A Media Type for Reputation Interchange
draft-ietf-repute-media-type-11

The information below is for an old version of the document
Document Type Active Internet-Draft (repute WG)
Last updated 2013-08-29
Replaces draft-kucherawy-reputation-media-type
Stream IETF
Intended RFC status Proposed Standard
Formats pdf htmlized (tools) htmlized bibtex
Reviews
Stream WG state Submitted to IESG for Publication
Document shepherd Dave Crocker
Shepherd write-up Show (last changed 2013-05-25)
IESG IESG state Waiting for AD Go-Ahead
Consensus Boilerplate Unknown
Telechat date
Responsible AD Pete Resnick
Send notices to repute-chairs@tools.ietf.org, draft-ietf-repute-media-type@tools.ietf.org
IANA IANA review state Version Changed - Review Needed
REPUTE Working Group                                       N. Borenstein
Internet-Draft                                                  Mimecast
Intended status: Standards Track                            M. Kucherawy
Expires: March 2, 2014                                   August 29, 2013

                A Media Type for Reputation Interchange
                    draft-ietf-repute-media-type-11

Abstract

   This document defines the format of reputation response data
   ("reputons"), the media-type for packaging it, and definition of a
   registry for the names of reputation applications and response sets.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on March 2, 2014.

Copyright Notice

   Copyright (c) 2013 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Borenstein & Kucherawy    Expires March 2, 2014                 [Page 1]
Internet-Draft            Reputation Media Type              August 2013

Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  Terminology and Definitions  . . . . . . . . . . . . . . . . .  3
     2.1.  Reputon  . . . . . . . . . . . . . . . . . . . . . . . . .  3
     2.2.  Key Words  . . . . . . . . . . . . . . . . . . . . . . . .  3
     2.3.  Other Definitions  . . . . . . . . . . . . . . . . . . . .  3
   3.  Description  . . . . . . . . . . . . . . . . . . . . . . . . .  3
     3.1.  Reputon Attributes . . . . . . . . . . . . . . . . . . . .  4
   4.  Ratings  . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
   5.  Caching  . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
   6.  Reputon Structure  . . . . . . . . . . . . . . . . . . . . . .  6
     6.1.  Syntax . . . . . . . . . . . . . . . . . . . . . . . . . .  6
       6.1.1.  Formal Definition  . . . . . . . . . . . . . . . . . .  6
     6.2.  Examples . . . . . . . . . . . . . . . . . . . . . . . . .  8
   7.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 10
     7.1.  application/reputon+json Media Type Registration . . . . . 10
     7.2.  Reputation Applications Registry . . . . . . . . . . . . . 11
   8.  Security Considerations  . . . . . . . . . . . . . . . . . . . 13
   9.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 13
     9.1.  Normative References . . . . . . . . . . . . . . . . . . . 13
     9.2.  Informative References . . . . . . . . . . . . . . . . . . 14
   Appendix A.  Acknowledgments . . . . . . . . . . . . . . . . . . . 14
   Appendix B.  Public Discussion . . . . . . . . . . . . . . . . . . 14
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 15

Borenstein & Kucherawy    Expires March 2, 2014                 [Page 2]
Internet-Draft            Reputation Media Type              August 2013

1.  Introduction

   This document defines a media type for use when answering a
   reputation query via the query method described in
   [I-D.REPUTE-QUERY-HTTP], which uses [HTTP].

   Also included is the specification for an IANA registry to contain
   definitions and symbolic names for known reputation applications and
   corresponding response sets.

2.  Terminology and Definitions

   This section defines terms used in the rest of the document.

2.1.  Reputon

   A "reputon" is a single independent object containing reputation
   information.  A particular query about a subject of interest will
   receive one or more reputons in response, depending on the nature of
   the data collected and reported by the server.

2.2.  Key Words

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [KEYWORDS].

2.3.  Other Definitions

   Other terms of importance in this document are defined in
   [I-D.REPUTE-MODEL], the base document in this document series.

3.  Description

   The meta-format selected for the representaton of a reputon is
   Javascript Object Notation (JSON), defined in [JSON].  Accordingly, a
   new media type, "application/reputon+json", is defined for the JSON
   representation of reputational data, typically in response to a
   client making a request for such data about some subject.  This media
   type has one optional parameter, "context", which names the semantic
   context (i.e., the specific sphere of reputation evaluation, or
   application) in which context the query is made and the response
   returned.  If the parameter is absent, a generic reputation query
   (i.e., one not associated with a specific reputation application) is
   assumed for which only a simple reply is allowed.

