YANG Data Model for Segment Routing

The information below is for an old version of the document
Document Type Expired Internet-Draft (spring WG)
Authors Stephane Litkowski  , Yingzhen Qu  , Pushpasis Sarkar  , Jeff Tantsura 
Last updated 2018-12-30 (latest revision 2018-06-28)
Replaces draft-litkowski-spring-sr-yang
Stream Internet Engineering Task Force (IETF)
Expired & archived
plain text htmlized pdfized bibtex
Stream WG state WG Document
Document shepherd Rob Shakir
IESG IESG state Expired
Consensus Boilerplate Unknown
Telechat date
Responsible AD (None)
Send notices to Rob Shakir <robjs@google.com>

This Internet-Draft is no longer active. A copy of the expired Internet-Draft can be found at


This document defines a YANG data model ([RFC6020], [RFC7950]) for segment routing ([I-D.ietf-spring-segment-routing]) configuration and operation. This YANG model is intended to be used on network elements to configure or operate segment routing. This document defines also generic containers that SHOULD be reused by IGP protocol modules to support segment routing.


Stephane Litkowski (stephane.litkowski@orange.com)
Yingzhen Qu (yingzhen.qu@huawei.com)
Pushpasis Sarkar (pushpasis.ietf@gmail.com)
Jeff Tantsura (jefftant.ietf@gmail.com)

(Note: The e-mail addresses provided for the authors of this Internet-Draft may no longer be valid.)