A Media Type for Reputation Interchange
draft-ietf-repute-media-type-01
The information below is for an old version of the document.
| Document | Type | Active Internet-Draft (repute WG) | |
|---|---|---|---|
| Authors | Dr. Nathaniel S. Borenstein , Murray Kucherawy | ||
| Last updated | 2011-12-16 (Latest revision 2011-11-20) | ||
| Replaces | draft-kucherawy-reputation-media-type | ||
| Stream | Internet Engineering Task Force (IETF) | ||
| Formats | plain text htmlized pdfized bibtex | ||
| Reviews |
GENART Last Call review
(of
-10)
Ready with Issues
|
||
| Stream | WG state | WG Document | |
| Document shepherd | (None) | ||
| IESG | IESG state | AD is watching | |
| Consensus boilerplate | Unknown | ||
| Telechat date | (None) | ||
| Responsible AD | Pete Resnick | ||
| Send notices to | repute-chairs@tools.ietf.org, draft-ietf-repute-media-type@tools.ietf.org |
draft-ietf-repute-media-type-01
REPUTE Working Group N. Borenstein
Internet-Draft Mimecast
Intended status: Standards Track M. Kucherawy
Expires: July 16, 2012 Cloudmark
January 13, 2012
A Media Type for Reputation Interchange
draft-ietf-repute-media-type-01
Abstract
This document defines a media type for exchanging reputation
information about an arbitrary class of object.
Status of this Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on July 16, 2012.
Copyright Notice
Copyright (c) 2012 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Borenstein & Kucherawy Expires July 16, 2012 [Page 1]
Internet-Draft Reputation Media Type January 2012
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
2. Terminology and Definitions . . . . . . . . . . . . . . . . . 3
2.1. Keywords . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.2. Other Definitions . . . . . . . . . . . . . . . . . . . . 3
3. Description . . . . . . . . . . . . . . . . . . . . . . . . . 3
3.1. XML Schema . . . . . . . . . . . . . . . . . . . . . . . . 6
3.2. Example Reply . . . . . . . . . . . . . . . . . . . . . . 7
4. Scores . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 8
5.1. application/reputon Media Type Registration . . . . . . . 8
5.2. Reputation Applications Registry . . . . . . . . . . . . . 9
6. Security Considerations . . . . . . . . . . . . . . . . . . . 10
7. References . . . . . . . . . . . . . . . . . . . . . . . . . . 11
7.1. Normative References . . . . . . . . . . . . . . . . . . . 11
7.2. Informative References . . . . . . . . . . . . . . . . . . 11
Appendix A. Acknowledgments . . . . . . . . . . . . . . . . . . . 11
Appendix B. Public Discussion . . . . . . . . . . . . . . . . . . 12
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 12
Borenstein & Kucherawy Expires July 16, 2012 [Page 2]
Internet-Draft Reputation Media Type January 2012
1. Introduction
This memo defines a media type for use when answering a reputation
query using the "long form" query defined in [I-D.REPUTE-QUERY-HTTP],
which uses [HTTP]. It is part of a series defining the overall
reputation query/response structure as well as the concept of
reputation "vocabularies" for particular applications.
Also included is the specification for an IANA registry to contain
definitions and symbolic names for known reputation vocabularies.
2. Terminology and Definitions
This section defines terms used in the rest of the document.
2.1. Keywords
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [KEYWORDS].
2.2. Other Definitions
Other terms of importance in this memo are defined in
[I-D.REPUTE-MODEL], the base memo in this document series.
3. Description
A new media type, "application/reputon", is defined for the
representation of reputational data, typically in response to a
client making a request for such data about some subject. This media
type has one optional parameter, "app", which conveys the specific
application of reputation data in use, and may extend the set of data
values that can be included in the media object itself.
The body of the media type consists of an Extended Markup Language
(XML) document that contains the reputation information requested.
An XML schema is included in a later section of this document.
The key pieces of data found in a reputon for all reputation
applications are defined as follows:
RATER: The identity of the entity providing the reputation
information, generally expressed as a DNS domain name.
Borenstein & Kucherawy Expires July 16, 2012 [Page 3]
Internet-Draft Reputation Media Type January 2012
ASSERTION: A keyword indicating the specific assertion or claim
being rated. In the absence of an "app" parameter, the reputon
can only indicate generic goodness, with the default assertion
"IS-GOOD," but each application is expected to define additional
ASSERTIONs.
