Skip to main content

PCEP Extensions for PCE-initiated LSP Setup in a Stateful PCE Model
draft-ietf-pce-pce-initiated-lsp-00

The information below is for an old version of the document.
Document Type Expired Internet-Draft (pce WG)
Authors Edward Crabbe , Ina Minei , Siva Sivabalan , Robert Varga
Last updated 2014-06-06 (Latest revision 2013-12-03)
Stream Internet Engineering Task Force (IETF)
Formats
Expired & archived
plain text htmlized pdfized bibtex
Reviews
Stream WG state WG Document
Document shepherd (None)
IESG IESG state Expired
Consensus boilerplate Unknown
Telechat date (None)
Responsible AD (None)
Send notices to (None)
This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at:
https://www.ietf.org/archive/id/draft-ietf-pce-pce-initiated-lsp-00.txt

Abstract

The Path Computation Element Communication Protocol (PCEP) provides mechanisms for Path Computation Elements (PCEs) to perform path computations in response to Path Computation Clients (PCCs) requests. The extensions described in [I-D.ietf-pce-stateful-pce] provide stateful control of Multiprotocol Label Switching (MPLS) Traffic Engineering Label Switched Paths (TE LSP) via PCEP, for a model where the PCC delegates control over one or more locally configured LSPs to the PCE. This document describes the creation and deletion of PCE- initiated LSPs under the stateful PCE model.

Authors

Edward Crabbe
Ina Minei
Siva Sivabalan
Robert Varga

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)