Pseudowire Redundancy on S-PE
draft-ietf-pwe3-redundancy-spe-00
Document | Type |
This is an older version of an Internet-Draft whose latest revision state is "Replaced".
Expired & archived
|
|
---|---|---|---|
Authors | Jie Dong , Haibo Wang | ||
Last updated | 2013-06-17 (Latest revision 2012-12-14) | ||
Replaces | draft-dong-pwe3-redundancy-spe | ||
Replaced by | draft-ietf-pals-redundancy-spe, RFC 7795 | ||
RFC stream | Internet Engineering Task Force (IETF) | ||
Formats | |||
Additional resources | Mailing list discussion | ||
Stream | WG state | WG Document | |
Document shepherd | (None) | ||
IESG | IESG state | Expired | |
Consensus boilerplate | Unknown | ||
Telechat date | (None) | ||
Responsible AD | (None) | ||
Send notices to | (None) |
This Internet-Draft is no longer active. A copy of the expired Internet-Draft is available in these formats:
Abstract
This document describes Multi-Segment Pseudowire (MS-PW) protection scenarios in which the pseudowire redundancy is provided on the Switching-PE (S-PE). Operations of the S-PEs which provide PW redundancy are specified. Signaling of the preferential forwarding status as defined in [I-D.ietf-pwe3-redundancy-bit] is reused. This document does not require any change to the T-PEs of MS-PW.
Authors
(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)