RATED: The identity of the entity being rated.
RATING: The overall rating score for that entity, expressed as a
floating-point number between 0.0 and 1.0 inclusive. See
Section 4 for discussion.
The following are OPTIONAL for all applications, to be used in
contexts where they are appropriate:
CONFIDENCE: The level of confidence the reputation provider has in
the value presented being accurate, expressed as a floating-point
number between 0.0 and 1.0 inclusive.
EXTENSION: Contains application-specific extension data. It MUST
NOT be present unless the reputon was introduced using the "app"
parameter to identify a specific reputation application. Valid
values are established by registration of application-specific
extensions with IANA (see Section 5.2).
RATER-AUTHENTICITY: The level of confidence in that identity being
genuine, expressed as a floating-point number between 0.0 and 1.0
inclusive.
SAMPLE-SIZE: The number of data points used to compute that score,
possibly an approximation. Expressed as an unsigned 64-bit
integer. The units are deliberately not specified, since not all
reputation service providers will collect data the same way.
Consumers will need to determine out-of-band the units being
reported and apply this value accordingly within their local
policies.
UPDATED: A timestamp indicating when this value was generated.
Expressed as the number of seconds since January 1, 1970 00:00
UTC.
A particular application that registers itself with IANA MAY also
define extension attribute/value pairs beyond these standard ones.
Thus, the following simple example (using simple text rather than XML
for brevity):
Borenstein & Kucherawy Expires July 16, 2012 [Page 4]
Internet-Draft Reputation Media Type January 2012
Content-type: application/reputon
RATER: RatingsRUs.example.com
RATER-AUTHENTICITY: 1.0
ASSERTION: IS-GOOD
RATED: Alex Rodriguez
RATING: 0.99
SAMPLE-SIZE: 50000
...indicates we are absolutely sure (1.0) that the entity
"RatingsRUs.example.com" consolidated 50000 data points (perhaps from
everyone in Yankee Stadium) and concluded that Alex Rodriguez is very
very good (0.99) at something. It doesn't tell us what he's good at,
and while it might be playing baseball, it could just as well be
paying his taxes on time.
A more sophisticated usage would define a baseball application with a
vocabulary of specific assertions, so that this example:
Content-type: application/reputon; app="baseball"
RATER: baseball-reference.example.com
RATER-AUTHENTICITY: 1.0
ASSERTION: HITS-FOR-POWER
RATED: Alex Rodriguez
RATING: 0.99
SAMPLE-SIZE: 50000
...would indicate that 50000 fans polled by the entity baseball-
reference.example.com rate A-Rod very highly in hitting for power,
whereas this example:
Content-type: application/reputon; app="baseball"
RATER: baseball-reference.example.com
RATER-AUTHENTICITY: 1.0
ASSERTION: CLUTCH-HITTER
RATED: Alex Rodriguez
RATING: 0.4
SAMPLE-SIZE: 50000
...would indicate that a similar poll indicated a somewhat weaker
consensus that A-Rod tends to choke in critical baseball situations.
In practice, most usage of reputons is expected to make use of the
"app" parameter to target an application-specific set of assertions.
