. draft-ietf-oauth-reciprical-02
o Added in diagram to clarify protocol flow
Author's Address
Dick Hardt
Email: dick.hardt@gmail.com
Hardt Expires January 4, 2020 [Page 7]