Borenstein & Kucherawy    Expires March 2, 2014                 [Page 3]
Internet-Draft            Reputation Media Type              August 2013

   The body of the media type consists of a JSON document that contains
   the reputation information requested.  A detailed description of the
   expected structure of the reply is provided below.

3.1.  Reputon Attributes

   The key pieces of data found in a reputon for all reputation
   applications are defined as follows:

   rater:  The identity of the entity providing the reputation
      information, typically expressed as a DNS domain name.

   assertion:  A keyword indicating the specific assertion or claim
      being rated.  In the absence of an "context" parameter on the
      media type, the reputon can only indicate generic goodness, with
      the default assertion "is-good", but each application is expected
      to define additional assertions.

   rated:  The identity of the entity being rated.  The nature of this
      field is application-specific; it could be domain names, email
      addresses, driver's license numbers, or anything that uniquely
      identifies the entity being rated.  Documents that define specific
      reputation applications are required to define syntax and
      semantics for this field.

   rating:  The overall rating score for that entity, expressed as a
      floating-point number between 0.0 and 1.0 inclusive.  See
      Section 4 for discussion.

   The following are OPTIONAL for all applications, to be used in
   contexts where they are appropriate:

   confidence:  the level of certainty the reputation provider has that
      the value presented is appropriate, expressed as a floating-point
      number between 0.0 and 1.0 inclusive.

   normal-rating:  An indication of what the reputation provider would
      normally expect as a rating for the subject.  This allows the
      client to note that the current rating is or is not in line with
      expectations.

   sample-size:  The number of data points used to compute the rating,
      possibly an approximation.  Expressed as an unsigned 64-bit
      integer.  Consumers can assume that the count refers to distinct
      data points rather than a count of aggregations (for example,
      individual votes rather than aggregated vote counts) unless it is
      specified out-of-band that some other interpretation is more
      appropriate.  The units are deliberately not normatively

Borenstein & Kucherawy    Expires March 2, 2014                 [Page 4]
Internet-Draft            Reputation Media Type              August 2013

      specified, since not all reputation service providers will collect
      data the same way.

   generated:  A timestamp indicating when this value was generated.
      Expressed as the number of seconds since January 1, 1970 00:00
      UTC.

   expires:  A timestamp indicating a time beyond which the score
      reported is likely not to be valid.  Expressed as the number of
      seconds since January 1, 1970 00:00 UTC.  See Section 5 for
      discussion.

   A particular application that registers itself with IANA (per
   Section 7.2, below) can define additional application-specific
   attribute/value pairs beyond these standard ones.

   An application service provider might operate with an enhanced form
   of common services, which might in turn prompt development and
   reporting of specialized reputation information.  The details of the
   enhancements and specialized information are beyond the scope of this
   document, except that the underlying JSON syntax is extensible for
   encoding such provider-specific information.

4.  Ratings

   The score presented as the value in the rating attribute appears as a
   floating point value between 0.0 and 1.0 inclusive.  The intent is
   that the definition of an assertion within an application will
   declare what the anchor values 0.0 and 1.0 specifically mean.
   Generally speaking, 1.0 implies full agreement with the assertion,
   while 0.0 indicates no support for the assertion.

   The definition will also specify the type of scale in use when
   generating scores, to which all reputation service providers for that
   application space must adhere.  This will allow a client to change
   which reputation service provider is being queried for a given
   without having to learn through some out-of-band method what the new
   provider's values mean.  For example, a registration might state that
   ratings are linear, which would mean a score of "x" is twice as
   strong as a value of "x/2".  It also allows easier aggregation of
   ratings collected from multiple reputation service providers.

5.  Caching

   A reputon can contain an "expires" field indicating a timestamp after
   which the client SHOULD NOT use the rating it contains, and SHOULD

Borenstein & Kucherawy    Expires March 2, 2014                 [Page 5]
Internet-Draft            Reputation Media Type              August 2013

   issue a new query.

   This specificaiton does not mandate any caching of ratings on the
   part of the client, but there are obvious operational benefits to
   doing so.  In the context of reputation, a cached (and hence, stale)
   rating can cause desirable traffic to be identified as undesirable,
   or vice-versa.

   Reputation data is typically most volatile when the subject of the
   reputation is young.  Accordingly, if a service chooses to include
   expiration timestamps as part a reply, these values SHOULD be lower
   for subjects about which little data has been collected.