Borenstein & Kucherawy Expires July 16, 2012 [Page 5]
Internet-Draft Reputation Media Type January 2012
3.1. XML Schema
The following XML schema describes the format of the reply:
<?xml version="1.0" encoding="ISO-8859-1" ?%gt;
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema">
<!-- definition of local types -->
<xs:simpleType name="exttype">
<xs:restriction base="xs:token">
<xs:pattern value="\w+(-\w*)*:\s?[\w\p{P}]+"/>
<xs:/restriction>
<xs:/simpleType>
<!-- definition of simple elements -->
<xs:element name="rater" type="xs:token"/>
<xs:element name="rater-authenticity" type="xs:decimal"/>
<xs:element name="assertion" type="xs:token"/>
<xs:element name="extension" type="exttype"/>
<xs:element name="rated" type="xs:token"/>
<xs:element name="rating" type="xs:decimal"/>
<xs:element name="confidence" type="xs:decimal"/>
<xs:element name="sample-size" type="xs:positiveInteger"/>
<xs:element name="updated" type="xs:positiveInteger"/>
<!-- definition of complex elements -->
<xs:complexType name="assertiontype">
<xs:sequence>
<xs:element ref="rater" minOccurs="1"/>
<xs:element ref="rater-authenticity" minOccurs="1"/>
<xs:element ref="assertion" minOccurs="1"/>
<xs:element ref="extension"/>
<xs:element ref="rated" minOccurs="1"/>
<xs:element ref="rating" minOccurs="1"/>
<xs:element ref="confidence" minOccurs="1"/>
<xs:element ref="sample-size" minOccurs="1"/>
<xs:element ref="updated" minOccurs="1"/>
<xs:/sequence>
<xs:/complexType>
<xs:complexType name="reporttype">
<xs:sequence>
<xs:element name="reputon" type="assertiontype"
maxOccurs="unbounded" minOccurs="1"/>
<xs:/sequence>
<xs:/complexType>
<xs:element name="reputation" type="reporttype"/>
Borenstein & Kucherawy Expires July 16, 2012 [Page 6]
Internet-Draft Reputation Media Type January 2012
</xs:schema>
3.2. Example Reply
The following is an example reputon generated using this schema,
including the media type definition line:
Content-Type: application/reputon; app="email"
<?xml version="1.0" encoding="US-ASCII"?>
<reputation>
<reputon>
<rater>rep.example.net</rater>
<rater-authenticity>0.95</rater-authenticity>
<assertion>SENDS-SPAM</assertion>
<extension>IDENTITY: DKIM</extension>
<rated>example.com</rated>
<rating>0.0012</rating>
<sample-size>16938213</sample-size>
<updated>1317795852</updated>
</reputon>
</reputation>
Here, reputation agent "rep.example.net" is asserting within the
context of email that "example.com" appears to send spam 1.2% of the
time, based on just short of 17 million messages analyzed or reported
to date. The identity "example.com", the subject of the query, is
extracted from the analyzed messages using the [DKIM] "d=" parameter
for messages where signatures validate. The reputation agent is 95%
confident of this result. (See [I-D.REPUTE-EMAIL-IDENTIFIERS] for
details about the registered email identifiers vocabulary.)
4. Scores
The score presented as the value in the RATING parameter appears as a
floating point value between 0.0 and 1.0 inclusive. The intent is
that the definition of an assertion within an application will
declare what the anchor values 0.0 and 1.0 specifically mean.
Generally speaking, 1.0 implies full agreement with the assertion,
while 0.0 indicates no support for the assertion.
The definition will also specify the type of scale in use when
generating scores, to which all reputation service providers for that
application space must adhere. This will allow a client to change
which reputation service provider is being queried for a given
without having to learn through some out-of-band method what the new
Borenstein & Kucherawy Expires July 16, 2012 [Page 7]
Internet-Draft Reputation Media Type January 2012
provider's values mean. For example, a registration might state that
ratings are linear, which would mean a score of "x" is twice as
strong as a value of "x/2".
5. IANA Considerations
This memo presents two actions for IANA, namely the creation of the
new media type "application/reputon" and the creation of a registry
for reputation application types. Another memo in this series
creates an initial registry entry for the latter.
5.1. application/reputon Media Type Registration
This section provides the media type registration application from
[MIME-REG] for processing by IANA:
To: ietf-types@iana.org
Subject: Registration of media type application/reputon
Type name: application
Subtype name: reputon
Required parameters: none
Optional parameters:
app: Names the reputation application in use within the reputon,
which defines the valid assertions and any extensions that may
also be valid (i.e., the vocabulary) for that application.
These MUST be registered with IANA.
Encoding considerations: "7bit" encoding is sufficient and MUST be
used to maintain readability when viewed by non-MIME mail readers.
Security considerations: See Section 6 of [this document].
Interoperability considerations: Implementers MUST ignore any "app"
values, attribute/value pairs, or vocabulary items they do not
support.
Published specification: [this document]
Borenstein & Kucherawy Expires July 16, 2012 [Page 8]
Internet-Draft Reputation Media Type January 2012
Applications that use this media type: Any application that wishes
to query a service that provides reputation data using the "long
form" defined in [I-D.REPUTE-QUERY-HTTP]. The example application
is one that provides reputation expressions about DNS domain names
found in email messages.
