RADIUS Attributes for IEEE 802 Networks
draft-ietf-radext-ieee802ext-05

The information below is for an old version of the document
Document Type Active Internet-Draft (radext WG)
Last updated 2013-04-17
Stream IETF
Intended RFC status (None)
Formats plain text pdf html
Stream WG state WG Consensus: Waiting for Write-Up
Other - see Comment Log
Document shepherd Jouni Korhonen
IESG IESG state I-D Exists
Telechat date
Responsible AD (None)
Send notices to (None)
RADEXT Working Group                                       Bernard Aboba
INTERNET-DRAFT                                                     Skype
Category: Proposed Standard                                Jouni Malinen
Expires: October 21, 2013                           Devicescape Software
Updates: 4072                                               Paul Congdon
                                                 Hewlett Packard Company
                                                          Joseph Salowey
                                                           Cisco Systems
                                                              Mark Jones
                                                           Azuca Systems
                                                           17 April 2013

                RADIUS Attributes for IEEE 802 Networks
                  draft-ietf-radext-ieee802ext-05.txt

Abstract

   RFC 3580 provides guidelines for the use of the Remote Authentication
   Dialin User Service (RADIUS) within IEEE 802 local area networks
   (LANs).  This document proposes additional attributes for use within
   IEEE 802 networks, as well as clarifications on the usage of the EAP-
   Key-Name attribute, updating RFC 4072.  The attributes defined in
   this document are usable both within RADIUS and Diameter.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on October 21, 2013.

Aboba, et al.               Proposed Standard                   [Page 1]
INTERNET-DRAFT       RADIUS Attributes for IEEE 802        17 April 2013

Copyright Notice

   Copyright (c) 2013 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

   This document may contain material from IETF Documents or IETF
   Contributions published or made publicly available before November
   10, 2008.  The person(s) controlling the copyright in some of this
   material may not have granted the IETF Trust the right to allow
   modifications of such material outside the IETF Standards Process.
   Without obtaining an adequate license from the person(s) controlling
   the copyright in such materials, this document may not be modified
   outside the IETF Standards Process, and derivative works of it may
   not be created outside the IETF Standards Process, except to format
   it for publication as an RFC or to translate it into languages other
   than English.

Aboba, et al.               Proposed Standard                   [Page 2]
INTERNET-DRAFT       RADIUS Attributes for IEEE 802        17 April 2013

Table of Contents

1.     Introduction ..........................................    4
   1.1       Terminology .....................................    4
   1.2       Requirements Language ...........................    5
2.     RADIUS attributes .....................................    5
   2.1       Allowed-Called-Station-Id .......................    5
   2.2       EAP-Key-Name ....................................    7
   2.3       EAP-Peer-Id .....................................    8
   2.4       EAP-Server-Id ...................................    9
   2.5       Mobility-Domain-Id ..............................   10
   2.6       Preauth-Timeout .................................   10
   2.7       Network-Id-Name .................................   11
   2.8       Access-Info .....................................   13
   2.9       WLAN-SSID .......................................   13
Show full document text