6.  Reputon Structure

6.1.  Syntax

   A reputon expressed in JSON consists of an object that itself
   contains zero or more objects whose names are "reputon".  Each
   reputon object is a set of key-value pairs, where the keys are the
   names of particular attributes that comprise a reputon (as listed
   above, or as provided with specific applications), and values are the
   content associated with those keys.  The set of keys that make up a
   reputon within a given application are known as that application's
   "response set".

   A reputon object typically contains a reply corresponding to the
   assertion for which a client made a specific request.  For example, a
   client asking for assertion "sends-spam" about domain "example.com"
   would expect a reply consisting of a reputon making a "sends-spam"
   assertion about "example.com" and nothing more.  If a client makes a
   request about a subject but does not specify an assertion of
   interest, the server can return reputons about any assertion for
   which it has data; in effect, the client has asked for any available
   information about the subject.  A client that receives an irrelevant
   reputon simply ignores it.

   An empty reputon is an acknowledgement by the server that the request
   has been received, and serves as a positive indication that the
   server does not have the information requested.  This is semantically
   equivalent to returning a reputon with a "sample-size" of zero.

6.1.1.  Formal Definition

   Using [ABNF], the syntax of a reputon is:

Borenstein & Kucherawy    Expires March 2, 2014                 [Page 6]
Internet-Draft            Reputation Media Type              August 2013

     reputon = "{" [ reputon-object
         *(value-separator reputon-object) ] "}"

     reputon-object = "reputon" name-separator response-set

     response-set = "{" reputon-element
         *(value-separator reputon-element) "}

     reputon-element = rater-value / assertion-value / rated-value
                       / rating-value / conf-value / auth-value
                       / sample-value / gen-value / expire-value
                       / ext-value
         ; these can appear in any order, but MUST appear at most
         ; once each

     rater-value = %x22 "rater" %x22 name-separator string

     assertion-value = %x22 "assertion" %x22 name-separator string

     rated-value = %x22 "rated" %x22 name-separator string

     rating-value = %x22 "rating" %x22 name-separator number
         ; "number" MUST be between 0.0 and 1.0 inclusive

     conf-value = %x22 "confidence" %x22 name-separator number
         ; "number" MUST be between 0.0 and 1.0 inclusive

     auth-value = %x22 "rater-authenticity" %x22 name-separator number
         ; "number" MUST be between 0.0 and 1.0 inclusive

     sample-value = %x22 "sample-size" %x22 name-separator int
         ; "int" MUST NOT be negative

     gen-value = %x22 "generated" %x22 name-separator int
         ; "int" MUST NOT be negative

     expire-value = %x22 "expires" %x22 name-separator int
         ; "int" MUST NOT be negative

     ext-value = member
         ; specific syntax is specified in specific application
         ; registrations

   The tokens "value-separator", "name-separator", "string", "int", and
   "member" are defined in [JSON].

Borenstein & Kucherawy    Expires March 2, 2014                 [Page 7]
Internet-Draft            Reputation Media Type              August 2013

6.2.  Examples

   The following simple example:

     Content-type: application/reputon+json

     {
       "reputon":
       {
         "rater": "RatingsRUs.example.com",
         "rater-authenticity": 1.0,
         "assertion": "is-good",
         "rated": "Alex Rodriguez",
         "rating": 0.99,
         "sample-size": 50000
       }
     }

   ...indicates we are absolutely sure (1.0) that the entity
   "RatingsRUs.example.com" consolidated 50000 data points (perhaps from
   everyone in Yankee Stadium) and concluded that Alex Rodriguez is very
   very good (0.99) at something.  It doesn't tell us what he's good at,
   and while it might be playing baseball, it could just as well be
   paying his taxes on time.

   A more sophisticated usage would define a baseball application with a
   response set of specific assertions, so that this example:

     Content-type: application/reputon+json; context="baseball"

     {
       "reputon":
       {
         "rater": "baseball-reference.example.com",
         "rater-authenticity": 1.0,
         "assertion": "hits-for-power",
         "rated": "Alex Rodriguez",
         "rating": 0.99,
         "sample-size": 50000
       }
     }

   ...would indicate that 50000 fans polled by the entity baseball-
   reference.example.com rate Alex Rodriguez very highly in hitting for
   power, whereas this example:

Borenstein & Kucherawy    Expires March 2, 2014                 [Page 8]
Internet-Draft            Reputation Media Type              August 2013

     Content-type: application/reputon+json; context="baseball"

     {
       "reputon":
       {
         "rater": "baseball-reference.example.com",
         "rater-authenticity": 1.0,
         "assertion": "clutch-hitter",
         "rated": "Alex Rodriguez",
         "rating": 0.4,
         "confidence": 0.2,
         "sample-size": 50000
       }
     }

   ...would indicate that a similar poll indicated a somewhat weak
   consensus that Alex Rodriguez tends to choke in critical baseball
   situations.