Additional information: The value of the "app" parameter MUST also
be registered with IANA.
Person and email address to contact for further information:
Nathaniel Borenstein <nps@guppylake.com>
Murray S. Kucherawy <msk@cloudmark.com>
Intended usage: COMMON
Author:
Nathaniel Borenstein
Murray S. Kucherawy
Change controller: IESG
5.2. Reputation Applications Registry
IANA is requested to create the "Reputation Applications" registry.
This registry will contain names of applications used with the
application/reputon media type, as defined by this memo.
New registrations or updates MUST be published in accordance with the
"Specification Required" guidelines as described in
[IANA-CONSIDERATIONS].
New registrations and updates MUST contain the following information:
1. Name of the application being registered or updated
2. Short description of the application (i.e., the class of entity
about which it reports reputation data)
3. The document in which the application is defined
4. New or updated status, which MUST be one of:
Borenstein & Kucherawy Expires July 16, 2012 [Page 9]
Internet-Draft Reputation Media Type January 2012
current: The application is in current use
deprecated: The application is in current use but its use is
discouraged
historic: The application is no longer in current use
5. An optional table of query parameters that are specific to this
application; each table entry must include:
Name: Name of the query parameter
Status: (as above)
Description: A short description of the purpose of this
parameter
Syntax: A reference to a description of valid syntax for the
parameter's value
Required: "yes" if the parameter is mandatory, "no" otherwise
A document creating a reputation application MUST include:
1. A list of one or more assertions registered within this
application; each table entry must include:
Name: Name of the assertion
Description: A short description of the assertion, with specific
meanings for values of 0.0 and 1.0
Scale: A short description of the scale used in computing the
value (see Section 4 of this memo)
6. Security Considerations
This memo describes security considerations introduced by the media
type defined here.
[TBD]
7. References
Borenstein & Kucherawy Expires July 16, 2012 [Page 10]
Internet-Draft Reputation Media Type January 2012
7.1. Normative References
[I-D.REPUTE-MODEL]
Borenstein, N. and M. Kucherawy, "A Model for Reputation
Interchange", I-D draft-kucherawy-reputation-model,
June 2011.
[I-D.REPUTE-QUERY-HTTP]
Borenstein, N. and M. Kucherawy, "Reputation Data
Interchange using HTTP and XML",
I-D draft-ietf-repute-query-http, November 2011.
[KEYWORDS]
Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
7.2. Informative References
[DKIM] Crocker, D., Ed., Hansen, T., Ed., and M. Kucherawy, Ed.,
"DomainKeys Identified Mail (DKIM) Signatures", RFC 6376,
September 2011.
[HTTP] Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.
[I-D.REPUTE-EMAIL-IDENTIFIERS]
Borenstein, N. and M. Kucherawy, "A Reputation Vocabulary
for Email Identifiers",
I-D draft-ietf-repute-email-identifiers, November 2011.
[IANA-CONSIDERATIONS]
Narten, T. and H. Alvestrand, "Guidelines for Writing an
IANA Considerations Section in RFCs", RFC 5226, May 2008.
[MIME-REG]
Freed, N. and J. Klensin, "Media Type Specifications and
Registration Procedures", RFC 4288, December 2005.
Appendix A. Acknowledgments
The authors wish to acknowledge the contributions of the following to
this specification: Frank Ellermann, Tony Hansen, Jeff Hodges, John
Levine, David F. Skoll, and Mykyta Yevstifeyev.
Borenstein & Kucherawy Expires July 16, 2012 [Page 11]
Internet-Draft Reputation Media Type January 2012
Appendix B. Public Discussion
Public discussion of this suite of memos takes place on the
domainrep@ietf.org mailing list. See
https://www.ietf.org/mailman/listinfo/domainrep.
Authors' Addresses
Nathaniel Borenstein
Mimecast
203 Crescent St., Suite 303
Waltham, MA 02453
USA
Phone: +1 781 996 5340
Email: nsb@guppylake.com
Murray S. Kucherawy
Cloudmark
128 King St., 2nd Floor
San Francisco, CA 94107
USA
Phone: +1 415 946 3800
Email: msk@cloudmark.com
Borenstein & Kucherawy Expires July 16, 2012 [Page 12]