   In practice, it is expected that most reputons will have an "context"
   parameter to target an application-specific set of assertions.

   The following is an example reputon generated using this schema,
   including the media type definition line that idenfities a specific
   reputation application context.  Here, reputation agent
   "rep.example.net" is asserting within the context of the "email-id"
   application (see [I-D.REPUTE-EMAIL-IDENTIFIERS]) that "example.com"
   appears to be associated with spam 1.2% of the time, based on just
   short of 17 million messages analyzed or reported to date.  The
   "email-id" application has declared the extension key "identity" to
   indicate how the subject identifier was used in the observed data,
   establishing some more specific semantics for the "rating" value.  In
   this case, the extension is used to show the identity "example.com",
   the subject of the query, is extracted from the analyzed messages
   using the [DKIM] "d=" parameter for messages where signatures
   validate.  The reputation agent is 95% confident of this result.
   (See [I-D.REPUTE-EMAIL-IDENTIFIERS] for details about the registered
   email identifiers application.)

Borenstein & Kucherawy    Expires March 2, 2014                 [Page 9]
Internet-Draft            Reputation Media Type              August 2013

     Content-Type: application/reputon+json; context="email-id"

     {
       "reputon":
       {
         "rater": "rep.example.net",
         "rater-authenticity": 0.95,
         "assertion": "spam",
         "identity": "dkim",
         "rated": "example.com",
         "rating": 0.012,
         "sample-size": 16938213,
         "updated": 1317795852
       }
     }

7.  IANA Considerations

   This document presents two actions for IANA, namely the creation of
   the new media type "application/reputon+json" and the creation of a
   registry for reputation application types.  Another document in this
   series creates an initial registry entry for the latter.

7.1.  application/reputon+json Media Type Registration

   This section provides the media type registration application from
   [MIME-REG] for processing by IANA:

   To:  media-types@iana.org

   Subject:  Registration of media type application/reputon+json

   Type name:  application

   Subtype name:  reputon+json

   Required parameters:  none

   Optional parameters:

      context:  Names the reputation application in use within the
         reputon, which defines the valid assertions and any extensions
         that may also be valid (i.e., the response set) for that
         application.  These are registered with IANA in the Reputation
         Application Registry as described in Section 7.2.

Borenstein & Kucherawy    Expires March 2, 2014                [Page 10]
Internet-Draft            Reputation Media Type              August 2013

   Encoding considerations:  "7bit" encoding is sufficient and is used
      to maintain readability when viewed by non-MIME mail readers.

   Security considerations:  See Section 8 of [this document].

   Interoperability considerations:  Implementers may encounter "app"
      values, attribute/value pairs, or response set items that they do
      not support, which are to be ignored.

   Published specification:  [this document]

   Applications that use this media type:  Any application that wishes
      to query a service that provides reputation data using the "long
      form" defined in [I-D.REPUTE-QUERY-HTTP].  The example application
      is one that provides reputation expressions about DNS domain names
      found in email messages.

   Additional information:  The value of the "app" parameter is
      registered with IANA.

   Person and email address to contact for further information:

         Nathaniel Borenstein <nps@guppylake.com>

         Murray S. Kucherawy <msk@cloudmark.com>

   Intended usage:  COMMON

   Author:

         Nathaniel Borenstein

         Murray S. Kucherawy

   Change controller:  IESG

7.2.  Reputation Applications Registry

   IANA is requested to create the "Reputation Applications" registry.
   This registry will contain names of applications used with the
   application/reputon+json media type (and other media types that carry
   reputons), as defined by this document.

   New registrations or updates are published in accordance with the
   "Specification Required" guidelines as described in
   [IANA-CONSIDERATIONS].

   New registrations and updates are to contain the following

Borenstein & Kucherawy    Expires March 2, 2014                [Page 11]
Internet-Draft            Reputation Media Type              August 2013

   information:

   1.  Name of the application being registered or updated

   2.  Short description of the application (i.e., the class of entity
       about which it reports reputation data)

   3.  The document in which the application is defined

   4.  New or updated status, which is to be one of:

       current:  The application is in current use

       deprecated:  The application is in current use but its use is
          discouraged

       historic:  The application is no longer in current use

   5.  A description of the subject of a query within this reputation,
       and a legal syntax for the same

   6.  An optional table of query parameters that are specific to this
       application; each table entry must include:

       Name:  Name of the query parameter

       Status:  (as above)

       Description:  A short description of the purpose of this
          parameter

       Syntax:  A reference to a description of valid syntax for the
          parameter's value

       Required:  "yes" if the parameter is mandatory, "no" otherwise

   7.  A list of one or more assertions registered within this
       application; each table entry is to include:

       Name:  Name of the assertion

       Description:  A short description of the assertion, with specific
          meanings for values of 0.0 and 1.0

       Scale:  A short description of the scale used in computing the
          value (see Section 4 of this document)

Borenstein & Kucherawy    Expires March 2, 2014                [Page 12]
Internet-Draft            Reputation Media Type              August 2013

   8.  An optional list of one or more response set extension keys for
       use within this application; each table entry is to include:

       Name:  Name of the extension key

       Description:  A short description of the key's intended meaning

       Syntax:  A description of valid values that can appear associated
          with the key

   The names of attributes registered should be prefixed by the name of
   the application itself (e.g., the "foo" application registering a
   "bar" attribute should call it "foo-bar") to avoid namespace
   collisions.

8.  Security Considerations

   This document is primarily an IANA action registering a media type.
   It does not describe a new protocol that might introduce security
   considerations.

   Discussion of the security and operational impacts of using
   reputation services in general can be found throughout
   [I-D.REPUTE-CONSIDERATIONS].

9.  References

9.1.  Normative References

   [ABNF]     Crocker, D. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", STD 68, RFC 5234, January 2008.

   [I-D.REPUTE-MODEL]
              Borenstein, N. and M. Kucherawy, "A Model for Reputation
              Interchange", draft-ietf-repute-model (work in progress),
              November 2012.

   [I-D.REPUTE-QUERY-HTTP]
              Borenstein, N. and M. Kucherawy, "Reputation Data
              Interchange using HTTP and XML",
              draft-ietf-repute-query-http (work in progress),
              November 2012.

   [JSON]     Crockford, D., "The application/json Media Type for
              JavaScript Object Notation (JSON)", RFC 4627, July 2006.

Borenstein & Kucherawy    Expires March 2, 2014                [Page 13]
Internet-Draft            Reputation Media Type              August 2013

   [KEYWORDS]
              Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

9.2.  Informative References

   [DKIM]     Crocker, D., Ed., Hansen, T., Ed., and M. Kucherawy, Ed.,
              "DomainKeys Identified Mail (DKIM) Signatures", RFC 6376,
              September 2011.

   [HTTP]     Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
              Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.

   [I-D.REPUTE-CONSIDERATIONS]
              Kucherawy, M., "Operational Considerations Regarding
              Reputation Services", draft-ietf-repute-considerations
              (work in progress), November 2012.

   [I-D.REPUTE-EMAIL-IDENTIFIERS]
              Borenstein, N. and M. Kucherawy, "A Reputation Vocabulary
              for Email Identifiers",
              draft-ietf-repute-email-identifiers (work in progress),
              November 2012.

   [IANA-CONSIDERATIONS]
              Narten, T. and H. Alvestrand, "Guidelines for Writing an
              IANA Considerations Section in RFCs", RFC 5226, May 2008.

   [MIME-REG]
              Freed, N. and J. Klensin, "Media Type Specifications and
              Registration Procedures", RFC 4288, December 2005.

Appendix A.  Acknowledgments

   The authors wish to acknowledge the contributions of the following to
   this specification: Frank Ellermann, Tony Hansen, Jeff Hodges, Simon
   Hunt, John Levine, David F. Skoll, and Mykyta Yevstifeyev.

Appendix B.  Public Discussion

   Public discussion of this suite of documents takes place on the
   domainrep@ietf.org mailing list.  See
   https://www.ietf.org/mailman/listinfo/domainrep.

Borenstein & Kucherawy    Expires March 2, 2014                [Page 14]
Internet-Draft            Reputation Media Type              August 2013

Authors' Addresses

   Nathaniel Borenstein
   Mimecast
   203 Crescent St., Suite 303
   Waltham, MA  02453
   USA

   Phone: +1 781 996 5340
   Email: nsb@guppylake.com

   Murray S. Kucherawy
   270 Upland Drive
   San Francisco, CA  94127
   USA

   Email: superuser@gmail.com

Borenstein & Kucherawy    Expires March 2, 2014                [Page 15]